Search results

Volunteer_Positions#Cold_Metals_Authorizers page for a current list of Cold Metals Tier 1 authorization volenteers We want as many people available to do Cold Metals

Johnson Bandsaw Area: Cold Metals https://ps1.mywikis.wiki/wiki/Johnson_Bandsaw {{#subobject: |Has value=700 }} A VFD has been fitted, this allows the

Rockwell drill press Area: Cold Metals https://ps1.mywikis.wiki/wiki/Rockwell_drill_press {{#subobject: |Has value=$500 }} 17" capacity (from the center

DoAll Bandsaw Area: Cold Metals https://ps1.mywikis.wiki/wiki/DoAll_Bandsaw {{#subobject: |Has value=900 }} This tool requires certification for use. The

functions of the DRO. Authorization on this tool requires previous Tier 1 Cold Metals Authorization. Seek out the volunteer authorizers on the Groups or

Usability yes Contact Host Cold Metals Where {{{where}}} Authorization Needed yes Hackable no Estimated Value $400 Host Area Cold Metals

Clausing Lathe Anna Yu and Ed Bennett Area: Cold Metals https://ps1.mywikis.wiki/wiki/Clausing_Lathe {{#subobject: |Has value=yes }} Cover the machine

48in sheet metal brake Area: Cold Metals https://ps1.mywikis.wiki/wiki/48in_sheet_metal_brake {{#subobject: |Has value=$750.00 }} For straight line bends

The Board of Directors has designated the following official Volunteer Positions. See Area Hosts and Volunteer Positions Policy for more information. See

Works" version Arrival Date 2014 Usability yes Contact CNC Area Host Where Cold Metals Authorization Needed yes Hackable Consult CNC Area Host Estimated

pressure with which the trigger is pulled. Bridgeport Knee Power Feed Area: Cold Metals https://ps1.mywikis.wiki/wiki/Bridgeport_Knee_Power_Feed {{#subobject:

value=$600 }} What is it? - Boice Crane Drill Press Who is sponsoring? - Cold Metals Host - Jim Brink Date published to the mailing list and RT- 06/11/2018

Grizzly Mini Metal Lathe (7in x 12in) PS1 Area: Cold Metals https://ps1.mywikis.wiki/wiki/Grizzly_Mini_Metal_Lathe_(7in_x_12in) {{#subobject: |Has value=$525

The following are prerequisites for authorization on the LeBlond 1 Tier 1 Cold Metals authorization 2 Canvas LeBlond course Base skills for authorization:

LapMaster Area: Cold Metals https://ps1.mywikis.wiki/wiki/LapMaster {{#subobject: |Has value=$3000 }} Lapping video https://www.youtube.com/watch?v=fnoVV-RWIWY

Bend protractors Area: Cold Metals https://ps1.mywikis.wiki/wiki/Bend_protractors {{#subobject: |Has value=$400 }} Tom Judge

Beast Notcher Area: Cold Metals https://ps1.mywikis.wiki/wiki/Beast_Notcher {{#subobject: |Has value=$500 }} Users are required to provide their own hole

15 inch State Disk Sander PS1 Area: Cold Metals https://ps1.mywikis.wiki/wiki/15_inch_State_Disk_Sander {{#subobject: |Has value=$500 }} This equipment

1" x 90" Belt Sander Area: Cold Metals https://ps1.mywikis.wiki/wiki/1%22_x_90%22_Belt_Sander {{#subobject: |Has value=$300 }} Belt size 1" x 90" Power

Arrival Date Dec 2013 Usability yes Contact Area Host (Dean Anderson) Where Cold Metals Authorization Needed yes Hackable no Estimated Value $800 Host Area

A set of ER25 tooling. ER25 Tooling McTavish McArdle Area: Cold Metals https://ps1.mywikis.wiki/wiki/ER25_Tooling {{#subobject: |Has value=$200 }} This

down, then across. The beige lockers between the general work area and the Cold Metals area

Most of the equipment at PS1 requires authorization before you can use it. Look at the equipment label on the thing, to see if it requires authorization

We have three of these. One lives by mill in Cold Metals, and two in General area/small metals area / cold metals intersection. They've been retrofitted

members would like to see in the cold metals area. Parts washer (solvent type) Ultrasonic parts washer Slip roller Stomp shear Cold cut saw dimple dies, knock

the cold metals area, if there is not space available directly in the cold metals area the vertical bandsaw would be located as close to the cold metals

Refrigerator Area: Kitchen https://ps1.mywikis.wiki/wiki/Refrigerator {{#subobject: |Has value=$500 }} Do not leave food or beverages in the refrigerator

Pro32 Bender Area: Cold Metals https://ps1.mywikis.wiki/wiki/Pro32_Bender {{#subobject: |Has value=$800 }} These dies are for use with structual tubing

