21
edits
Changes
From Pumping Station One
Universal PLS6.150D 150W Laser Engraver (view source)
Revision as of 17:53, 12 January 2024
, 12 January→Authorization: How to Get Authorized
| contact=[[CNC|Lasers Area Host]]
| contact=[[CNC|Lasers Area Host]]
| where=CNC Shop
| where=CNC Shop
| certification=yes ([email protected])
| certification=yes
| hackable=no
| hackable=no
| value=$17,000
| value=$17,000
| image = tbd
| image = UniversalLaser.jpeg
| hostarea = Lasers
| hostarea = Lasers
}}
}}
== Status ==
== Status ==
CURRENT UPDATES
[https://docs.google.com/spreadsheets/d/1Lo9PNANkkx4Dl1Sy7DjJ_oA8nAStV7FFLykrrypabKM/edit?usp=sharing * CLICK TO VIEW CURRENT STATUS OF ALL LASER SYSTEMS] *
OLD NEWS
* 6/27/2019 Universal was repaired by Scientific Spectrum Midwest to full functionality. Need to fix air supply before the Universal is put back into service. See required parts needed [[Media:Air_Assist_Parts_Assembly.doc ]] See [[Media:2_Table_Calibration_Platform_Lasers.pdf]] and [[Media:5_Cleaning_and_Maintenance.pdf]] for maintenance. If you need to get familiar with the universal, please checkout out [[Media:6_Keep_these_thoughts_in_mind_when_creating_a_drawing.pdf]] and [[Media:7 Laser procedure.pdf]]
* 6/27/2019 Universal was repaired by Scientific Spectrum Midwest to full functionality. Need to fix air supply before the Universal is put back into service. See required parts needed [[Media:Air_Assist_Parts_Assembly.doc ]] See [[Media:2_Table_Calibration_Platform_Lasers.pdf]] and [[Media:5_Cleaning_and_Maintenance.pdf]] for maintenance. If you need to get familiar with the universal, please checkout out [[Media:6_Keep_these_thoughts_in_mind_when_creating_a_drawing.pdf]] and [[Media:7 Laser procedure.pdf]]
* 5/19/2019 Universal laser is not working. Ask the Area Host at [email protected] for more information.
* 5/19/2019 Universal laser is not working. Ask the Area Host at [email protected] for more information.
== Authorization: How to Get Authorized ==
== Authorization: How to Get Authorized ==
Authorization for the laser is not viral, meaning you must seek out a Volunteer Authorizer.
Authorization for the laser is not virtual, meaning you must complete this [https://canvas.pumpingstationone.org/courses/17 Canvas Course] and '''then''' fill out this [https://forms.gle/4xYHJPeSXi4qt5738 Sign Up Form].
If no authorizations are scheduled in the next 30 days, then post on the Google Group email list or #lasers slack channel; look for a recent thread about laser authorizations and post there.
The laser volunteers will be notified automatically after the form is submitted. You will then be notified when the next authorization is scheduled. (approx. every 2 weeks at the authorizers discretion)
If no authorizations are scheduled in the next 30 days, then post to #lasers slack channel; look for a recent thread about laser authorizations and post there.
Please review the wiki and the reference materials before attending an authorization.
Please review the wiki and the reference materials before attending an authorization.
If you have other questions after the reviewing the wiki, Please reach out on #lasers slack channel, respond to a recent authorization thread, and if you still need help then try a direct message to the authorizers at [email protected] .
== Usage Policy ==
The laser cutter is easily one of the most used machines at PS1. Due to this demand we request the cooperation of all members to share the laser cutter and associated computer. First and foremost, the practice "being excellent" should be observed at all times; respect yourself, other members, and the equipment. This is a usage policy so that everyone can use the laser:
* Any user not actively test cutting or cutting will cede the computer and laser to the next person waiting in line, as soon as that waiting user notifies the current computer user. If you are still designing your file, please do so on another computer. Artastic (another PC upstairs) in the Crafts Area also has a copy of Adobe Illustrator.
* If someone is waiting in line to use the laser, no active test cut or cut series shall be longer than 1 hour. No jobs will be allowed to start that overrun the 1 hour time limit when a new user is waiting.
* In the case that your last cut is longer than the 1 hour time limit, and a waiting user presents themselves after the cut has started, the cut job shall be allowed to finish and the waiting user will be allowed to set up their file in their own user account, during the cutting period.
* Continuous cutting shall not exceed 3 consecutive hours without a half hour break for the laser to cool. If a new user arrives before or during the cooling period the current user shall cede the laser to the next user, and the next user will wait for the cooling period to finish and the cooling period shall not count towards the 1 hours limit should another user present themselves.
* Waiting users shall notify the current user verbally that they are waiting and where they will be waiting until it is their turn. If multiple users are waiting, the next waiting user must start their test cutting or cut job within 10 minutes of being notified of a laser opening. The current user will keep a record of who is waiting, where they will be, and notify subsequent users of the status of the queue. The current user will find the next waiting user and verbally inform them that the laser is available.
