Search results

Showing results for metals. No results found for Mentalis.

Metal
distinct areas for working with metals: Hot Metals is where you can weld, forge, roughly cut, etc. metals. Cold Metals is where you can do precise metalworking

355 bytes (47 words) - 21:53, 17 December 2016
Tier 1 Cold Metals Authorization (category Cold Metals) (section Tools Requiring Cold Metals Tier 1)
a current list of Cold Metals Tier 1 authorization volenteers We want as many people available to do Cold Metals Tier 1 authorizations as we can get. The

21 KB (1,531 words) - 05:25, 11 March 2024
Johnson Bandsaw (category Cold Metals)
straight. Go toward larger motor wheels for soft metals and plastic and smaller motor wheels for tough metals like steel (and tool steel.) The cutting tooth

12 KB (1,020 words) - 19:02, 10 October 2020
Rockwell drill press (category Cold Metals)
Rockwell drill press Area: Cold Metals https://ps1.mywikis.wiki/wiki/Rockwell_drill_press {{#subobject: |Has value=$500 }} 17" capacity (from the center

5 KB (623 words) - 17:42, 19 January 2021
Evenheat 810 Kiln (category Small Metals)
kiln when it reaches the desired temperature. Evenheat 810 Kiln Area: Small Metals https://ps1.mywikis.wiki/wiki/Evenheat_810_Kiln {{#subobject: |Has value=$865

6 KB (780 words) - 16:32, 6 February 2019
DoAll Bandsaw (category Cold Metals)
DoAll Bandsaw Area: Cold Metals https://ps1.mywikis.wiki/wiki/DoAll_Bandsaw {{#subobject: |Has value=900 }} This tool requires certification for use. The

15 KB (1,199 words) - 18:45, 10 October 2020
Bridgeport Knee Mill (category Cold Metals)
drilling and slotting in materials ranging from plastics to mild steel. Harder metals may be cut if special cutters and coolant are available. This machine is

10 KB (551 words) - 16:04, 21 August 2023
Lincoln Electric 3200HD (category Hot Metals)
Area: Hot Metals https://ps1.mywikis.wiki/wiki/Lincoln_Electric_3200HD {{#subobject: |Has value=$340 }} Essentially "a hot melt glue gun for metals". It releases

809 bytes (113 words) - 09:40, 7 January 2021
Big Blasting Cabinet (category Hot Metals)
Big Blasting Cabinet Area: Hot Metals https://ps1.mywikis.wiki/wiki/Big_Blasting_Cabinet {{#subobject: |Has value=$2500 }} Here because of the stickers

3 KB (503 words) - 00:55, 10 December 2022
Boyer Schultz 6-12 Surface Grinder (category Cold Metals)
silicon carbide abrasives are better suited to grinding cast iron, nonferrous metals and nonmetallic materials. The hardness of the material to be ground also

24 KB (2,669 words) - 21:16, 10 September 2021
Clausing Lathe (category Cold Metals)
Tier 1 Cold Metals Authorization Due to the complexity of the machine, individuals requesting for authorizations must either have prior metal lathe experience

5 KB (252 words) - 03:57, 22 December 2019
DeWalt Chop Saw (category Hot Metals)
DeWalt Chop Saw Area: Hot Metals https://ps1.mywikis.wiki/wiki/DeWalt_Chop_Saw {{#subobject: |Has value=$200 }} Tool appeared to be behaving normally during

406 bytes (43 words) - 09:32, 7 January 2021
Lincoln Electric 125HD WeldPak (category Hot Metals) (section Hot Metals Area)
Hot Metals area that has a more complete list of hot metals equipment. Check the calendar for events related to welding, particularly for Hot Metals office

6 KB (404 words) - 09:40, 7 January 2021
Millermatic 252 (category Hot Metals)
Millermatic 252 Area: Hot Metals https://ps1.mywikis.wiki/wiki/Millermatic_252 {{#subobject: |Has value=$3800 }} For safety tips and a general operational

3 KB (51 words) - 01:34, 13 June 2021
AcmeAnvil (category Hot Metals)
AcmeAnvil Area: Hot Metals https://ps1.mywikis.wiki/wiki/AcmeAnvil {{#subobject: |Has value=$1800 }} Authorization on this anvil is done as part of the

1 KB (79 words) - 09:20, 7 January 2021
48in sheet metal brake (category Cold Metals)
48in sheet metal brake Area: Cold Metals https://ps1.mywikis.wiki/wiki/48in_sheet_metal_brake {{#subobject: |Has value=$750.00 }} For straight line bends

863 bytes (83 words) - 01:01, 7 July 2017
Big Powder Coating Oven (category Hot Metals)
Big Powder Coating Oven Area: Hot Metals https://ps1.mywikis.wiki/wiki/Big_Powder_Coating_Oven {{#subobject: |Has value=$2500 }} Purchased per Vote to

736 bytes (59 words) - 22:13, 2 May 2022
Forge (category Hot Metals)
Forge Area: Hot Metals https://ps1.mywikis.wiki/wiki/Forge {{#subobject: |Has value=$375 }} If you use the shop tank you are required to pay for your gas

4 KB (719 words) - 09:34, 7 January 2021
Lincoln Electric 100 WeldPak (category Hot Metals)
Lincoln Electric 100 WeldPak Dan Meyer Area: Hot Metals https://ps1.mywikis.wiki/wiki/Lincoln_Electric_100_WeldPak {{#subobject: |Has value=$500 }} !!

