Miller Dynasty 280DX
 | |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | MF330991L |
| Make/Model | Miller Dynasty 280DX |
| Arrival Date | September, 2015 |
| Usability | yes |
| Contact | Ron Olson |
| Where | Hot Metals |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $6800 |
| Host Area | Hot Metals |
Description
- TIG Welder
- The Dynasty 280 Series is a powerful combination of capability and portability. Weighing only 52 pounds, it can weld up to 3/8" thick material. The AC/DC TIG/Stick power sources feature an energy-efficient inverter design and Auto-Line™ technology.
Status
Works!
Authorization
Ask the Hot Metals rep at Hot Metals Office Hours. See the PS1 calendar for office hours.
Official Information
Torch Parts
As of early 2017, torch parts were considered to be consumables that were not going to be readily replenished by the area host due to abused and lost parts. As of June 2017, there were not enough torch parts to fully assemble a torch in either storage location (the clear divider in the Hot Metals tool cart, the yellow/black toolbox in the Hot Metals storage cabinet). The main part we seem to be missing are the gas lenses.
If you'd like to purchase your own torch parts our torch handle is a W-280. Additional parts can be found on page 3 of this PDF.
Parts can be found on Amazon.com for about $11. This kit of parts appears to fit well and can fully assemble 2 torch heads.
Manual
Manual for the 280DX on Miller Electric's site