Ridgid WD4070 Area: Cold Metals https://ps1.mywikis.wiki/wiki/Ridgid_WD4070 {{#subobject: |Has value=$87 }} This item is VAC, WD4070 4 GALLON 31653 Lightweight

Drill Doctor 750X PS1 Area: Cold Metals https://ps1.mywikis.wiki/wiki/Drill_Doctor_750X {{#subobject: |Has value=$140 }} Manual -> https://wiki.pumpingstationone

Beverly Shear Area: Cold Metals https://ps1.mywikis.wiki/wiki/Beverly_Shear {{#subobject: |Has value=~500 }} The Beverly shear is for cutting sheet metal

English Wheel Area: Cold Metals https://ps1.mywikis.wiki/wiki/English_Wheel {{#subobject: |Has value=$800 }} The English wheel is a hand operated machine

Authorization Contact Cold Metals Basic Authorization: Tier 1 Cold Metals Authorizers Cold Metals Clausing Metal Lathe Cold Metals Authorizers Cold Metals LeBlond

Baldor 510 Tool Grinder Area: Cold Metals https://ps1.mywikis.wiki/wiki/Baldor_510_Tool_Grinder {{#subobject: |Has value=$125 }} This is a tool grinder;

Conduits from this panel were sharpie labeled with letters for this mapping. Cold Metal shop, In the safe in the lounge. The top big breaker is the service

Make/Model Sherline Model 5000 Arrival Date 2010 Usability yes Contact Host Cold Metals Where Removed Authorization Needed no Hackable no Estimated Value

worktables in General, Wood and Hot metals back door next to small metals wall of cold metals shopbot West wall of hot metals lasers for air assist The compressor

Hulk Tube Roller Area: Cold Metals https://ps1.mywikis.wiki/wiki/Hulk_Tube_Roller {{#subobject: |Has value=$1800 }} The SWAG Tubing Roller “Hulk” is used

table. it is usable but blade stability is poor. NEW guide made by helpful cold metals. . 8/2019. Drive belt and pulley came off drive shaft. Eric and Gary

Bridgeport CNC Mill Area: Cold Metals https://ps1.mywikis.wiki/wiki/Bridgeport_CNC_Mill {{#subobject: |Has value=~$2000 }} What is it? - Bridgeport CNC

Reimbursement data needed to refund James Kitchen 6000 2,395.94 Active 11/15/23 None Cold Metals 5400 1,467.13 Active 11/15/23 None Woodshop 15,350 11,681.21 Active

of the new space. Cold metals and jewelry expand into the current woodshop. Plan 3: Woodworking expands into the cold metals area. Cold and hot metals moves

respectively), and two pairs of clamps. V-Block Set (4 piece) McTavish McArdle Area: Cold Metals https://ps1.mywikis.wiki/wiki/V-Block_Set_(4_piece) {{#subobject:

general questions to [email protected] The current kegerator holds the cold plate for the carbonator and leaves room for two 5-gallon kegs. It is set

metals: Hot Metals is where you can weld, forge, roughly cut, etc. metals. Cold Metals is where you can do precise metalworking with large equipment Small

classification) Arts & Textiles Area (Area host budget) CNC Area (Area host budget) Cold Metals Area (Area host budget) Electronics Area (Area host budget) General

can't I achieve good definition on the finished part? Material too cold Mold too cold. Insufficient vacuum. Insufficient vacuum holes in the mold Why Is

circuit. This circuit feeds the four unit heaters in the north shop (General, Cold Metals, and Small Metals). The unit heaters are set up so that they will

Bring games or play ours! Wednesday, Thursday, and Saturday, Ed will be doing Cold Metals authorization. Check the list for timing. Mandatory for Bridgeport

regularly scheduled authorizations happening the on manual Bridgeport, but Cold Metals Volunteer Authorizers can field a request. I've seen folks doing authorizations

Plasterer Mailing List Announcement: 2020-7-18 Cancelled: 2020-7-31 AC in cold metals was fixed by the board, exercising power to repair infrastructure

Everett Wilson 2014-03-11: First draft of the vote. 2014-03-11: Sent to the mailing list, with a proposed vote date of the 18th. 2014-03-18: Vote passed

Hydraulic Lift Table Area: Cold Metals https://ps1.mywikis.wiki/wiki/Hydraulic_Lift_Table {{#subobject: |Has value=$500 }} Be extremely careful when moving

Pramac Pallet Jack Area: Cold Metals https://ps1.mywikis.wiki/wiki/Pramac_Pallet_Jack {{#subobject: |Has value=$500 }} The jack is fairly narrow. Be sure

DiArco sheet metal notcher Area: Cold Metals https://ps1.mywikis.wiki/wiki/DiArco_sheet_metal_notcher {{#subobject: |Has value=$500 }} blades may need

Milwaukee 6850 Metal Shear Area: Cold Metals https://ps1.mywikis.wiki/wiki/Milwaukee_6850_Metal_Shear {{#subobject: |Has value=$? }} 18 Gauge Max User