4 KB (190 words) - 09:39, 7 January 2021
ShapeOko2 CNC Router (category Cold Metals)
version Arrival Date 2014 Usability yes Contact CNC Area Host Where Cold Metals Authorization Needed yes Hackable Consult CNC Area Host Estimated Value

9 KB (1,109 words) - 21:01, 18 January 2023
Powder Coating Gun (category Hot Metals)
Powder Coating Gun Area: Hot Metals https://ps1.mywikis.wiki/wiki/Powder_Coating_Gun {{#subobject: |Has value=$100 }} Crash course in powder coating Here

763 bytes (57 words) - 09:42, 7 January 2021
Miller Dynasty 280DX (category Hot Metals)
energy-efficient inverter design and Auto-Line™ technology. Works! Ask the Hot Metals rep at Hot Metals Office Hours. See the PS1 calendar for office hours. As of early

3 KB (257 words) - 09:41, 7 January 2021
16 Ton Hydraulic Forging Press (category Hot Metals)
16 Ton Hydraulic Forging Press Sean Blum Area: Hot Metals https://ps1.mywikis.wiki/wiki/16_Ton_Hydraulic_Forging_Press {{#subobject: |Has value=$3000 }}

292 bytes (24 words) - 18:30, 10 February 2022
Acetylene Air Torch Jewelry (category Small Metals)
Acetylene Air Torch Jewelry Area: Small Metals https://ps1.mywikis.wiki/wiki/Acetylene_Air_Torch_Jewelry {{#subobject: |Has value=$200 }} This tool requires

4 KB (460 words) - 20:34, 5 March 2021
Bridgeport Knee Power Feed (category Cold Metals)
with which the trigger is pulled. Bridgeport Knee Power Feed Area: Cold Metals https://ps1.mywikis.wiki/wiki/Bridgeport_Knee_Power_Feed {{#subobject: |Has

2 KB (252 words) - 02:55, 3 January 2018
Boice Crane Drill Press (category Cold Metals)
value=$600 }} What is it? - Boice Crane Drill Press Who is sponsoring? - Cold Metals Host - Jim Brink Date published to the mailing list and RT- 06/11/2018 Asset

3 KB (283 words) - 02:46, 30 June 2020
Grizzly Mini Metal Lathe (7in x 12in) (category Cold Metals)
Grizzly Mini Metal Lathe (7in x 12in) PS1 Area: Cold Metals https://ps1.mywikis.wiki/wiki/Grizzly_Mini_Metal_Lathe_(7in_x_12in) {{#subobject: |Has value=$525

4 KB (146 words) - 19:11, 26 December 2020
LeBlond Regal (category Cold Metals)
following are prerequisites for authorization on the LeBlond 1 Tier 1 Cold Metals authorization 2 Canvas LeBlond course Base skills for authorization: 1.

7 KB (396 words) - 14:20, 29 October 2021
How Do I Get Authorized? (section Hot Metals)
on these machines, you should complete Tier 1 metals certification. Authorizations for various hot metal tools, including the MIG welder, TIG welder, and

7 KB (1,120 words) - 00:05, 23 September 2021
Hot Metals Belt Sander (category Hot Metals)
Hot Metals Belt Sander Area: Hot Metals https://ps1.mywikis.wiki/wiki/Hot_Metals_Belt_Sander {{#subobject: |Has value=$500 }} This is a brand new page

971 bytes (92 words) - 19:54, 13 March 2023
Belovac Vacuum Forming Machine (category Hot Metals)
Belovac Vacuum Forming Machine Area: Hot Metals https://ps1.mywikis.wiki/wiki/Belovac_Vacuum_Forming_Machine {{#subobject: |Has value=tbd }} This vacuum

15 KB (1,190 words) - 00:20, 23 September 2021
LapMaster (category Cold Metals)
LapMaster Area: Cold Metals https://ps1.mywikis.wiki/wiki/LapMaster {{#subobject: |Has value=$3000 }} Lapping video https://www.youtube.com/watch?v=fnoVV-RWIWY

729 bytes (40 words) - 22:46, 6 August 2019
Bend protractors (category Cold Metals)
Bend protractors Area: Cold Metals https://ps1.mywikis.wiki/wiki/Bend_protractors {{#subobject: |Has value=$400 }} Tom Judge

388 bytes (18 words) - 21:29, 7 January 2019
Beast Notcher (category Cold Metals)
Beast Notcher Area: Cold Metals https://ps1.mywikis.wiki/wiki/Beast_Notcher {{#subobject: |Has value=$500 }} Users are required to provide their own hole

1 KB (144 words) - 17:51, 11 February 2019
AmeriBrade Fastback 2x72 Belt Grinder (category Hot Metals)
AmeriBrade Fastback 2x72 Belt Grinder Sean Blum Area: Hot Metals https://ps1.mywikis.wiki/wiki/AmeriBrade_Fastback_2x72_Belt_Grinder {{#subobject: |Has

