133
edits
Changes
Jump to navigation
Jump to search
Line 18:
Line 18: + + Line 57:
Line 59: − + Line 64:
Line 66: − + + − − To set up a PS1 username (this is NOT the email address you use, it's a different thing, it's entirely special to PS1) go to http://members.pumpingstationone.org, and click "Activate" ... if you don't already have a PS1 username.
BOSS LS-3655 150w Laser Engraver (view source)
Revision as of 21:05, 23 May 2021
, 21:05, 23 May 2021→Volunteer authorizers:
The BOSS LS-3655 is an industrial CO2 laser engraver with a 35.4" x 55.1" bed, supporting over-sized material pass-thru on four sides and up to 7 inches of table depth. Originally shipped with 100W tube, but that has been replaced with 150W tube in May, 2017.
The BOSS LS-3655 is an industrial CO2 laser engraver with a 35.4" x 55.1" bed, supporting over-sized material pass-thru on four sides and up to 7 inches of table depth. Originally shipped with 100W tube, but that has been replaced with 150W tube in May, 2017.
Machine dimensions are 82" x 57" x 45".
== Status ==
== Status ==
====Volunteer authorizers:====
====Volunteer authorizers:====
*Jeff Zelnio
*Jeff Zelnio
*Collin Patterson
*Andrew Camardella
=== Preparing yourself to become authorized ===
=== Preparing yourself to become authorized ===
* 1. Know what you're doing as best as you can - come pre-trained on your own time to make the authorization go smoother and faster.
* 1. Know what you're doing as best as you can - come pre-trained on your own time to make the authorization go smoother and faster.
* 2. Have a PS1 username set up before starting the authorization http://members.pumpingstationone.org (from 2018 onwards, you will create a username as part of the signup process or migration to the Wild Apricot-managed member management system. A username is not an email address.
* 2. Have a PS1 username set up before starting the authorization http://membership.pumpingstationone.org
* 3. Have some familiarity with the kinds of files you would bring to the Boss to cut.
* 3. Have some familiarity with the kinds of files you would bring to the Boss to cut.
To that end; you could download and become familiar a bit with RDWorks, the software you will use to drive the Boss. Links are on this page.
To that end; you could download and become familiar a bit with RDWorks, the software you will use to drive the Boss. Links are on this page.
You can read a bit of the manual, which is also linked on this page, or watch some YouTube videos.
You can read a bit of the manual, which is also linked on this page, or watch some YouTube videos.
Bring files in from Adobe Illustrator in Illustrator format, with lines set to have SOME sort of stroke, I'd recommend 1 point stroke, and some simple color applied to the stroke for each "layer" you want to have in RDWorks. You will want to have one color/layer assigned for each type or strength of cut/engrave you'll be doing in that job. For instance, you might want a deep engraving, a shallow engraving, a cut that goes all the way through the material and maybe a cut that just barely touches the top surface (called a 'kiss cut) and that would mean you would need four distinct colors of stroke used in your file. You should investigate the usefullness of SVG, DXF and DWG files as well, but Illustrator files will give you the best first experiences.
Bring files in from Adobe Illustrator in Illustrator format, with lines set to have SOME sort of stroke, I'd recommend 1 point stroke, and some simple color applied to the stroke for each "layer" you want to have in RDWorks. You will want to have one color/layer assigned for each type or strength of cut/engrave you'll be doing in that job. For instance, you might want a deep engraving, a shallow engraving, a cut that goes all the way through the material and maybe a cut that just barely touches the top surface (called a 'kiss cut) and that would mean you would need four distinct colors of stroke used in your file. You should investigate the usefullness of SVG, DXF and DWG files as well, but Illustrator files will give you the best first experiences.