Mailing List Announcement: ??? Officially Proposed: ??? Voted on: ??? The cold metals budgets for previous years were $6000 (2015) and $5600 (2016). This

Doorbell Area: Wood Shop And cold https://ps1.mywikis.wiki/wiki/Doorbell {{#subobject: |Has value=$198.00 }} Doorbell system was installed in august 2020

Back to 2015 Budget Vote Prepared by: Dean Anderson Total Budget Required: $ 6,000.00

Shear Brake and Roll Jet Area: Cold Metals https://ps1.mywikis.wiki/wiki/Shear_Brake_and_Roll_Jet {{#subobject: |Has value=$750 }} Used to cut, bend and

000, minus funds used from the Temporary 2019 Area Host Budget, to cover Cold Metals Area expenditures for the fiscal year of 2019. The board assigns this

$8700, minus funds used from the Temporary 2018 Area Host Budget, to cover Cold Metals Area expenditures for the fiscal year of 2018. The board assigns this

Oliver Instrument Die Filer Area: Cold Metals https://ps1.mywikis.wiki/wiki/Oliver_Instrument_Die_Filer {{#subobject: |Has value=$500 }} r== Notes == Most

Powermatic drill press Area: Cold Metals https://ps1.mywikis.wiki/wiki/Powermatic_drill_press {{#subobject: |Has value=$1700 }} Swing (In.) 18 Spindle

Eclipse Scroll Saw Area: Cold Metals https://ps1.mywikis.wiki/wiki/Eclipse_Scroll_Saw {{#subobject: |Has value=$999 }} The Eclipse Scroll Saw frame utilizes

given thread is hanging on the wall in Cold Metals. Adapter and Master Column Height Adjust Collar Drill Chart in Cold Metals Cabinet for Lassy Tapper The

Olympus Microscope Area: {{{hostarea}}} https://ps1.mywikis.wiki/wiki/Olympus_Microscope {{#subobject: |Has value= }} Donated by Jeff Lawson. Missing one

com/Inch-Temperature-Polyester-Green-Masking/dp/B00VUDSH0Q/ Have completed cold metals tier 1 authorisation Be authorised on bench and angle grinders Be

spreadsheet: PS1 Standard Tool Library Stepdown and Stepover Spreadsheet Tier 1 Cold Metals For basic cutting and drilling of stock using Johnson Saw, DoAll Bandsaw

(Sevin) Fire lane marking Hot Metals Cold Metals Electronics Lounge Arts and Crafts Move inflamables cabinet away from cold metals fire lane and against a real

Rockwell Hardness Tester Area: Cold Metals https://ps1.mywikis.wiki/wiki/Rockwell_Hardness_Tester {{#subobject: |Has value=$500 }} The Rockwell scale is

same type as what is in Cold Metals. Spend $600 to purchase a used cabinet like the one currently holding the tooling in the Cold Metals area. Here is the

Hot Metals- Cold Metals- Wood Shop- CNC- Andrew Carmandela Electronics- Arts and Crafts- Kitchen-arturo Duarte General Area- Hot Metals- Cold Metals- Wood

Paint the back stairwell railings, main doorways. Upgrade cable runs throughout the space to open cable raceways. Clean up/reorganize the safe. Crimp cables

Put equipment labels on equipment that is missing an equipment label (make a new wiki page if necessary). Move items in the Wut Zone to Limbo Throw out

shelves directly next to member storage shelves in general work area near cold metals are going to become member storage, so please remove your stuff. Pasta

This page is where your name goes if you've been authorized by an area host to perform TidySpace duties as per the Tidy_Space_Policy. Deputies are selected

column Area: Cold Metals https://ps1.mywikis.wiki/wiki/Sherline_8_inch_lathe_%2B_milling_column {{#subobject: |Has value=$1500 }} Tier 1 Cold Metals Authorization

part of the general area, and is now being occupied by cold metals. Both General area and Cold Metals are in agreement with the possible move. Plans are

your opinions on how much we should be willing to give up in exchange for cold hard cash... Will offer us a sponsorship or similar, will hear more soon

WIKI Page - https://wiki.pumpingstationone.org/Hammond_Grinder Sponsor - Cold Metals Host - Jim Brink Date Published mailing list - 2/28/18 Suggested Method

Even though PS1 is a building sized toolbox in itself, you probably want your own gear handy when you need it. Here's suggested kit, adapt for your own

extinguisher in electronics at the left of the bench 1. Loading dock. inside door in Cold Metals 2. Small Metals. 3. Kitchen, to the left of the door leading to the

Intro to PS1 and what we're about. (2 mins MAX) Tour leaves (new people) Update from the BoD about what's going Update from area hosts about what's going

Beer Group - John Alpert - Zymergy 101 - 8:50 need a temperature controlled cold chest - ($130 on craigslist) discussion class for information - 1-2 hour

