ER25 Tooling
From Pumping Station One
A set of ER25 tooling.
 | This tool is no longer at the space. Find what actually exists at PS1 on the Equipment page.  |
 | |
| Owner/Loaner | McTavish McArdle |
|---|---|
| Serial Number | 69053 02866 (collet set) |
| Make/Model | 3900-5235 (collet set) |
| Arrival Date | 2018-02-24 |
| Usability | yes |
| Contact | McTavish McArdle |
| Where | Removed |
| Authorization Needed | no |
| Hackable | no |
| Estimated Value | $200 |
| Host Area | Cold Metals |
Contents
This tooling set includes:
- A 15-piece set of ER25 collets, in 1/16" increments, from 1/16" to 5/8" (the full range of the collet size)
- Two ER25 collet blocks; for both blocks, the nut is larger than the block diameter, so careful work holding is needed
- A square collet block, 35mm across & ~42mm tall
- A hex collet block, 35mm across (minor diameter) & ~42mm tall
- An ER25 collet holder, with an integral R8 taper
- [Note that the runout on this collet holder is rather horrific, and it will need to be reground before it will be useful]
- An ER25 collet nut spanner (affixed by magnets to the inside top of the box)
