Lulzbot Taz3
Owner/Loaner | PS:One |
---|---|
Serial Number | KT-PR0013-5509 |
Make/Model | Aleph Objects Taz3 |
Arrival Date | January 2014 |
Usability | yes |
Contact | Elizabeth |
Where | CNC 2nd Floor |
Authorization Needed | yes |
Hackable | no |
Estimated Value | $2395 |
Host Area | {{{hostarea}}} |
Operation
Do not leave the printer unattended while printing Also, don't forget to turn the printer off when you are no longer using it.
Windows Drivers
Windows users will need to install drivers.
Usable Print Area
298mm x 275mm x 250mm (11.7in x 10.8in x 9.8in)
Host Software
Users of Linux, Windows, OSX will need to install the following software:
- Pronterface - or Repeteir-Host for manual operation of the printer as well as for starting print jobs
- Slic3r - for creating gcode (print jobs) from 3D models
- Additionally, Lulzbot provides a slic3r config file for the Taz3
Suggested Settings
Both of these files have appropriate settings for the 'printer settings' and 'filament settings' tabs. To use them, go to File > Load Config in Slic3r and select the downloaded file. You must then go to each tab and hit the 'save' icon next to the settings selection dropdown box, or else Slic3r will forget the settings when you close it.
Print Settings Without Support - Fast
File:Taz3 print settings NO SUPPORT.ini
This file is for the 'print settings' tab of Slic3r. This is a 'fast' profile, geared towards finishing prints relatively quickly. It still provides excellent surface quality. This profile does not include support, so for large overhangs you'll need the next configuration file.
Print Settings With Support - Fast
File:Taz3 print settings SUPPORT.ini
This file is for 'print settings' tab of Slic3r. This is a 'fast' profile, geared towards finishing prints relatively quickly. It still provides excellent surface quality. This profile includes support, appropriate for large overhangs.
Other Resources
The manual is available online. A printed form of it can be found near the printer. The manual explains how to operate the printer.
Filament
Find Something to Print
Thingiverse is a great place to find printable 3D models that other people have designed, and to publish your own.
Designing 3D Models
Page in progress to describe 3D modeling.
List of Currently Certified Users
qualified member | trained by |
---|---|
Derek Bever | Hours of shouting at 3D printers |
Elizabeth Koprucki | Derek Bever |
Andrew Kos | Elizabeth Koprucki |
Ray Doeksen | Elizabeth Koprucki |
Everett Wilson | Derek Bever |
David Earley | Derek Bever |
Lyn Cole | Derek Bever |
Greg Teiber | Derek Bever |
Nick Castillo | Derek Bever |
Tom Forajter | Elizabeth Koprucki |
David Ditzler | Elizabeth Koprucki |
David Fell | Elizabeth Koprucki |
Rob Riggs (Colorado Rob) | Elizabeth |
Arturo Duarte | Elizabeth Koprucki |
Justin T. Conroy | Derek Bever |
James Porter | Elizabeth Koprucki |
Ryan Kelly | Elizabeth Koprucki |
Janet Dornhoff | Elizabeth Koprucki |
Genevieve Aphrodite | Justin Conroy |
Sloan Lavery | Elizabeth Koprucki |
Adam Glick | Ray Doeksen |
Tyler Natoli | Elizabeth Koprucki |
Chris Marchwick | Elizabeth Koprucki |
Marty Dubin | Elizabeth Koprucki |
Tom Judge | Justin Conroy |
Brian Dunn | Derek Bever |
Tim Lofgren | Derek Bever |
Jeff McBride | Elizabeth Koprucki |
Thomas Wright | Justin Conroy |
David Siegfried | Derek Bever |