List of facilities. Any space or area not designated as part of a Hosted Area is part of the General Area. General work space with outlets, part of the

Friday the 14th Wednesday (7pm), Thursday(7pm) and Saturday(11:30am) - Tier 1 Cold Metals Authorizations 3 people per session - Email Ed Saturday, March 29

Dumpster is locked and keys are in loading dock by door switch and/or in cold metals under watchful eye of the patron saint sister picture. the dumpster

This page is in flux. The Space Planning for Hosted Areas Committee will be updating it continually to share information with the membership. That means

Woodshop Info Electronics Info, Events Arts Info Hot Metals Info, Events Cold Metals Info Small Metals Info Kitchen Info But wait, there's more! (someone

and expires 12-31-2022. Authorize the board to spend up to $5,400 to cover Cold Metals expenditures for the fiscal year of 2022. The board assigns this spending

and expires 12-31-2023. Authorize the board to spend up to $5,400 to cover Cold Metals expenditures for the fiscal year of 2023. The board assigns this spending

and expires 12-31-2024. Authorize the board to spend up to $8,700 to cover Cold Metals expenditures for the fiscal year of 2024. The board assigns this spending

stand WIKI Page - https://wiki.pumpingstationone.org/Grizzly_Mill Sponsor - Cold Metals Host - Jim Brink Date Published mailing list - 2/28/18 Suggested Method

let Shawn continue buying small products relating to keeping heat in and cold out. Considering this part of general space improvements. Nobody should be

build club! Inventor of TinyG and a resin 3d printer will be presented A cold person comes in, waives introduction 300 Seconds of Fame Everett delivers

electron microscope. Hacker Fuel - Experiments using vacuum flask filtering on cold brewed coffee to produce less bitter beverages with high caffeine content

and expires 12-31-2021. Authorize the board to spend up to $4,300 to cover Cold Metals expenditures for the fiscal year of 2021. The board assigns this spending

Log into quickbooks at [1] In the upper right hand corner, there are 4 accounts: Savings, Checking, PayPal, and PEX. Select Checking select Recognized

All Member Points awarded are at the discretion of the Board of Directors, but they are generally nice people that want to see the space improved. To request

stairs is next on the list for replacement bulbs. - Jim, Cold Metals Endorsing Wally Fugiel for cold metals authoirzer TECH TEAM: - Documentation of existing

Eight foot A frame ladder is in Small metals. 4 foot a frame ladder is in cold metals A Step stool is on the Catwalk

MONEY, minus funds used from the Temporary 2020 Area Host Budget, to cover Cold Metals Area expenditures for the fiscal year of 2020. The board assigns this

100.00, minus funds used from the Temporary 2020 Area Host Budget, to cover Cold Metals Area expenditures for the fiscal year of 2020. The board assigns this

User:hef User:ekoprucki User:rdpierce Unofficial Announcement - 2014-11-18 Official Announcement - 2014-12-02 To be voted on - 2014-12-09 There are several

much space. Initially, jewelry will be co-located with cold metals and be funded through the cold metals budget. In the future, it may be spun off as its

Member leaving reason reports Check RT queue New business Ben Marshall - Cold metals authorizer Malcolm Stevens - CNC? authorizer Woodshop authorizers

Solomon as Cold Metals Area Host. For 5 / Against 0 / Abstain 0 The Board of Directors Votes to appoint Jim Brink to a WILD volunteer position in Cold Metals

nutmeg (mistake, didn't realize we had whole nutmeg) Some whole nutmeg Added cold water to jug to top up to near 1 gal 1 tsp Yeast Nutrient (Diammonium Phosphate)

with Patrick McCarthy! Come make some furbies scary. Ed is doing a Tier 1 cold metals authorization Saturday. Ed would like some presenters for NERP. If

Refund request Cold metals authorizer selection Dean asks to fill one position tonight, fill second position later Todd is chosen as cold metal volunteer

Elizabeth remains Hot Metals Tom remains Wood Triano remains Cold Metals Dean is our new cold metals host Electronics Anna remains our electronics area host

47 McTavish would like a larger role in cold metals Member points Canvas Vote to make McTavish McCardle a cold metals volunteer authorizer (Passed, 5-0)

Equipment 10 gal Gott cooler Volume: 7 gal + 1 qt cold water Start temp: Mash was 160F. Overshot. Added 1 qt cold water (included above) to drop to 152F. Start

building to the other will change. Cold metals will have to shift equipment (for which there is support in the cold metals area). The long-standing beer

reference. 2017 Administrative Budget Vote 2017 CNC Area Budget Vote 2017 Cold Metals Area Budget Vote 2017 Electronics Area Budget Vote 2017 General Area

used to be stored on top of the main circuit breakers near the back door to cold metals 3x 100A 250V Class RK5 70A 250V unclassified fuse 3x 600A 250V Class

location is in the General Work Area adjacent to the Kitchen, Small Metals and Cold Metals. Authorization will be required. Authorization format is TBD. Plans

drill bit, drill out the cold end for a distance of 0.300. Internally thread the cold end to 5/16-24. Optional: 4.76mm from the cold end, turn a groove that