604 bytes (71 words) - 21:48, 21 March 2021
15 inch State Disk Sander (category Cold Metals)
15 inch State Disk Sander PS1 Area: Cold Metals https://ps1.mywikis.wiki/wiki/15_inch_State_Disk_Sander {{#subobject: |Has value=$500 }} This equipment

587 bytes (73 words) - 20:04, 5 November 2020
MZ75 Power Hammer (category Hot Metals)
MZ75 Power Hammer PS1 Area: Hot Metals https://ps1.mywikis.wiki/wiki/MZ75_Power_Hammer {{#subobject: |Has value=$5000 }} A certification process is still

1 KB (108 words) - 14:45, 31 March 2021
Miller Spectrum 2050 (category Hot Metals)
Miller Spectrum 2050 Area: Hot Metals https://ps1.mywikis.wiki/wiki/Miller_Spectrum_2050 {{#subobject: |Has value=$2000 }} The torch attached to the machine

707 bytes (89 words) - 21:46, 22 December 2021
1" x 90" Belt Sander (category Cold Metals)
1" x 90" Belt Sander Area: Cold Metals https://ps1.mywikis.wiki/wiki/1%22_x_90%22_Belt_Sander {{#subobject: |Has value=$300 }} Belt size 1" x 90" Power

673 bytes (43 words) - 16:59, 7 November 2018
Powder Coating Oven (category Hot Metals)
Powder Coating Oven Area: Hot Metals https://ps1.mywikis.wiki/wiki/Powder_Coating_Oven {{#subobject: |Has value=$150 }} This is the small toaster oven

433 bytes (40 words) - 17:33, 23 March 2022
AIM Kiln 1413 (category Small Metals)
AIM Kiln 1413 PS1 Area: Small Metals https://ps1.mywikis.wiki/wiki/AIM_Kiln_1413 {{#subobject: |Has value=~$600-900 }} A kiln is a thermally insulated

3 KB (410 words) - 00:43, 19 September 2020
Bridgeport Horizontal Attachment (category Cold Metals)
Date Dec 2013 Usability yes Contact Area Host (Dean Anderson) Where Cold Metals Authorization Needed yes Hackable no Estimated Value $800 Host Area {{{hostarea}}}

854 bytes (112 words) - 20:04, 17 December 2016
Budget Balance
Active 11/15/23 None Cold Metals 5400 1,467.13 Active 11/15/23 None Woodshop 15,350 11,681.21 Active 11/15/23 None Small Metals 4300 463.10 Ordered 10/18/22

2 KB (151 words) - 04:02, 16 November 2023
Tormach 1300PL CNC Plasma Cutter (category Hot Metals)
Tormach 1300PL CNC Plasma Cutter Area: Hot Metals https://ps1.mywikis.wiki/wiki/Tormach_1300PL_CNC_Plasma_Cutter {{#subobject: |Has value=$20,000 }} Will

4 KB (631 words) - 12:38, 10 May 2023
Electrical (section Cold Metals, General Shop, Small Metals)
electrical panels. There is a switch next to the HotMetals street door that turns on the very center of Hot Metals & the Wood shop, it is a 3-way with a switch

20 KB (1,211 words) - 15:47, 11 February 2023
ER25 Tooling
A set of ER25 tooling. ER25 Tooling McTavish McArdle Area: Cold Metals https://ps1.mywikis.wiki/wiki/ER25_Tooling {{#subobject: |Has value=$200 }} This

1 KB (137 words) - 15:19, 20 December 2019
Member Storage Registry
then across. The beige lockers between the general work area and the Cold Metals area

4 KB (235 words) - 22:53, 18 May 2024
Kerr Centrifico Casting Machine
Kerr Centrifico Casting Machine Area: Hot Metals https://ps1.mywikis.wiki/wiki/Kerr_Centrifico_Casting_Machine {{#subobject: |Has value=? }} Start burnout

2 KB (263 words) - 13:16, 8 May 2023
Ridgid WD40700 Shop Vac
have three of these. One lives by mill in Cold Metals, and two in General area/small metals area / cold metals intersection. They've been retrofitted with

733 bytes (92 words) - 20:33, 24 August 2022
Angle Grinder (4.5in)
of shop privileges. 1. Angle grinders typically throw sparks when cutting metal. Make sure that there's nothing flammable in the direction sparks will fly

5 KB (381 words) - 00:35, 2 December 2019
Ryobi 6" grinder
Ryobi 6" grinder Area: Hot Metals https://ps1.mywikis.wiki/wiki/Ryobi_6%22_grinder {{#subobject: |Has value=DOLLARS }} This tool requires certification

318 bytes (25 words) - 10:25, 7 January 2021
Toaster Oven (redirect from Toaster oven small metals) (category Small Metals)
Toaster Oven PS:One Small Metals Area: Small Metals https://ps1.mywikis.wiki/wiki/Toaster_Oven {{#subobject: |Has value=$60 }}

268 bytes (19 words) - 23:21, 25 June 2017
Small Metals Area Budget Vote (Fall 2016)
vote date To provide a budget for the small metals area for the rest of this year. Authorize the Small Metals Area Host to spend up to $1200 Authorization

