Vinyl Cutter
Jump to navigation
Jump to search
 | This tool is currently broken, please contact the area host for more information. |
| Owner/Loaner | Donald Jacobson |
|---|---|
| Make/Model | Jaguar II |
| Arrival Date | 2012 |
| Usability | WORKING |
| Contact | Donald Jacobson |
| Where | Shop |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $300 |
| Host Area | {{{hostarea}}} |
| Qualified Member | Trained By |
|---|---|
| Donald Jacobson | Donald Jacobson |
| Bart dring | Donald Jacobson |
Tips on how to use (After Certified)
Loading the Media.
- Raise the lever on the upper back right of the machine
- Slide in the media. It helps to have a rectangular piece so the machine can recognize the size. Center it over some of the grooved rollers so they are as close to the edges as possible.
- Slide the pinch rollers from behind over the grooved roller you chose.
- Lower roller with the lever.
- Read the display and push the arrow button for the type of media you are loading.
Importing Files.
The software can import a lot of formats, but it is very old, so it needs old versions of the file formats. The software has a Copyright date of 1991-2001. You can use DXF files, but I found the the version had to be a pre 2000 version. I used DXF Rev 12 ASCII format for example. Some formats have not changed in years like HPGL and are good to use.
- AutoCAD DXF R12 ASCII
- HPGL