Proposal Kevin Caughlin 24 4 3 33 No Meeting Notes 2014-03-18 2014-03-18 Cold Metals Tool Cabinet Reimbursement Everett Wilson 42 0 1 33 Yes Meeting Notes

possible, solution for restoring air conditioning will not be put up for a vote. Cold Metals air conditioning solution: Tanja to get outstanding contractor questions

to handle point redemptions Cold Metals Authorizer JP removed as volunteer authorizer – Lyn to put up fliers for new cold metals authorizer Tool Cage Budget

Area Amount Electronics $3,000 Woodworking $3,000 CNC $3,000 Cold Metals $3,000 Hot Metals $3,000 Arts $3,000 Kitchen $3,000 Tool Cage $3,000

2021 In mid-2020, the air conditioner serving the 3519 side of the building (Cold Metals/General) stopped cooling due to refrigerant leaks, and while it was

callouts! Dean continues to be awesome in cold metals. Ed and Anna and Ryan have been doing the tier 1 cold metal certs! Jenny and Pete are working on

area hosts! Art is shellie CNC is elizabeth Hot metals is Tom Wood is triano Cold metals is now hosted by dean Tool Cage is now hosted by Sevin General area

Batteries damaged beyond normal use will require replacement or an extra fee. CCA Cold Cranking Amps - The number of amps a battery can deliver for 30 seconds at

Space Ops Budget for 2017 Additional standardized outlets and cabling for cold metals Kitchen wall/oven installation materials Hose/cord reels for general

create additional Cold Metal Volunteer Authorizer position. Pinging Jabu and Andrew to inquire whether more Authorizers are needed in Cold Metals and Shopbot

Reimburse Dean from CNC vote. Paid. 2691 - Reimburse Everett for pin gauges from Cold Metals budget. Paid. 2683 - Reimburse Jason for laser tube return. Paid.

___________ 2 CNC ___________ 3 Kitchen ___________ 4 Hot Metals ___________ 5 Cold Metals ___________ 6 Small Metals ___________ 7 Electronics __________ Total

Authorize the board to spend up to $350 for each of the following areas: CNC Area Cold Metals Electronics Area General Area Graphics Arts and Textiles Hot Metals

https://wiki.pumpingstationone.org/Nikon_H-14A_Optical_Comparator Sponsor - Cold Metals Host - Jim Brink Date Published mailing list - Suggested Method of

Examples: hostarea=CNC or hostarea=General or hostarea=Kitchen or hostarea=Cold Metals There are 9 currently valid Hosted Area names. Could someone please

be Voted on: TBD We have an optical comparator that was purchased by the cold metals area host in October 2016, rt ticket 5546 has the receipt in it. I

themselves. Introduce the Board and Area Hosts. Thursday, May 28, 7 PM - Cold Metals Tier 1 authorization, sign up on the mailing list. July 4th weekend

through storm damage, it may be able to be written off, insurance is contacted. Cold metals may be still working, testing to be done. Member storage is being

the shelves. The new cage will be centrally located between Wood Shop and Cold Metals in space currently taken up by three large metal shelve units. It

themselves. Introduce the Board and Area Hosts. Thursday, May 28, 7 PM - Cold Metals Tier 1 authorization, sign up on the mailing list. Mohammed wants

is taking place Kitchen work day on Friday 5/4/2018 Equipment donation to Cold Metals Small Metals work this weekend A member is making lego circuit boards

match cameras in the UniFi NVR system. CNC Catwalk Dock Front Door General/Cold Metals Hot Metals - Ext Door Hot Metals - Plasma Cutter Hot Metals - Work

Paul to send social folder to Alicia Jim Brink needs help gaining access to cold metals email, or setting up a forwarder President implementing board reports

Area Hosts. Tonight - 300 Seconds of Fame! Wednesday, May 13, 7 PM Tier 1 Cold Metals authorizations. Wednesday, May 13, 7 PM Scanning Electron Microscope

vacuumed off or removed and hand-washed (or machine washed, gentle cycle, cold water) as needed. The machine's indicator lights will show the filter status

Changes Edit these only if number of columns increase. Woodshop Hot Metals Cold Metals Lasers/3dPrinters Thank you to Ron and the team. PS we’re already

casts from 3D prints Notcher and bender has been moved from hot metals to cold metals Nine people have been authorized on the Tormach so far New web store

following areas: 2D Printing Area 3D Printing Area Industrial CNC Area Laser Area Cold Metals Area Electronics Area General Area Graphics Arts and Textiles Hot

graphic arts and textiles Anna Yu - electronics New Area Hosts! CNC: Ash Jasani Cold Metals: Jim Brink Erik: If something is about to run out, let Erik know before

