Domain Admins
576
edits
Changes
Jump to navigation
Jump to search
Mitsui Surface Grinder (view source)
Revision as of 20:43, 15 February 2017
, 20:43, 15 February 2017Creation, with repair tasks
{{Template:EquipmentPage
|image = mitsui250mh.jpg
|owner=PS:One
|model=Mitsui 250MH
|arrived=Late 2016
|doesitwork=so close
|contact=Area Host (Dean Anderson)
|where=Cold Metals
|certification=yes
|hackable=no
|value=~$3000}}
== Repair ==
All repair needs to be coordinated with the area host.
Motor bearings were replaced, to great success.
# Table ways need to be cleaned.
# Z ways need to be cleaned.
# Grinder needs to be placed in its final location, and then the table bearings replaced.
== Diagnosis ==
After initial repair, diagnosis of further issues will come via a test grind.
# The table will need to be ground in.
# A mag chuck will need to be ground in.
# Five block test can be used as a quick diagnosis.
|image = mitsui250mh.jpg
|owner=PS:One
|model=Mitsui 250MH
|arrived=Late 2016
|doesitwork=so close
|contact=Area Host (Dean Anderson)
|where=Cold Metals
|certification=yes
|hackable=no
|value=~$3000}}
== Repair ==
All repair needs to be coordinated with the area host.
Motor bearings were replaced, to great success.
# Table ways need to be cleaned.
# Z ways need to be cleaned.
# Grinder needs to be placed in its final location, and then the table bearings replaced.
== Diagnosis ==
After initial repair, diagnosis of further issues will come via a test grind.
# The table will need to be ground in.
# A mag chuck will need to be ground in.
# Five block test can be used as a quick diagnosis.