574 bytes (76 words) - 04:39, 7 October 2016
Cold Metals Wishlist
Tools members would like to see in the cold metals area. Parts washer (solvent type) Ultrasonic parts washer Slip roller Stomp shear Cold cut saw dimple

1 KB (231 words) - 13:51, 11 April 2017
Cold Metals Vertical Bandsaw Vote
cold metals area, if there is not space available directly in the cold metals area the vertical bandsaw would be located as close to the cold metals area

4 KB (578 words) - 17:43, 11 April 2018
Authorizations (section Small Metals)
[email protected] All small metals authorizations are by-request. All small metals authorizations are by-request. The Hot Metals general auth is a prerequisite

8 KB (161 words) - 16:12, 22 October 2023
Pro32 Bender (category Cold Metals)
Pro32 Bender Area: Cold Metals https://ps1.mywikis.wiki/wiki/Pro32_Bender {{#subobject: |Has value=$800 }} These dies are for use with structual tubing

534 bytes (56 words) - 21:27, 7 January 2019
Leg Vise (category Hot Metals)
Leg Vise PS1 Area: Hot Metals https://ps1.mywikis.wiki/wiki/Leg_Vise {{#subobject: |Has value=$250 }}

337 bytes (17 words) - 02:24, 26 June 2020
Ridgid WD4070 (category Cold Metals)
Ridgid WD4070 Area: Cold Metals https://ps1.mywikis.wiki/wiki/Ridgid_WD4070 {{#subobject: |Has value=$87 }} This item is VAC, WD4070 4 GALLON 31653 Lightweight

910 bytes (111 words) - 21:15, 31 December 2020
Spot Welder (category Hot Metals)
Welder Area: Hot Metals https://ps1.mywikis.wiki/wiki/Spot_Welder {{#subobject: |Has value=$200 }} Light duty joining of thin metals by resistance welding

1 KB (111 words) - 10:19, 7 January 2021
Columbia powder coating gun (category Hot Metals)
Columbia powder coating gun Area: Hot Metals https://ps1.mywikis.wiki/wiki/Columbia_powder_coating_gun {{#subobject: |Has value=$828 }} Safety data sheets

807 bytes (35 words) - 10:10, 7 January 2021
Drill Doctor 750X (category Cold Metals)
Drill Doctor 750X PS1 Area: Cold Metals https://ps1.mywikis.wiki/wiki/Drill_Doctor_750X {{#subobject: |Has value=$140 }} Manual -> https://wiki.pumpingstationone

358 bytes (32 words) - 02:58, 27 February 2019
Evolution 15-Inch Steel Cutting Chop Saw (category Hot Metals)
Evolution 15-Inch Steel Cutting Chop Saw Area: Hot Metals https://ps1.mywikis.wiki/wiki/Evolution_15-Inch_Steel_Cutting_Chop_Saw {{#subobject: |Has value=$500

245 bytes (26 words) - 16:35, 16 February 2022
Beverly Shear (category Cold Metals)
Area: Cold Metals https://ps1.mywikis.wiki/wiki/Beverly_Shear {{#subobject: |Has value=~500 }} The Beverly shear is for cutting sheet metal up to 10 gauge

1 KB (106 words) - 16:02, 19 March 2019
English Wheel (category Cold Metals) (section Metal Selection)
wheels. The most common metals used in the English wheel are mild carbon steel, aluminum, stainless steel, copper and brass. Some metals may benefit from annealing

3 KB (279 words) - 20:17, 9 April 2024
Acetylene Air Torch (category Hot Metals)
MODEL NUMBER Arrival Date 5/13 Usability yes Contact Ron Olson Where Hot Metals Authorization Needed yes Hackable no Estimated Value $100 Host Area {{{hostarea}}}

637 bytes (76 words) - 09:27, 7 January 2021
Baldor 510 Tool Grinder (category Cold Metals)
Baldor 510 Tool Grinder Area: Cold Metals https://ps1.mywikis.wiki/wiki/Baldor_510_Tool_Grinder {{#subobject: |Has value=$125 }} This is a tool grinder;

2 KB (266 words) - 05:07, 18 March 2021
Induction Heater Atlas Tocco (category Hot Metals)
Induction Heater Atlas Tocco "PS:One" Area: Hot Metals https://ps1.mywikis.wiki/wiki/Induction_Heater_Atlas_Tocco {{#subobject: |Has value=? }} Ready for

4 KB (519 words) - 12:43, 8 May 2023
Quickbooks
Cold Metals Area (Area host budget) Electronics Area (Area host budget) General Area (Area host budget) Kitchen Area (Area host budget) Hot Metals Area

2 KB (331 words) - 18:44, 20 October 2015
Quincy Air Compressor (category Cold Metals)
worktables in General, Wood and Hot metals back door next to small metals wall of cold metals shopbot West wall of hot metals lasers for air assist The compressor

3 KB (461 words) - 12:49, 18 October 2021
Sherline MiniMill (category Cold Metals)
Make/Model Sherline Model 5000 Arrival Date 2010 Usability yes Contact Host Cold Metals Where Removed Authorization Needed no Hackable no Estimated Value ~$500

