Vinyl Cutter

From Pumping Station: One Wiki
Revision as of 11:40, 27 March 2015 by Ryanarchy (talk | contribs) (Authorization Edit)
Jump to: navigation, search


Vinyl Cutter
Vinylcutter.jpg
Owner/Loaner PS:One
Make/Model Jaguar II
Arrival Date 2012
Usability yes
Contact Donald Jacobson
Where Upstairs
Authorization Needed yes
Hackable no
Estimated Value $2300
Host Area {{{hostarea}}}


Vinyl Cutter Area: {{{hostarea}}} https://wiki.pumpingstationone.org/Vinyl_Cutter




Tips on how to use (After Certified)

User Guide PDF

Loading the Media.

  • Raise the lever on the upper back right of the machine
  • Slide in the media. It helps to have a rectangular piece so the machine can recognize the size. Center it over some of the grooved rollers so they are as close to the edges as possible.
  • Slide the pinch rollers from behind over the grooved roller you chose.
  • Lower roller with the lever.
  • Read the display and push the arrow button for the type of media you are loading. For a single sheet (not a roll), for example you would press the right arrow (see screen shot below)

Importing

The Software used is CoCut Standard 2015. We not longer use the software that came with the cutter.

The software does not import svgs, but does import Adobe Illustrator files. Open your SVG in Illustrator and resave it as an .ai file. Then import your file into CoCut Pro.

Notes:

  • Make sure to check any files you download from the internet for hidden artifacts
  • Make sure all your borders/strokes are set to 0px or you will get 3 cuts for the border (inner stroke, outer stroke and object edge)

Cutting

When your graphic is ready to cut, click the File...Cut/Plot menus. This should bring up a couple of new windows. One is the Production Manager. This may show some older, incomplete jobs from failed attempts. Delete those old jobs.

The other window shows your setup. Note the orientation of your job. You may want to rotate it to fit the orientation of your vinyl in the plotter. Use the turned stick man button at the bottom to do this.

Make sure you set the size of your vinyl.

Note:

The output settings for speed and pressure do not work on our machine you must change these settings on the machine itself.

  • Take the cutter offline (hit on/off line button)
  • Hit the speed or pressure button
  • Use arrow keys to change value
  • Hit enter
  • Put the cutter online by hitting the on/off line button a second time

Blades

There are 3 types of blade for the cutter:

These blades will be arriving shortly.

Purchasing Materials

New Materials can be purchased locally through Rayco near Peterson and Pulaski, the plotter size is 24 inches.

  • Economy/Intermediary stock is for the majority of projects and has an expected life of 3 years
  • High performance stock is intended for cars and boats and has an expected life of 7 years.

Recommended Certifiers

Certified Users

Qualified Member Trained By
Donald Jacobson Donald Jacobson
Bart dring Donald Jacobson
Ray Doeksen Elizabeth Koprucki
David Fell Elizabeth Koprucki
Derek Bever Elizabeth Koprucki
Roger Moore Elizabeth Koprucki
Tom Forajter Elizabeth Koprucki
Arturo Duarte Elizabeth Koprucki
Tyler Natoli Elizabeth Koprucki
Sloan Lavery Elizabeth Koprucki
Tyler Hsu Elizabeth Koprucki
Casey Olson Justin and Derek!
Jeff McBride Elizabeth Koprucki
Clarence Risher Elizabeth Koprucki
Will Garza Elizabeth Koprucki
Nick Halderman Elizabeth Koprucki
Aaron Mintz Elizabeth Koprucki
Matt Makris Elizabeth Koprucki
Matt Meshulam Elizabeth Koprucki
Mark Cabael Elizabeth Koprucki
Tom Judge Elizabeth Koprucki
Todd Allen Elizabeth Koprucki
Lucas Goossen Tom Judge
Sonia Yaco Elizabeth Koprucki
Alex Trimm Elizabeth Koprucki
Davis Mazariegos Elizabeth Koprucki
Knute Martell Elizabeth Koprucki
Ryan Neuman Elizabeth Koprucki