Difference between revisions of "HP DesignJet T520 Large Format Color Printer"

From Pumping Station: One Wiki
Jump to: navigation, search
(Currently Authorized Users)
Line 126: Line 126:
 
|[[User:stepcut|Jeremy Shaw]]
 
|[[User:stepcut|Jeremy Shaw]]
 
|Leo Rodman
 
|Leo Rodman
 +
|-
 +
|Erik Wessing
 +
|Ash
 
|-
 
|-
 
}
 
}

Revision as of 21:50, 23 October 2017


HP DesignJet T520 Large Format Color Printer
HP DesignJet T520 from HP com.jpg
Owner/Loaner PS:One
Serial Number CN5546M01D
Make/Model HP T520
Arrival Date July 2015
Usability yes
Contact CNC Area Host
Where CNC Area
Authorization Needed yes
Hackable no
Estimated Value ~$1500
Host Area CNC


HP DesignJet T520 Large Format Color Printer Area: CNC https://wiki.pumpingstationone.org/HP_DesignJet_T520_Large_Format_Color_Printer



Notes

Make sure that the printer is shutdown by pressing the power button by the touch screen, or the head won't move into the park position, and keep the heads clean.

Do not change print cartridges unless the printer prompts you to do so, and you have permission from the area host. For print quality issues see the troubleshooting section below.

This printer will not print without all the cartridges installed and containing some printable ink.

Description

36" Wide format printer, non-archival. "Big Printer"

People using the printer should provide a donation of:

  • $1 per square foot for full coverage color prints (photos/art)
  • $0.25 per square foot for partial coverage prints (text/blue prints/etc)

Some donated media may be provided by the area host, and may be found next to the printer. It is recommended that you provide your own media and that it should be designed for use in a HP designjet printer. Roll media can be up to 36" wide and must be on 2" core.

Example media:

Getting Authorized

Authorizations are viral for this printer. Ask anyone who's already authorized to authorize you.

Troubleshooting

Some common issues that come up with this printer:

1. There are dark bands of ink in the image - This is most likely due to a misaligned print head and can be caused when the cartridges are replaced

  • Solution: Align the print head - On the printer touch screen press the wrench icon (upper right) > Printer Maintenance > Align print head. A patterend page will print and the printer will sense deviations in the print pattern and adjust the head.

2. There are bands of white or partially colored areas - This is most likely due to the printer being left on for an extended period of time or the printer being turned off without being shutdown properly, by pressing the top power button.

  • Solution: Clean the print head - On the printer touch screen press the wrench icon (upper right) > Printer Maintenance > Clean print head. A few gradient bars will print where banding will be visible. There are 3 stages of print head cleaning (the printer will prompt you to go through the stages) printing a page in each stage, that can unclog jets most of the time. If after the 3 stages jets are still clogged, talk to the area host; the print head may need to be serviced or replaced.

3. The print job isn't sending / I get errors on the printer touch screen - Symptoms vary

  • Solution: Make sure you've selected the right driver and settings for your application - Using the HPGL driver for this printer is highly recommended, see driver installation notes below. Make sure that you're also setting the right paper size, paper type, and print quality. The printer does a bunch of checking automatically and gets pissy when what you're sending from the computer doesn't match what is set in the printer.

Setting up the printer on your computer

The Artastic computer is a good place to start to print from, but you may want to print from your own computer.

The Good Way

This method is recommended - when printing make sure to select the driver ending with HPGL.

The best way to install the driver is go to HP's website and install the driver meant for you operating system. Under the section "Driver - Product installation software" you should find a download called something to the effect of "HP Designjet T520 printer series HP-GL/2 and HP RTL Full Feature Solution Installer". This is a lengthier installation but gives you much greater control over print parameters, including selecting custom paper sizes. You have to create and save a custom paper size to get a particular paper dimension in the print dialog.

For Windows 10 driver go here.

The Fast Way

This driver seems to have compatibility issues and is not recommeded.

You can search for devices and install the device via your OS. The dialog that this displays is very clean any easy to use but is lacking in control, in particular specifying custom paper sizes. This particular print dialog only shows the page type and name, so you may want to go find out what the actual dimensions of each paper size are to save a little time.

Currently Authorized Users

Authorizations are now viral for this printer. The following people have been authorized:

}
Certified Member Certified By
Tom Judge N/A
Ron Olson N/A
Jason Shanfield Tom Judge
Mike Mandrea Tom Judge
Simon Pyle Tom Judge
Mark Stevens Tom Judge
Niko Hawley Tom Judge
Tom Boeman Tom Judge
Casey Olson Jason Shanfield
Arturo Duarte Tom Judge
Kevin Mitchell Tom Judge
Bob Loos Andrew Camardella
Sam Paris Andrew Camardella
Erica Tesla Andrew Camardella
Ray Doeksen Jason Shanfield
Shockey Funke Andrew Camardella
Jeremy Shaw Leo Rodman
Erik Wessing Ash