Authorize the board to spend up to $350 for each of the following areas: CNC Area Cold Metals Electronics Area General Area Graphics Arts and Textiles Hot Metals

the remaining cost of the machine. The English Wheel shall be stored in the Cold Metals area until the area move takes place, at which point its placement

Area January 2016 Electronics $250 Woodworking $250 CNC $250 Cold Metals $250 Hot Metals $250 Arts $250 Kitchen $250 Tool Cage $250 General $250

Lyn - Director at Purple and Willld Events Erik - General Area Host Dean - Cold Metals Area Host Make nominations for the board! Take out the garbage, clean

and Everett gets cold in the shop, Shellie needs to make Everett a sweater, Everett can't wear a sweater in the shop, the shop is cold so CLOSE the doors

Paul Ocampo -- Jim Brink is requesting another authorizer Chris Iacullo for cold metals to do authorizations on the tube bending, sheet metal equipment and

to code. Awesome Callouts Dean is in process of a major reorginization of cold metals! Jenny and Anthony and Justin went to the Mokena Maker Faire (and

Arrival Date: March 2012 Usability: no Contact: Greg "Nerobro" Teiber Where: Cold Metals Certification Needed: no Hackable: no Estimated Value: $50.00 This

callouts: Shellie for helping hang up emergency lights. Todd for putting together cold metals Tier 1 authorization. Justin, Andy, Jenny, Ray, Arturo, for painting

calendar Tormach authorization is starting early November, prereqs include Cold Metals tier 1, Bridgeport, and Shopbot There's a Fusion360 class on Wednesday

to scholarship recipients. - GenOps - Roofer is looking to fix leaks above cold metals tomorrow 1/6. Joe Mertz and Andrew Morris will communicate on slack

steve - june orientation ray - laser george shaw - organizing wrenches in cold metals skilton - blacksmithing Passed 6/6 airtable setup for various processes

contact local shops for replacement motors for the two dead heaters in the cold metals and general areas. Will discuss reorg plans this coming weekend to

appointed Simon Cygielski a (who will replace Jabu Dawdu who is stepping down) Cold Metals Volunteer Authorizer - appointed Gedi Jakovickas (who will work alongside

General & Administrative Office Of The CTO General Area CNC Electronics Cold Metals Hot Metals Kitchen Tool Cage Arts & Crafts Woodshop Votes Total Savings

report Accidental email? RT #1000 - send money for purchase of items from cold metals budget #689 - Going through spending is still in progress #902 - waiting

CNC and cold metals area hosts in formulating authorization plans that will work for PS1. If more than 4 individuals volunteer, the CNC and cold metals

do work around the space Power for Tormach Power for the stove Eliminating cold metal and woodshop extension cords The above are done The below are in progress

votes this week. GENERAL OPERATIONS: Replace coupler for the heat pump on the cold metals side. Will examine oil leak at compressor. TECH TEAM: Canvas SSO integration

gal 2 2/3 qt water at 170F Target temp: 150F (overshot to 157, reduced w/ cold water to 149.5) Start pH: 5.4 Time: 90 mins End temp: 146F End pH: 5.3 5

Jesse's Learn to Solder workshop Sun Jan. 24th on meetup at 1pm Why is it so cold and why did I come back? Enthalpy, heat energy as told by Eric Are we done

Woodshop authorization Thursday is cancelled!!! We are looking for a new cold metals volunteer authorizer! If you are interested, please apply by emailing

yes 2 points for Dean Anderson for being a generally awesome dude in the cold metals - yes 1 point to Anthony Sontag for helping out with the birthday

lightning talks. Sign up on the Wiki. Announcing applications for a second Cold Metals Volunteer Authorizer position. Closes in 1 week. Wood Shop Volunteer

Andrew Morris to test capacitors, see if compressor is pumping refrigerant Cold metals HVAC - Tanja's contact believes compressor is bad - Andrew Morris

Tucker T, Able G - 1 pt each - Dean Anderson asking for points for work in cold metals 6911 - Burton Kent - 4pt - 21 people on the laser Consuming Points

10/5/2021. Larry M to install new light at the back of the utility room. A/C in cold metals continues to leak; will try to re-level. TECH TEAM: Resolved WF2WA

design contest has ended. Will's going to seek votes on the mailing list. Cold Metals Tier 1 is happening Thursday 7:00-8:30pm. Contact Ed. Everett doesn't

Lewis - graphic arts and textiles Anna Yu - electronics Vote for Jim B. to be cold metals area host. Passed. Vote for Ash to be CNC area host. Passed. Vote

Other Members New business Transition check-in, goals Party Planner Position Cold Metal Authorizer CNC Area Host Scheduling future meetings Member issues Dispute

residence; he will install on Wednesday Got an HVAC repair person to look at the cold metals ac unit, including the rooftop compressor; he will give us two quotes

reviewing and revising the bylaws and liability Board votes to pay this bill. Cold Metals equipment: Surface grinder - member hasn't picked it up. Contact owner

hear about us - what do you make/hack) Jenny Brian Ron Dean Shae Eric Dean - cold-metal area host. Loves to work on machines - working on the bender Patrick