2 KB (67 words) - 21:51, 25 June 2020
Main Page
Woodshop Info Electronics Info, Events Arts Info Hot Metals Info, Events Cold Metals Info Small Metals Info Kitchen Info But wait, there's more! (someone

6 KB (160 words) - 16:35, 7 March 2024
Slot Forge
Slot Forge "PS:One" Area: Hot Metals https://ps1.mywikis.wiki/wiki/Slot_Forge {{#subobject: |Has value=? }} A certification process is still being worked

1 KB (194 words) - 21:45, 21 March 2021
Broken Authorization (section Hot Metals)
pumpingstationone.org/Tier_1_Cold_Metals_Authorization The following tools fall under Tier 1 Authorization: Central Machinery Metal Bandsaw DoAll Drill Press,

1 KB (189 words) - 19:12, 29 June 2017
Hulk Tube Roller (category Cold Metals)
Hulk Tube Roller Area: Cold Metals https://ps1.mywikis.wiki/wiki/Hulk_Tube_Roller {{#subobject: |Has value=$1800 }} The SWAG Tubing Roller “Hulk” is used

8 KB (1,312 words) - 19:23, 1 May 2019
Safety
electronics at the left of the bench 1. Loading dock. inside door in Cold Metals 2. Small Metals. 3. Kitchen, to the left of the door leading to the workshop area

7 KB (1,006 words) - 02:40, 10 September 2020
Space Plan Vote
space. Cold metals and jewelry expand into the current woodshop. Plan 3: Woodworking expands into the cold metals area. Cold and hot metals moves to the

3 KB (529 words) - 02:49, 6 July 2016
Hobart beta-mig 200
Hobart beta-mig 200 Ed Bennett and Anna Yu Area: Hot Metals https://ps1.mywikis.wiki/wiki/Hobart_beta-mig_200 {{#subobject: |Has value=$500 }} For safety

1 KB (67 words) - 22:07, 27 December 2018
Removed box for spraying stuff at stuff and removing surface stuff
Removed box for spraying stuff at stuff and removing surface stuff Area: Hot Metals https://ps1.mywikis.wiki/wiki/Removed_box_for_spraying_stuff_at_stuff_a

795 bytes (104 words) - 15:38, 17 November 2022
Sears Belt Sander
351.215132 Arrival Date 12/01/12 Usability yes Contact Ron Olsen Where Hot Metals Authorization Needed yes Hackable NO Estimated Value DOLLARS Host Area {{{hostarea}}}

316 bytes (26 words) - 09:43, 7 January 2021
Rockwell Delta 20" Bandsaw
it is usable but blade stability is poor. NEW guide made by helpful cold metals. . 8/2019. Drive belt and pulley came off drive shaft. Eric and Gary replaced

5 KB (870 words) - 14:34, 3 July 2022
Bridgeport CNC Mill
Bridgeport CNC Mill Area: Cold Metals https://ps1.mywikis.wiki/wiki/Bridgeport_CNC_Mill {{#subobject: |Has value=~$2000 }} What is it? - Bridgeport CNC

16 KB (2,717 words) - 18:26, 11 August 2018
HVAC
circuit feeds the four unit heaters in the north shop (General, Cold Metals, and Small Metals). The unit heaters are set up so that they will not start until

12 KB (2,140 words) - 03:30, 14 December 2020
V-Block Set (4 piece)
and two pairs of clamps. V-Block Set (4 piece) McTavish McArdle Area: Cold Metals https://ps1.mywikis.wiki/wiki/V-Block_Set_(4_piece) {{#subobject: |Has value=$120

456 bytes (54 words) - 15:18, 20 December 2019
Classes/Tube Bending
Where: Hot Metals Instructor: TBD Minimum Class size: 5 Maximum Class size: 10 10 feet of 1" 0.065" wall tubing, you can pick this up from metal supermarkets

1 KB (180 words) - 20:36, 7 January 2019
Board Meeting Notes 2017-03-08
is the current approved area map [Small Metals Map] Skilton's draft map: [proposed area map 1/2017] Small metals is not in the place that is marked on this

5 KB (612 words) - 03:33, 9 March 2017
SawStop table saw
Anything Laser-Cut. Yes, I'm saying it again. Wet Wood Aluminum and Other Metals. This also means that wood with nails, staples, etc. will trigger it. Wet

20 KB (1,294 words) - 15:46, 20 October 2021
Proto-Form Vacuum Forming Machine
location is in the General Work Area adjacent to the Kitchen, Small Metals and Cold Metals. Authorization will be required. Authorization format is TBD. Plans

4 KB (603 words) - 18:18, 12 July 2018
Meeting Notes 2014-02-25
games or play ours! Wednesday, Thursday, and Saturday, Ed will be doing Cold Metals authorization. Check the list for timing. Mandatory for Bridgeport certs

2 KB (239 words) - 21:02, 29 March 2014
RailAnvil
Make/Model Rock Island Arrival Date ? Usability yes Contact Ron Olson Where Hot Metals Area Authorization Needed no Hackable no Estimated Value meh Host Area {{{hostarea}}}

