Lathe - Wood. Robust Sweet 16
From Pumping Station One
 | |
| Owner/Loaner | PS1 |
|---|---|
| Serial Number | NAN |
| Make/Model | Robust Sweet 16 S16-SD-WC |
| Arrival Date | 1/17/2020 |
| Usability | yes |
| Contact | Wood Shop Area Host |
| Where | Wood Shop |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | 6000 |
| Host Area | Wood Shop |
|
Authorization Course Info |
 Sweet 16 Wood Lathe Schedule Frequency: Once monthly, by appointment only with authorizer Discord Channel: #woodshop-general Prerequisites: Woodshop Basic Authorization Step 1: Review the Wood Lathe Authorization Checklist Step 2: Familiarize yourself with the Lathe - Wood. Robust Sweet 16 tool page Step 3: Email Donzell to schedule in person auth Step 4: Complete in person course Required Materials: Required: safety goggles, no loose clothing. Optional: mask, ear protection Tools covered:
 Edit this auth Copy and paste this into the tool's wiki page after the Template:EquipmentPage template. {{:Authorizations/Sweet 16 Wood Lathe}} |
Description
New Lathe purchased in 2019 for installation in January 2020 delivery and installation. As it is significantly different from the old lathe, all previously trained users will need to be reauthorized.
Status
Here's a video link of the Robust Sweet 16 lathe https://www.youtube.com/watch?time_continue=3&v=sX_iqj1V1Ek
Resources
Wood Lathe Authorization Checklist
Intro to Woodturning by Brian Clifford
and the manual....[1]
Personal Protective Equipment
- Face shield (not just safety glasses) must be worn.
- Long and loose hair must be contained.
- Do not wear gloves or loose clothing.
- Remove watches, rings, and other jewelry.
- Roll up or don't wear long sleeves.
- Dust protection may be required.
Pre-Operational Safety Checks
- Locate and ensure you are familiar with all machine operations and controls.
- Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or faulty.
- Workpiece must be securely fastened to face plate, chuck or between centers.
- Rotate the workpiece by hand to check clearance between tool rest and bed.
- Ensure the cutting tools are sharp and in good condition.
- Start the dust extraction unit before using the machine.
- Make sure all clamping handles are tight.
Operational Safety Checks
- Adjust speed to suit the diameter of the work and turning operation (IMPORTANT - *never* adjust speed while the lathe is off!)
- Before making adjustments (apart from speed), switch off and bring the machine to a complete standstill.
- Keep the tool rest adjusted close to the work and at the correct height.
- Stop the lathe and remove all tool rests before sanding.
Ending Operations and Cleaning Up
- Switch off the machine when work completed.
- Return all chisels and other tools to racks.
- Leave the machine in a safe, clean and tidy state.
- Sweep or vacuum any wood debris/dust/shavings.
Potential Hazards and Injuries
- Please watch this short safety video on YouTube [2]
- Eye injuries from flying debris or defective timber. Wear appropriate eye protection.
- Hair/clothing getting caught in moving machine parts. Remove jewelry, loose clothes, keep sleeves short, roll up sleeves, no gloves, secure long hair
- Airborne dust. Wear a respirator or dust mask appropriate for the material you are using.
- Smacked or cut/impaled by a gouge. If you don't maintain a good stance and a good grip, a tool can go flying.
- Wood shrapnel. Occasionally, the workpiece can explode. A face shield, an apron, and working slowly with sharp tools can help avoid this hazard.
Do
- Rough cut the workpiece as close as possible to the finished shape before installing it.
- Check your workpiece for flaws, cracks, knots etc. and test glue joints before mounting the workpiece on machine.
- Use the lowest speed when starting a new workpiece.
Don't
- Drive the workpiece into the drive center while the drive center is in the headstock.
- Touch your project by hand while the lathe is running
DO
- Set the drive center into the workpiece with a soft mallet prior to installing it on the headstock.
Documentation
https://wiki.pumpingstationone.org/Wood_Lathe_Authorization_Checklist
Short, basic safety video: https://www.youtube.com/watch?v=GV0dmf2mBMc
