Talk:Lulzbot Taz3

As of 6/5/2015 nozzle unclogged, tested with ABS. --Rdoeksen (talk) 19:22, 3 June 2015 (CDT)

As of 6/1/2015 clogged with PLA through the length of the hot end and nozzle. Needs to be disassembled, burned out, nozzle cleaned. Probably needs replacement nozzle. Needs replacement parts for the hot end (wood discs, maybe aluminum disk) --Rdoeksen (talk) 18:52, 1 June 2015 (CDT)

As of 5/20/2015 not clogged, running normally.

Seems to be extruding fine as of 4/30/2015. [Extruder nozzle clogged. Needs unclogging or nozzle replacement. (As of 4/28/2015, clogged)]

SD card reader DOES NOT WORK. Works only in tethered mode, driven by USB from a computer.

Spool hanging bolt on enclosure sure could use an upgrade. It is long enough but there is no positive catch to keep the spool in place.

Could someone please post URLs and part numbers for commonly needed replacement parts and supplies. --Rdoeksen (talk) 18:52, 1 June 2015 (CDT)