Difference between revisions of "Category:CNC"
Line 31: | Line 31: | ||
* [[Shopbot PRS CNC router]] | * [[Shopbot PRS CNC router]] | ||
* [[Cubify Sense 3d Scanner]] | * [[Cubify Sense 3d Scanner]] | ||
+ | * [[3dSystems CubePro|3dSystems CubeProTrio 3D printer]] | ||
== Supplies == | == Supplies == | ||
− | Supplies | + | Supplies are generally not provided. There are some PS1-owned bits in the drawer for the ShopBot, there is often some common-use filament available for the TAZ3, AO-100 or Replicator 3D printers, but you may also used your own if you want to be confident that you'll have enough high-quality filament for your project. Filament can be purchased at MicroCenter and other retailers for about $20 per spool. Filament can be purchased for the Cube printer for about $100 per cartridge. |
+ | |||
+ | All machines, including the vinyl cutter and large format printers, should have information about their consumables listed on their respective wiki page. | ||
+ | |||
+ | There is a donation box next to the Cube printer for filament; suggested donation for Cube filament is 30 cents per gram. | ||
+ | |||
== Certifications == | == Certifications == |
Revision as of 19:26, 19 December 2015
CNC | ||
Hosted Since: | ||
---|---|---|
Location: | All over | |
Equipment: | Category:CNC | |
Area Host Contact Details | ||
Name: | Andrew Camardella | |
Phone: | ||
Email: | camardea at gmail.com | |
Other Contact: | ||
Office Hours: | Will be updated soon! | |
Certifications: |
Computer Numeric Control: computerized tools for manufacturing and crafting.
Rules
Safety
Tools Available
- MakerBot Replicator
- LulzBot
- Epilog 30w Mini 24
- Vinyl Cutter
- HP DesignJet 755CM (Large Format)
- Lulzbot Taz3
- Shapeoko Router
- ShapeOko2 CNC Router
- Shopbot PRS CNC router
- Cubify Sense 3d Scanner
- 3dSystems CubeProTrio 3D printer
Supplies
Supplies are generally not provided. There are some PS1-owned bits in the drawer for the ShopBot, there is often some common-use filament available for the TAZ3, AO-100 or Replicator 3D printers, but you may also used your own if you want to be confident that you'll have enough high-quality filament for your project. Filament can be purchased at MicroCenter and other retailers for about $20 per spool. Filament can be purchased for the Cube printer for about $100 per cartridge.
All machines, including the vinyl cutter and large format printers, should have information about their consumables listed on their respective wiki page.
There is a donation box next to the Cube printer for filament; suggested donation for Cube filament is 30 cents per gram.
Certifications
Pages in category "CNC"
The following 25 pages are in this category, out of 25 total.