Laguna 16" Planer
Jump to navigation
Jump to search
Owner/Loaner | PS:One |
---|---|
Serial Number | 144367 |
Make/Model | MPLAN1510-0120 |
Usability | yes |
Where | Woodshop |
Authorization Needed | "yes" |
Hackable | "no" |
Estimated Value | $3000 |
Host Area | Woodworking |
Rules
- Always check your wood for nails or staples. Something as small as the staple at the end of a 1x1 can ruin the blades. If you're not sure, check the entire piece with the metal detector sitting on the table saw.
- Always measure the thickness of your work and set the initial and working blade height to remove only small amounts of material per pass. You will damage the blades if you manage to dig the machine out on your work. If it sounds weird, You're Not Doing It Right and you need to ask for help.
- If the blades are dull or damaged, contact the area host immediately. Don't be a dick and let others ruin their work because you didn't say anything.
- If you break something, or damage the tool, contact the area host immediately. Don't let others do more damage or hurt themselves by using a broken tool.
- Always make sure that the dust collection bag isn't too full and is passing air freely.
- Always vacuum the machine, cutting area, and the table around the machine when you are done.
This tool requires authorizationfor use.
Authorization for this tool by authorized proctors only
Authorized Proctors
Matt Triano |
Jason Shanfield |
Ron Olson |
Eric Beauchamp |
List of currently authorized users
Qualified Member | Trained By |
---|---|
Matt Triano | Danger committee |
Eric Beauchamp | Danger committee |
Jason Shanfield | Matt Triano |