Difference between revisions of "Rockwell drill press"

From Pumping Station: One Wiki
Jump to: navigation, search
(Created page with "{{Template:EquipmentPage |image = boice_crane.jpg |owner=PS:One |model=Boice Crane 24103 24" Power Feed |arrived=January 2015 |serial=23649 |doesitwork=yes |contact=Dean Ander...")
 
Line 1: Line 1:
 
{{Template:EquipmentPage
 
{{Template:EquipmentPage
|image = boice_crane.jpg
+
|image =
 
|owner=PS:One
 
|owner=PS:One
|model=Boice Crane 24103 24" Power Feed
+
|model=Rockwell 17-600 17" Drill Press
|arrived=January 2015
+
|arrived=December 2016
|serial=23649
+
|serial=1456658
 
|doesitwork=yes
 
|doesitwork=yes
 
|contact=Dean Anderson
 
|contact=Dean Anderson
Line 10: Line 10:
 
|certification=yes  
 
|certification=yes  
 
|hackable=no
 
|hackable=no
|value=$600}}
+
|value=$500}}
  
  
 
== Specifications ==
 
== Specifications ==
8 speed
+
17" capacity (from the center of the spindle to the column). 
  
Gear-headNo belts or Jacobs chuck to slip, which means there is a lot of torque.
+
VFD controlled 3 phase motorContinuously variable spindle speed from 250-??.
  
Morse #3 taper spindle
+
Morse #2 taper spindle
  
Capacity, cast iron 1 1/4"
+
Capacity, mild steel 1/2"
  
Drills to center 23"
+
Drills to center 17"
  
approximate weight 600 pounds
+
approximate weight ?? pounds
  
motor HP 1.5 (high) 1.2 (low)
+
motor HP 1  
 
 
Spindle speeds (8) 84, ...
 
  
 +
 
== Auth/Use Notes ==
 
== Auth/Use Notes ==
  
Line 36: Line 35:
 
Only use drills and accessories with correct shank taper and tang
 
Only use drills and accessories with correct shank taper and tang
  
Work piece needs secure mounting due to spindle's high torque
+
 
 
 
No through hole (table designed for coolant), must use vise
 
 
 
No quill stop, must set table or head height to prevent drilling into table
 
 
 
Don't force gear selectors, hand turn spindle as needed to align gears
 
 
 
Gears reverse spindle, must turn power switch to appropriate side for correct spindle rotation direction
 
 
 
Power switch has two speeds to each side
 
 
 
Drill shanks must be firmly seated in taper
 
 
 
To remove drill, lower spindle to expose the slot in the quill, turn the spindle by hand until the quill slot lines up with the spindle slot, insert the #3 drift into the slot with the curved edge facing up, grasp drill, tap drift with hammer
 
  
 +
 
== To-Do ==
 
== To-Do ==
  
Clean drill shanks
+
 
 
Mill pocketed vise jaw flat
 
 
 
More clamps matching table T-slots
 
 
 
Improve sketchy quill return mechanism
 
 
 
Adjustable quill stop
 
 
 
Coolant system
 
  
 
== Maintenance ==
 
== Maintenance ==
Line 79: Line 55:
 
|-
 
|-
 
|Dean Anderson
 
|Dean Anderson
|Machine Shop Host Cred
+
|  
 
|
 
|
 
|-
 
|-
 
|Everett Wilson  
 
|Everett Wilson  
 
|Dean Anderson
 
|Dean Anderson
|-
 
|Tom Judd
 
|Dean Anderson
 
|
 
|-
 
| Todd Allen
 
| Dean Anderson
 
|9/15/2015
 
|
 
|-
 
|Greg Kudlacz
 
|Todd Allen
 
|-
 
 
|Dafe Hughes
 
|Todd Allen
 
|-
 
|Connor Sullivan
 
|Tom Judge
 
|1/22/16
 
|-
 
|Abel Greenwald
 
|Michael Patton
 
 
|-
 
|-
 
|Bruce Mace
 
|Bruce Mace

Revision as of 12:15, 23 March 2017


Rockwell drill press
Owner/Loaner PS:One
Serial Number 1456658
Make/Model Rockwell 17-600 17" Drill Press
Arrival Date December 2016
Usability yes
Contact Dean Anderson
Where Cold Metals
Authorization Needed yes
Hackable no
Estimated Value $500
Host Area {{{hostarea}}}


Rockwell drill press Area: {{{hostarea}}} https://wiki.pumpingstationone.org/Rockwell_drill_press




Specifications

17" capacity (from the center of the spindle to the column).

VFD controlled 3 phase motor. Continuously variable spindle speed from 250-??.

Morse #2 taper spindle

Capacity, mild steel 1/2"

Drills to center 17"

approximate weight ?? pounds

motor HP 1


Auth/Use Notes

These notes are for reference after authorization by a person.

Only use drills and accessories with correct shank taper and tang



To-Do

Maintenance

Equipment

References

List of Currently Authorized Users

Qualified Member Trained By Date Trained
Dean Anderson
Everett Wilson Dean Anderson
Bruce Mace Chris Ruhland 3/7/17