267 bytes (22 words) - 05:00, 10 June 2015
Shop Improvements
(Sevin) Fire lane marking Hot Metals Cold Metals Electronics Lounge Arts and Crafts Move inflamables cabinet away from cold metals fire lane and against a real

5 KB (739 words) - 20:54, 30 September 2014
Harbor Freight Abrasive Blast Cabinet
3.html - TODO update this documentation further. Currently found in hot metals. Do not point the abrasive gun at the window or the gloves. Keep the stream

1 KB (181 words) - 16:56, 16 August 2017
Board Meeting Notes 2013-07-30
the position of "Hot Metals Area Host" Remove Adrianna from her position as Wood Shop Area Host Appointed Adrianna as Hot Metals Area Host Appointed Matt

5 KB (771 words) - 19:00, 29 March 2014
Central Machinery Metal Bandsaw
Station: One Central Machinery Metal Bandsaw Area: {{{hostarea}}} https://ps1.mywikis.wiki/wiki/Central_Machinery_Metal_Bandsaw Owner/Loaner: PS:One Serial

2 KB (162 words) - 04:09, 19 January 2018
Hypertherm Powermax 45 Plasma Cutter
Hypertherm Powermax 45 Arrival Date Yes Usability yes Contact Ron Olson Where Hot Metals Authorization Needed yes Hackable no Estimated Value $2000 Host Area Removed

569 bytes (70 words) - 20:15, 7 December 2022
Hot Metals Laptop
Hot Metals Laptop Ron Olson Area: Hot Metals https://ps1.mywikis.wiki/wiki/Hot_Metals_Laptop {{#subobject: |Has value=Sum }} This laptop is available for

653 bytes (70 words) - 22:07, 27 December 2018
Small Metals Wishlist
Tools members would like to see in the small metals area.

132 bytes (11 words) - 17:27, 9 April 2017
Hot Metals Shop/Budget/2014 (section Host Metals Shop Budget - 2014)
Allocated 2014 budget: $3,447 Remaining 2014 budget: $2,937.09 Tracking sheet in drive: Sheet

425 bytes (14 words) - 23:51, 10 June 2014
Hot Metals Shop/Tidy Space/2014-05-8 (section Hot Metals Tidy Space 2014-05-8)
All tickets expire 2014-05-13 after which items will be placed in limbo. Ikea Desk Frame Misc Hollow Aluminum Legs Various pieces of steel Box of pulleys

932 bytes (50 words) - 14:09, 9 May 2014
Sawstop Industrial Table Saw
to the owner's manual: "Conductive materials such as aluminum and other metals, carbon fiber materials, mirrored acrylic, carbon-filled materials, etc

7 KB (1,001 words) - 20:09, 14 October 2022
Hot metals wishlist
Tools members would like to see in the hot metals area. Hand held air belt sander Grinder accessories Coarse and medium wheels for pedestal grinder. New

976 bytes (135 words) - 17:23, 2 May 2017
Vote to improve hot metals air quality
Jet AFS-1000B ~$1000 Metal dust collector for attaching to the grinders Jet JDC-501 ~$1300 Extending the wall between hot metals and the wood shop to the

1 KB (168 words) - 15:53, 25 April 2017
Ventilation for Hot Metals Area Vote
to the left of the fire lane (as you look to the back door) where the Hot Metals Area will reside. Please See the attached SUPER ACCURATE* drawing for clarification

1 KB (157 words) - 00:31, 18 March 2014
Bench Grinder (6in)
wheel. 9. Do not grind soft materials such as wood, rubber or non-ferrous metals such as copper or aluminum. Soft material can clog up the face of the wheels

10 KB (1,183 words) - 20:32, 13 February 2019
2017 Small Metals Area Budget Vote
List Announcement: ??? Officially Proposed: ??? Voted on: ??? The Small Metals area is seeking $8000 for the next fiscal year (FY 2017-18). Since this

1 KB (179 words) - 20:19, 23 January 2017
Hot Metals Post Spawl Upgrades Vote
Announcement: 7/29/2016 Officially Proposed: To be Voted on: After the move hot metals will need some more equipment to make the area safe and useable. The idea

1 KB (188 words) - 02:00, 1 August 2016
2020 Hot Metals Area Budget Vote
minus funds used from the Temporary_2020_Area_Host_Budget, to cover Hot Metals Area expenditures for the fiscal year of 2020. The board assigns this spending

1 KB (158 words) - 14:35, 29 January 2020
Welding (category Hot Metals) (section Hot Metals Area)
Hot Metals Area Host is pretty good about figuring out how to get you authorized for welding. https://wiki.pumpingstationone.org/Category:Hot_Metals This

1 KB (198 words) - 03:06, 6 July 2018
Vibratory Tumbler (category Small Metals)
Vibratory Tumbler Area: Small Metals https://ps1.mywikis.wiki/wiki/Vibratory_Tumbler {{#subobject: |Has value= }}

235 bytes (15 words) - 13:16, 8 May 2023
Welding DJ Stand (category Hot Metals)
Welding DJ Stand DuoRose Area: Hot Metals https://ps1.mywikis.wiki/wiki/Welding_DJ_Stand {{#subobject: |Has value=Dollars }} Manufacturer's page for this

355 bytes (24 words) - 19:26, 23 January 2022
Jet Bench Grinder (category Hot Metals)
Jet Bench Grinder Area: Hot Metals https://ps1.mywikis.wiki/wiki/Jet_Bench_Grinder {{#subobject: |Has value=$400 }} Two-wheel bench grinder.

