BOSS LS-3655 150w Laser Engraver
Owner/Loaner | PS:One |
---|---|
Serial Number | SERIAL NUMBER |
Make/Model | BOSS LS-3655 150w |
Arrival Date | TBD |
Usability | yes |
Contact | CNC Area Host |
Where | CNC Shop |
Authorization Needed | yes |
Hackable | no |
Estimated Value | Est $17,000 |
Host Area | CNC |
About
The BOSS LS-3655 is an industrial CO2 laser engraver with a 36" x 55" bed, supporting over-sized material pass-thru on four sides and up to 7 inches of table depth.
Resources
The proprietary LaserWORKS software can be downloaded from BOSS here - https://www.bosslaser.com/laser-software/
Manuals for the BOSS laser and the LaserWORKS software are located here - https://www.bosslaser.com/download-manuals-guides/
BOSS test files are available here - https://www.bosslaser.com/laser-test-files
Status
This page will be filled out further as information becomes available.
The laser is currently not setup in the space, and authorizations are not being held at this time.
We are waiting on the ventilation duct to be installed in the new CNC space.
Authorizations
An authorization process has not been set up for this tool yet.
An authorization date will be scheduled sometime in January where the machine will be tested by the area host and members.