1,524
edits
Changes
From Pumping Station One
BOSS LS-3655 150w Laser Engraver (view source)
Revision as of 18:53, 26 February 2018
, 18:53, 26 February 2018no edit summary
== Status ==
== Status ==
* (2018/02/26) Working. Z-Axis motor having some issues? 2-25-2018
* (2017/05/20) 150W Tube & Power Supply installed. Alignment & focusing pending.
* (2017/05/20) 150W Tube & Power Supply installed. Alignment & focusing pending.
* (2017/06/12) The laser has been aligned and focused. 2" Laser lens focal depth set to 5.1mm.
* (2017/06/12) The laser has been aligned and focused. 2" Laser lens focal depth set to 5.1mm.
You need a few things to optimize and expedite your experience:
You need a few things to optimize and expedite your experience:
1. Know what you're doing as best as you can - come pre-trained on your own time to make the authorization go smoother and faster.
* 1. Know what you're doing as best as you can - come pre-trained on your own time to make the authorization go smoother and faster.
2. Have a PS1 username set up before starting the authorization http://members.pumpingstationone.org
* 2. Have a PS1 username set up before starting the authorization http://members.pumpingstationone.org
3. Have some familiarity with the kinds of files you would bring to the Boss to cut.
* 3. Have some familiarity with the kinds of files you would bring to the Boss to cut.
To that end; you could download and become familiar a bit with RDWorks, the software you will use to drive the Boss. Links are on this page.
To that end; you could download and become familiar a bit with RDWorks, the software you will use to drive the Boss. Links are on this page.