281 bytes (22 words) - 17:10, 14 March 2023
2017 Hot Metals Area Budget Vote
Officially Proposed: 2017-12-13 (planned) Voted on: 2017-12-20 (planned) The hot metals area is seeking $7500 for the next fiscal year (FY 2017-18). This amount

3 KB (382 words) - 20:17, 23 January 2017
Cold Metals Tool Cabinet Reimbursement
Everett Wilson 2014-03-11: First draft of the vote. 2014-03-11: Sent to the mailing list, with a proposed vote date of the 18th. 2014-03-18: Vote passed

2 KB (270 words) - 21:43, 28 March 2014
Hydraulic Lift Table (category Cold Metals)
Hydraulic Lift Table Area: Cold Metals https://ps1.mywikis.wiki/wiki/Hydraulic_Lift_Table {{#subobject: |Has value=$500 }} Be extremely careful when moving

430 bytes (43 words) - 01:43, 11 May 2017
Gantry Crane (category Hot Metals)
Gantry Crane Area: Hot Metals https://ps1.mywikis.wiki/wiki/Gantry_Crane {{#subobject: |Has value=$2500 }} The crane is rated for two tons (4000 lbs).

315 bytes (25 words) - 15:26, 30 March 2023
Pramac Pallet Jack (category Cold Metals)
Pramac Pallet Jack Area: Cold Metals https://ps1.mywikis.wiki/wiki/Pramac_Pallet_Jack {{#subobject: |Has value=$500 }} The jack is fairly narrow. Be sure

319 bytes (29 words) - 02:07, 27 April 2017
Hitachi Chop Saw (category Hot Metals)
Hitachi Chop Saw Area: Hot Metals https://ps1.mywikis.wiki/wiki/Hitachi_Chop_Saw {{#subobject: |Has value=$500 }}

560 bytes (18 words) - 09:34, 7 January 2021
DiArco sheet metal notcher (category Cold Metals)
DiArco sheet metal notcher Area: Cold Metals https://ps1.mywikis.wiki/wiki/DiArco_sheet_metal_notcher {{#subobject: |Has value=$500 }} blades may need

477 bytes (49 words) - 19:34, 28 August 2018
Hydrogen Torch (category Small Metals)
Hydrogen Torch Area: Small Metals https://ps1.mywikis.wiki/wiki/Hydrogen_Torch {{#subobject: |Has value=$1500 }} Contact the area host or one of the other

767 bytes (50 words) - 20:56, 19 June 2018
The Past Area Hosts and Volunteers
Hot Metals- Cold Metals- Wood Shop- CNC- Andrew Carmandela Electronics- Arts and Crafts- Kitchen-arturo Duarte General Area- Hot Metals- Cold Metals- Wood

2 KB (335 words) - 21:23, 21 October 2021
Milwaukee 6850 Metal Shear (category Cold Metals)
Milwaukee 6850 Metal Shear Area: Cold Metals https://ps1.mywikis.wiki/wiki/Milwaukee_6850_Metal_Shear {{#subobject: |Has value=$? }} 18 Gauge Max User

350 bytes (24 words) - 20:34, 17 December 2016
2015 Budget Vote/Hot Metals Area Host
Back to 2015 Budget Vote Prepared by: Tom Judge Total Budget required: $ 5,000.00

2 KB (14 words) - 19:11, 10 April 2018
Emerson 7in Horz Bandsaw (category Hot Metals)
Emerson 7in Horz Bandsaw Area: Hot Metals https://ps1.mywikis.wiki/wiki/Emerson_7in_Horz_Bandsaw {{#subobject: |Has value=$200 }} Working NOTE! If it doesn't

496 bytes (49 words) - 10:10, 7 January 2021
Oontz (category Hot Metals)
Ron Olson Area: Hot Metals https://ps1.mywikis.wiki/wiki/Oontz {{#subobject: |Has value=$75 }} This is a speaker in the Hot Metals area, by the cabinet

564 bytes (55 words) - 10:22, 7 January 2021
2015 Budget Vote/Cold Metals Area Host
Back to 2015 Budget Vote Prepared by: Dean Anderson Total Budget Required: $ 6,000.00

3 KB (14 words) - 19:10, 10 April 2018
2017 Cold Metals Area Budget Vote
sheet metal equipment, so that's what I'll be looking for. While 2016 is not yet reconciled, so the values provided might not be final, Cold Metals actually

3 KB (425 words) - 20:14, 23 January 2017
Shear Brake and Roll Jet (category Cold Metals)
Area: Cold Metals https://ps1.mywikis.wiki/wiki/Shear_Brake_and_Roll_Jet {{#subobject: |Has value=$750 }} Used to cut, bend and curve sheet metal up to 20gauge

