1,580
edits
Changes
Jump to navigation
Jump to search
Line 86:
Line 86: − +
Sawstop Industrial Table Saw (view source)
Revision as of 19:58, 14 October 2022
, 19:58, 14 October 2022→Sacrificial Fence
The sacrificial fence is placed on top of the standard table saw rip fence and secured with the screws on the back side. Ensure that the fence is square to the table while tightening the set screws, and that the fence is flush with the front of the rip fence. Then, slide the fence over top of the dado stack, adjusting the fence for the desired rebate width. Adjust the blade height for the desired depth of rebate.
The sacrificial fence is placed on top of the standard table saw rip fence and secured with the screws on the back side. Ensure that the fence is square to the table while tightening the set screws, and that the fence is flush with the front of the rip fence. Then, slide the fence over top of the dado stack, adjusting the fence for the desired rebate width. Adjust the blade height for the desired depth of rebate.
It is stored in the outfeed table. See the table saw jigs page. [https://wiki.pumpingstationone.org/Tablesaw_jigs_and_sleds. Sleds n jigs.]
It is stored in the outfeed table. See the table saw jigs page. [https://wiki.pumpingstationone.org/Tablesaw_jigs_and_sleds. Sleds][https://wiki.pumpingstationone.org/Tablesaw_jigs_and_sleds. Sleds n jigs.]
See: https://www.youtube.com/watch?v=JYqvwlbm6B0 beginning at minute 8 for a demonstration of how the sacrificial fence works.
See: https://www.youtube.com/watch?v=JYqvwlbm6B0 beginning at minute 8 for a demonstration of how the sacrificial fence works.