197
edits
Changes
Jump to navigation
Jump to search
Line 9:
Line 9: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Line 58:
Line 90: − ====Spindle Speed==== − − '''My speeds aren’t changing on my Spindle when I run the warm-up routine and during cut files. What is the problem?''' − − *Note: On ShopBot desktops and MAX, the RPM must be manually adjusted. − − The Spindle RPM Control window needs to be open in order for the spindle to change speed. If you see this window pop up during the warm-up routine or software start-up, do not close it. To open it manually, type TR in the ShopBot console (the blank box next to the ShopBot CNC logo). Click on RPM to open the fill-in sheet, and make sure that the correct VFD is selected. Start when SB3 start is set to 1, and the Hz scale is set to 60 for a V1000 spindle and to 100 for a 74X spindle. − The RPM Control window is not available on software versions earlier than 3.6.X. − − Perhaps the fact that this can be done via console means that it could also be added to Gcode files by the post-processor? I'm not really sure. I did just notice this, though, a bit lower down in the FAQ: − − '''I want the RPM Control Window to open every time I start ShopBot 3''' − − This can be accomplished in one of two ways: − − 1) ...blah blah blah... − − 2) Navigate to C:\Program Files (x86)\ShopBot\Virtual Tools. Open this file with a text − editor like Notepad or SBEdit. Edit this one line of code: − − VT = Spindle [&R]PM Control, Virtual Tools\Spindle Control\Spindle Control.exe, 0, 0 − − Change the last number, which is a zero, to one. It will now look like this: − − VT = Spindle [&R]PM Control, Virtual Tools\Spindle Control\Spindle Control.exe, 0, 1 − − Save the file, close and reopen the SB3 software to see the changes take effect. − − '''''This needs to be done only once for your Shopbot login.'''''
→Spindle Speed
== Positioning your work ==
== Positioning your work ==
== Feeds and speeds==
== Feeds and speeds==
====Spindle Speed====
The Shopbot does not pick up spindle speed instructions unless you have first opened up the Spindle RPM Control menu (under Tools):
[[File:spindle-control-menu2.png]]
'''My speeds aren’t changing on my Spindle when I run the warm-up routine and during cut files. What is the problem?'''
*Note: On ShopBot desktops and MAX, the RPM must be manually adjusted.
The Spindle RPM Control window needs to be open in order for the spindle to change speed. If you see this window pop up during the warm-up routine or software start-up, do not close it. To open it manually, type TR in the ShopBot console (the blank box next to the ShopBot CNC logo). Click on RPM to open the fill-in sheet, and make sure that the correct VFD is selected. Start when SB3 start is set to 1, and the Hz scale is set to 60 for a V1000 spindle and to 100 for a 74X spindle.
The RPM Control window is not available on software versions earlier than 3.6.X.
Perhaps the fact that this can be done via console means that it could also be added to Gcode files by the post-processor? I'm not really sure. I did just notice this, though, a bit lower down in the FAQ:
'''I want the RPM Control Window to open every time I start ShopBot 3'''
This can be accomplished in one of two ways:
1) ...blah blah blah...
2) Navigate to C:\Program Files (x86)\ShopBot\Virtual Tools. Open this file with a text
editor like Notepad or SBEdit. Edit this one line of code:
VT = Spindle [&R]PM Control, Virtual Tools\Spindle Control\Spindle Control.exe, 0, 0
Change the last number, which is a zero, to one. It will now look like this:
VT = Spindle [&R]PM Control, Virtual Tools\Spindle Control\Spindle Control.exe, 0, 1
Save the file, close and reopen the SB3 software to see the changes take effect.
'''''This needs to be done only once for your Shopbot login.'''''
===Drilling===
===Drilling===
===MILLING===
===MILLING===
====Recommended Feed and Speed Rates====
====Recommended Feed and Speed Rates====