=== Additional Ways to be Excellent ===
* Have your artwork and your materials prepared and ready ahead of time. Artastic (another PC upstairs) in the Crafts Area has a copy of Adobe Illustrator.
* Allow people to start setting up their job after your last cut starts running. If you're concerned about a last minute adjustment, you can use Window's switch user feature to keep your file available.
* If there is someone waiting, get their phone number to text them, if possible. Texting allows you to give them a heads up so they can start setting up their job without you leaving the laser are. (Leaving the laser running unattended is against the rules.) It also spares you from having to physically track down the other user.
=== Table Saw Note! ===
Items that have been cut on the laser cutter have the potential to set off the SawStop table saw safety brake. This will make the saw unusable until the SawStop cartridge is replaced, which costs ~ $75! It typically happens if there is an excess of carbon char on the edges.
Before use the SawStop to cut anything from the laser cutter please test the piece on the edge of the blade when the blade is not turning and see if it activates a red light on the display. How do you do this.
# Turn on the main power switch to the Sawstop.
# DO NOT TURN ON THE BLADE. THE BLADE must not be moving.
# Check and see if the green light is on the front of the saw.
# Slide the piece you want to cut up to and contact the blade.
# Look at the lights on the front of the SawStop. If it is green you should be OK to proceed. If its red. DO NOT CUT. IT WILL TRIGGER THE BRAKE.
You can try to sand off the char and repeat steps 1-5 or use another method to cut these pieces.
== References and Manuals ==
== References and Manuals ==
* [[Media:Illustrator and Photoshop Setup and Basic Operation.pdf|Illustrator and Photoshop basic setup and operation]]
* [[Media:Illustrator and Photoshop Setup and Basic Operation.pdf|Illustrator and Photoshop basic setup and operation]]
* [[Media:Universal PLS6.150D user guide.pdf|Universal Laser PLS6.150D User Manual]]
* [[Media:Universal PLS6.150D user guide.pdf|Universal Laser PLS6.150D User Manual]]
* [https://sites.saic.edu/aoc/laser-cutting/lasermaterials/| Materials Settings Reference]
* [https://sites.saic.edu/aoc/laser-cutting/lasermaterials/ Materials Settings Reference]
* [[Media:6_Keep_these_thoughts_in_mind_when_creating_a_drawing.pdf]]
* [[Media:6_Keep_these_thoughts_in_mind_when_creating_a_drawing.pdf]]
* [[Media:7 Laser procedure.pdf]]
* [[Media:7 Laser procedure.pdf]]
The unit was donated from SAIC.
The unit was donated from SAIC.
Machine Dimensions are 45" x 35" x 40".
== Procedures ==
== Procedures ==
=== Exhaust ===
=== Exhaust ===
* Turn on the Exhaust Fan by flipping the switch on the gray box to the left of the Boss Laser.
* Turn on the Exhaust Fan by pressing the Green Button on the Pillar opposite the 3D printers.
* It is always good practice to open the Make-up Air Window to allow fresh air to circulate while running a job.
* It is always good practice to open the Make-up Air Window to allow fresh air to circulate while running a job.
=== Powering On Machine ===
=== Powering On Machine ===
|-
|-
| Foamcore
| Foamcore
| Foamcore is an expanded polystyrene and is known to emit styrene fumes when cut.
| Foamcore is an expanded polystyrene and is known to emit styrene fumes when cut. It is also very flammable after repeated cuts
|}
|}
== Maintenance ==
== Maintenance ==
Please note that ONLY authorized maintainers are allowed to perform regular maintenance.
Please note that ONLY authorized maintainers are allowed to perform regular maintenance.
== Maintenance Files ==
**Do Not Throw Way Old Lens or Mirror Frames for the Universal. They can be repurposed with 3rd Party lens/mirrors for 1/5 the cost and the same performance.**
* Replacement mirrors for the universal are very expensive because they semi-circular. However, they are simply a 25mm radius mirror that can be grounded down. The files for 3D printing the guides are here[https://drive.google.com/drive/folders/1d0jqYUwdTXVxafVrquHKa0RhF3BgHpDw?usp=sharing}]. Protect the mirrored surface when grinding, then super glue the new mirror to available mounting frames.
[https://wiki.pumpingstationone.org/Universal_Maintenance Universal Maintenance]
[https://wiki.pumpingstationone.org/Universal_Maintenance Universal Maintenance]
! Trained By
! Trained By
! Date
! Date
|-
|Ellen Lustig
|Rob German
|10/1/2020
|-
|-
|[[user:mvictoras|Victor Mateevitsi]]
|[[user:mvictoras|Victor Mateevitsi]]
|-
|-
|-
|-
|[[Amethystdragon]]
|[[User:Amethystdragon|Karl Schmidbauer]]
|Casimir Leja
|Casimir Leja
|2020-10-11
|2020-10-11