January 6th. We'll have no water for a couple hours that morning. Become a Cold Metals Volunteer Authorizer Volunteers are asked to perform at least 2 authorization

ON TOILET PAPER Close to getting ready for the area move (swap hot metals, cold metals, general area) Investigating electrical and air requirements Taking

$5 for electronics $1 to CNC $5 to Cold Metals Comed, Rent, Waste Management, Adobe, Pagely, Cleaners Pending: Cold Metals Equipment Starving Hackers:

Haddon space, was evicted. Dave has given it temporary permission to be in Cold Metals while it gets reduced in size. Joe asks if it is a loaned tool or

writing prompts and fun story games. Come out to try writing. Ed is proposing Cold Metals Vertical Bandsaw Vote Pumping Station: Yum is Friday at 7pm. Planning

to sort out transaction numbers. 2052: Reimburse Dean for ladder from 2014 cold metals budget. 990: 5 month old ticket from Toba, Derek to contact if this

Books Electronics - Andrew W. Kitchen - Kitchwitch Small Metals - Ally R. Cold Metals - Jim B. / Dave S. Woodshop - Sam P. Hot Metals - Ron O. 2D Printing

Check RT queue New business Transition check-in, goals Party Planner Position Cold Metal Authorizer CNC Area Host Scheduling future meetings Member issues Dispute

SWAG Offroad HD Break Arrival Date Yes Usability yes Contact Tom Judge Where Cold Metals Area Authorization Needed yes Hackable no Estimated Value $400 Host

spent hours last night fixing the sink - which had sprung leaks and flooded cold metals Could this be rolled into the 8 bit CPU computer class? Could do.

for General Area budget. Justin has this info. Closed. 3012 - Outstanding cold metal receipts: Beverly shear and CNC Bridgeport. We have info for the shear

other interior space to freeze. It's fine to leave the heat on when it's cold. Leave enough light on that you can safely make your way through all the

appointed Simon Cygielski (who will replace Jabu Dawdu who is stepping down) Cold Metals Volunteer Authorizer - appointed Gedi Jakovickas (who will work alongside

toilets got fixed, AC in woodshop got some love and care. doall bandsaw (cold metals) needs more looking into "bad voltage" means it isn't runnable at

RT Purchases: 2140: Merge to previous request by Shellie 2148: Invoice for cold metals purchase for mill chucks, collets, etc. 1852, 1853: Doorman Dave to

residence; he will install on Wednesday -Got an HVAC repair person to look at the cold metals ac unit, including the rooftop compressor; he will give us two quotes

letter. Will give to Shellie. 2202: Same subject, merge with 2003. 2197: Dean, cold metals reimbursement. Tom handling. 2203: Moved to QuickBooks. 2047: Still

Elizabeth Koprucki, CNC Area Host Dean Anderson, Cold Metals Area Host Announced: 11/11/2014 Language lockdown: 11/11/2014 Vote date: 11/18/2014 Yes: 41

$1500 * Andrew to contact ABT to see how soon we can get these b. fixing cold metals fresh air intake * Andew to get estimates c. Gary Newhouse taking

is at the discretion of the Area Host. (See Sort-Me Box by Drill Press in Cold Metals for example.) -Create "Temporary Storage" where current "Wut Zone"

our estimate. We should also talk to the lawyer about liability about this. Cold metals and general CAD drawing is coming along. TECH TEAM: Brian Desmond

approved. Needs a check. Deferred. 2511 - Reimbures Dean for drill press from Cold Metals budget. Done. 2512 - Reimburse Dean for electrical plugs. Done. 2513

Area Annual Cost Link 2018 CNC Area Budget Vote -$9,860.00 Worksheet 2018 Cold Metals Area Host Vote -$8,700.00 Worksheet 2018 Electronics Area Budget Vote

Metals area expenses. Done. 2733 - Reimburse Dean for band saw blades from Cold Metals budget. 2736 - Purchase request to repair the compressor. Andrew believes

Area Amount Electronics $4,250 Woodworking $3,850 CNC $3,000 Cold Metals $3,000 Hot Metals $3,447 Arts $3,000 Kitchen $3,000 Tool Cage $3,000

update plans of building. Dave and Andrew to discuss for organization of cold metals with Jim. Desire from Ash for improved venting. TECH TEAM: David,

New bulbs installed in woodshop; will order LED’s for the general area and cold metals Set for building inspection if it ever occurs Aushra: grant Gary access

