Talk:Epilog 30w Mini 24 Laser Engraver

From Pumping Station One

List of certified users

Since getting certified entailed having an account set up on the laser cutter computer, that's where/how the list of certified users used to be kept. In a way, that means the list for this tool is the *most* complete. It would probably be possible to pull that list off the computer and put it here. KathyW 12:34, 24 May 2013 (UTC)

The true and authoritative list is now driven from the members.pumpingstationone.org server. After a person is authorized, the authorizer should log on to members. and add them to the laser-authorized group. There is a way you can do it from the command line of an ssh client in the space, too, instructions for that are on the wiki. --Rdoeksen (talk) 15:07, 3 July 2015 (CDT)

Inkscape —.svg and .eps

Is anyone aware of whether the Epilog driver can natively handle straight up .svg (and which format) or .eps? Inkscape can handle these — it would be helpful to people with no Illustrator experience to be able to skip using software they're not familiar with. Jason (talk) 12:22, 25 February 2014 (CST)

inskcape .svg warning

Inskscape can print to the lasercutter directly, but "hariline/vector cuts" do not work. It will raster the entire image. The only way I have seen it work is to set line thinkness to .001 inches, and save as a pdf. Then print the pdf from adobe acrobat.

--Hef (talk) 13:37, 25 February 2014 (CST)

That may be an issue with using the driver properly. I think you can set what will cut/raster in the advance settings, but I also don't care if there's already a mostly workable workflow for dealing with .eps and .svg. Jason (talk) 13:46, 25 February 2014 (CST)


Dead link

During several automated bot runs the following external link was found to be unavailable. Please check if the link is in fact down and fix or remove it in that case!

The web page has been saved by the Internet Archive. Please consider linking to an appropriate archived version: [1].--Wikibot (talk) 07:22, 18 July 2014 (UTC)

Retrieved from "https://ps1.mywikis.wiki/w/index.php?title=Talk:Epilog_30w_Mini_24_Laser_Engraver&oldid=24480"