Rockwell drill press
From Pumping Station One
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Owner/Loaner | PS:One |
---|---|
Serial Number | 1456658 |
Make/Model | Rockwell 17-600 17" Drill Press |
Arrival Date | December 2016 |
Usability | yes |
Contact | Dean Anderson |
Where | Cold Metals |
Authorization Needed | yes |
Hackable | no |
Estimated Value | $500 |
Host Area | {{{hostarea}}} |
Specifications
17" capacity (from the center of the spindle to the column).
VFD controlled 3 phase motor. Continuously variable spindle speed from 250-??.
Morse #2 taper spindle
Capacity, mild steel 1/2"
Drills to center 17"
approximate weight ?? pounds
motor HP 1
Auth/Use Notes
These notes are for reference after authorization by a person.
Only use drills and accessories with correct shank taper and tang
Be sure the e-stop (big red button) is in the out position by twisting the button counterclockwise. This must be done before turning on the power, otherwise the spindle will not operate.
Authorizations from the old DoAll drill press carry over to this machine.
To-Do
Maintenance
Equipment
References
List of Currently Authorized Users
Qualified Member | Trained By | Date Trained |
---|---|---|
Dean Anderson | ||
Everett Wilson | Dean Anderson | |
Bruce Mace | Chris Ruhland | 3/7/17 |