Bylaws#Purpose Andrew - President Ed - Director at Large - Electronics, Cold Metals, NERP Simon - Secretary - Notes and things Rpi & audio this week Lyn

high temperatures (present record is 121 °C). Psychrophiles, which like it cold (one in Antarctic grows best at 4 °C) Halophiles, which live in high saline

for hot metals. $400 Electrical Install new power outlets for woodworking, cold metals and hot metals. Materials: conduit, wire, outlets. $1500 Plumbing

items from the racks between hot metals and the shopbot and the racks between cold metals and the wood shop Those racks are going away Ken for cleaning out

Woodshop Info Electronics Info, Events Arts Info Hot Metals Info, Events Cold Metals Info Small Metals Info Kitchen Info But wait, there's more! (someone

$73,652.05 PEX: $11,460.79 PayPal: $10,215.33 Donation boxes: CNC: $57.06 Cold metals: $6.25 Electronics: $25 Hot Metals: $5 Check to Alison Stanton for

the budget We should seal the hole in the server room, because it is very cold in there. James has heard reports that Adobe is not working on the new computers

Events Ray - PR director Simon - Secretary Anna - Electronics Area Host Dean - Cold Metals Area Host Andrew - CNC Area Host Erik - General Area Host Take out

pm Dubi is looking for a shaft ~1-2 ft long for a split-flap display Get a cold-rolled steel rod or 6061 aluminum rod from McMaster or Alro - www.myalro

Examples: hostarea=CNC or hostarea=General or hostarea=Kitchen or hostarea=Cold Metals There are 9 currently valid Hosted Area names. Could someone please

passes: 34 Aye - 3 nay - 1 abstain Jewelry_Tools_Vote Where will this go? Cold metals Ventilation? Measure passes: 36 Aye - 1 Nay - 1 Abstain Thanks to

Andrew Consider second authorizer when doing authorizer review next month Cold Metal Dean Woodshop Eric, already reviewed previous meeting Tool Cage Role:

taken care of - and will be tonight Lubrication system for horizontal mill in cold metals needs to be assembled, Dean picked up all the parts Clean up after

Metals Office Hours, Sunday: all things nonferrous and of moderate Tier One Cold Metals authorization happens Saturday at noon Do we have answers? Maybe.

final piece is the hot end for the extruder. It's very easy to build the 'cold end' which pushes the filament, but so far I have kept to purchasing hot

positions are. Reports from Committees Gen Ops New motor fit to heater in Cold Metals, waiting on parts to hook it up When this is done we will have 3 heaters

they be under? General area host, board, or shared under hot metals, wood, cold metals, etc. Let area hosts be in charge of their own tools Tool committee

Host Shellie | Arts & Crafts & Textiles & Digital Media Area Host Dean | Cold Metals Area Host Systems group is coming back together and expanding the

north wall, by panelboards Failed test 19 October 2021 EL-6 East wall between Cold and Small Metals, by panelboards PP1-2:3 Morrand (talk) 19:22, 19 October

Vote/CNC Area Budget 2015 Budget Vote/Electronics Area Budget 2015 Budget Vote/Cold Metals Area Host 2015 Budget Vote/Hot Metals Area Host 2015 Budget Vote/Kitchen

Plate Joiner (biscuit jointer) Pneumatic nail guns Cutoff saw Drill press Cold Metals Tier 1 Authorization Bridgeport mill MIG welder with Argon/CO2 gas

Hackers: 263 Full Members: 113 Total Members: 376 Quorum:38 Chase Home Depot Cold Metals & Tool Cage Account Maintenance Fee Rent Utilities Insurance Adobe

following are true: At ALL times if you are in main shop (wood, hot metals, cold metals, etc) even if you are sitting at a computer, not using tools, or on

material usage. 1st Floor 1. General Area(s) 2. CNC Area 3. Small Metals 4. Cold Metals 5. Hot Metals 6. Wood Shop 2nd Floor 7. Electronics 8. Graphic Arts

for tools. E.g. the Bridgeport mill and Clausing lathe require the "Tier 1" cold metal authorization; this guarantees mill or lathe users know how to use

should. Overshot sparge water temp, started anyway at 178F. Mash was probably colder than usual due to the emergency transfer. 90 mins at 2 mins from start add

Graphic Textiles TBD General Area Temporary Storage; Salvage Small Metals TBD Cold Metals Salvage; Sort-Me Zone (drill bits) Hot Metals Temporary Storage; Salvage

and build, yes. which i want to support < grumpermon> always imagine the cold sweat when you realize everything is fucked up <grumpermon> When will we

the space that they are interested in for example: Workshop AC Extraction ColdMetals Bandsaw Bridgeport BridgeportCNC Lathe HotMetals Forge Lincoln100 Lincoln125

Owner: Dean Anderson Description: Comments: Dean says he moved this back into cold metals. There were other things he said about it too. 16:07, 29 August 2015

Programmable LED displays are awwwwesome (and easy to make!) Lyn - Hacking cold weather Simon and/or other machine knitters - machine knitting scarves Jeremiah