Beast Notcher
Jump to navigation
Jump to search
 | |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | N/A |
| Make/Model | JD2 Beast Notcher |
| Arrival Date | 4/17/2017 |
| Usability | yes |
| Contact | Cold Metals Area Host |
| Where | Cold Metals |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $500 |
| Host Area | Cold Metals |
How To Get Authorized
Users are required to provide their own hole saws. Milwaukee bi-metal hole saws are the recommended brand. https://www.homedepot.com/p/Milwaukee-2-in-Hole-Dozer-Bi-Metal-Hole-Saw-49-56-9624/ Contact the Hot Metals Area Host for information about how to get authorized.
Notes
- If you are struggling to remove your hole saw from the shaft, place the chuck section of the shaft in a vice to provide more leverage, DO NOT grip the outer bearing surface of the shaft with any tools or the vice.
Authorized Users
- Bryan Gleason
- Ryan Pierce
- Ray Doeksen
References
- This is the official demonstration video of the Beast notcher by JD Squared, Inc. Watch Bob Hughes discuss how to load and operate our heavy duty Beast. https://youtu.be/5_dPgYjMdmE