225
edits
Changes
From Pumping Station One
Universal PLS6.150D 150W Laser Engraver (view source)
Revision as of 00:47, 5 October 2018
, 00:47, 5 October 2018no edit summary
| owner=PS:One
| owner=PS:One
| model=PLS6.150D
| model=PLS6.150D
| serial=SERIAL NUMBER
| serial=PLS6150DXX082911106339
| arrived= August 2017
| arrived= August 2017
| doesitwork=yes
| doesitwork=yes
| contact=[[CNC|CNC Area Host]]
| contact=[[CNC|Lasers Area Host]]
| where=CNC Shop
| where=CNC Shop
| certification=yes
| certification=yes
| value=$17,000
| value=$17,000
| image = tbd
| image = tbd
| hostarea = CNC
| hostarea = Lasers
}}
}}
The Universal Laser Systems PLS6.150D is a free-standing platform with a materials processing envelope of 32" x 18" x 9" or 5,184 in³ (813 x 457 x 229 mm or 84,950 cm³) that supports dual lasers. As a dual laser platform, the PLS6.150 can support up to two 10.6µ CO2 lasers with a power range of 10 watts to 150 watts. Additionally, it can support a single 9.3µ CO2 of 30, 50 or 75 watts. (if a 9.3u CO2 laser is installed, only one 10.6 CO2 of up to 75 watts may be installed at the same time.)
The Universal Laser Systems PLS6.150D is a free-standing platform with a materials processing envelope of 32" x 18" x 9" or 5,184 in³ (813 x 457 x 229 mm or 84,950 cm³) that supports dual lasers. As a dual laser platform, the PLS6.150 can support up to two 10.6µ CO2 lasers with a power range of 10 watts to 150 watts. Additionally, it can support a single 9.3µ CO2 of 30, 50 or 75 watts. (if a 9.3u CO2 laser is installed, only one 10.6 CO2 of up to 75 watts may be installed at the same time.)
Ours has two 75w lasers totalling 150w of power.
Ours has two 75w lasers totaling 150w of power.
The unit was donated from SAIC.
The unit was donated from SAIC.
