Beverly Shear
From Pumping Station One
 | |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | {{{serial}}} |
| Make/Model | Beverly Shear Model B-2 |
| Arrival Date | January 2015 |
| Usability | yes |
| Contact | Dean Anderson |
| Where | Cold Metals |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | ~500 |
| Host Area | Cold Metals |
Description
The Beverly shear is for cutting sheet metal up to 10 gauge in mild steel and 14 gauge in stainless steel.
To Do
Adjust blade. Make a sign with allowable thicknesses.
Blade Adjustment
Beverly suggests starting with a clearance between the blades of 1/4 the thickness of the material and decrease this until you get a cut edge with no burr. Use a feeler gauge to measure the clearance. Soft material-small clearance, harder material-large clearance, with a factor thrown in for material thickness.
Resources
List of Currently Authorized Users
| Qualified Member | Trained By | Date Trained |
|---|---|---|
| Dean Anderson | Machine Shop Host Cred | |
| Justin T. Conroy | Everett Wilson | 2015/06/10 |
| Doorman Dave | Everett Wilson | 2015/06/10 |
| Greg "nerobro" Teiber | Everett Wilson | 2015/06/10 |
| Peter Letscher | Todd Allen | 10/28/15 |
| Aaron Carlock | Todd Allen | 11/18/15 |
