Shop Fox 8" Plate Shear
Jump to navigation
Jump to search
This tool is currently broken, please contact the area host for more information. |
Owner/Loaner | Michael Skilton |
---|---|
Serial Number | {{{serial}}} |
Make/Model | M1040 |
Arrival Date | 2013 |
Usability | Working |
Contact | Michael Skilton |
Where | Machine Shop |
Authorization Needed | No |
Hackable | No |
Estimated Value | $100 |
Host Area | {{{hostarea}}} |
Note
Primarily designed for straight cuts in sheet metal.
Nothing harder then mild steel.
The knurled knob is meant to be a clamp and is helpful for thicker materials.
Flat stock only on the blades, No channel or angle etc.
No rod or wire except in the hole.
It will cut 1/8 mild steel and 1/2" rod but I recommend 12 gauge sheet and 3/8 diameter as maximums.
Pull slowly and be prepared for a jolt if you are pulling hard at the end of a cut.