468 bytes (53 words) - 14:33, 27 August 2018
Industrial Scale (category Hot Metals)
Industrial Scale Area: Hot Metals https://ps1.mywikis.wiki/wiki/Industrial_Scale {{#subobject: |Has value=$300 }} The maximum load for the scale is 400

858 bytes (121 words) - 20:11, 18 September 2021
2019 Hot Metals Area Budget Vote
minus funds used from the Temporary 2019 Area Host Budget, to cover Hot Metals Area expenditures for the fiscal year of 2019. The board assigns this spending

3 KB (343 words) - 02:14, 15 February 2019
2019 Cold Metals Area Host Vote
minus funds used from the Temporary 2019 Area Host Budget, to cover Cold Metals Area expenditures for the fiscal year of 2019. The board assigns this spending

3 KB (343 words) - 02:12, 15 February 2019
2019 Small Metals Area Budget Vote
minus funds used from the Temporary 2019 Area Host Budget, to cover Small Metals Area expenditures for the fiscal year of 2019. The board assigns this spending

3 KB (343 words) - 02:19, 15 February 2019
Tidy Space Deputies (section Hot Metals)
This page is where your name goes if you've been authorized by an area host to perform TidySpace duties as per the Tidy_Space_Policy. Deputies are selected

2 KB (96 words) - 18:20, 12 September 2019
2018 Cold Metals Area Host Vote
minus funds used from the Temporary 2018 Area Host Budget, to cover Cold Metals Area expenditures for the fiscal year of 2018. The board assigns this spending

3 KB (406 words) - 17:53, 25 January 2018
2018 Small Metals Area Budget Vote
minus funds used from the Temporary 2018 Area Host Budget, to cover Small Metals Area expenditures for the fiscal year of 2018. The board assigns this spending

3 KB (406 words) - 17:54, 25 January 2018
2018 Hot Metals Area Budget Vote
minus funds used from the Temporary 2018 Area Host Budget, to cover Hot Metals Area expenditures for the fiscal year of 2018. The board assigns this spending

3 KB (406 words) - 17:54, 25 January 2018
Oliver Instrument Die Filer (category Cold Metals)
Oliver Instrument Die Filer Area: Cold Metals https://ps1.mywikis.wiki/wiki/Oliver_Instrument_Die_Filer {{#subobject: |Has value=$500 }} r== Notes == Most

847 bytes (90 words) - 23:31, 27 February 2020
Facilities (section Metals)
host, budget, and equipment) for working with metals: where you can weld, forge, roughly cut, etc. metals. where you can do precise metalworking with large

4 KB (452 words) - 01:15, 9 October 2022
Powermatic drill press (category Cold Metals)
Powermatic drill press Area: Cold Metals https://ps1.mywikis.wiki/wiki/Powermatic_drill_press {{#subobject: |Has value=$1700 }} Swing (In.) 18 Spindle

2 KB (306 words) - 23:26, 30 June 2018
Eclipse Scroll Saw (category Cold Metals)
Eclipse Scroll Saw Area: Cold Metals https://ps1.mywikis.wiki/wiki/Eclipse_Scroll_Saw {{#subobject: |Has value=$999 }} The Eclipse Scroll Saw frame utilizes

2 KB (259 words) - 05:03, 22 February 2021
Meeting Notes 2017-07-25 (section Hot Metals)
Intro to PS1 and what we're about. (2 mins MAX) Tour leaves (new people) Update from the BoD about what's going Update from area hosts about what's going

2 KB (199 words) - 01:30, 26 July 2017
Area Improvements and Projects (section Hot Metals Area)
space to open cable raceways. Clean up/reorganize the safe. Crimp cables and metal tags/labels to all calipers Clean and lubricate the Shopbot guide rails Clean

885 bytes (116 words) - 14:57, 8 October 2017
Meeting Notes 2017-03-15
borrow from MIBS Rules#Meeting Procedures. Andrew - President Ed - hot hot metals Simon - Secretary Anna - Electronics Area Host - Electronics! Gerald - Kitchen

4 KB (523 words) - 01:09, 22 March 2017
Lassy Tapper Hand Tapping Machine (category Cold Metals)
thread is hanging on the wall in Cold Metals. Adapter and Master Column Height Adjust Collar Drill Chart in Cold Metals Cabinet for Lassy Tapper The cabinet

2 KB (345 words) - 14:37, 24 June 2020
Olympus Microscope (category Cold Metals)
Olympus Microscope Area: {{{hostarea}}} https://ps1.mywikis.wiki/wiki/Olympus_Microscope {{#subobject: |Has value= }} Donated by Jeff Lawson. Missing one

337 bytes (26 words) - 02:00, 25 May 2018
Strong Hand 3-Axis Fixture Vise (category Hot Metals)
Strong Hand 3-Axis Fixture Vise Area: Hot Metals https://ps1.mywikis.wiki/wiki/Strong_Hand_3-Axis_Fixture_Vise {{#subobject: |Has value=$222 }} The Strong

1 KB (186 words) - 02:06, 18 December 2017
Volunteer Positions (section Cold Metals)
[at] pumpingstationone [dot] org slack handle: @Ally slack channels small-metals Sam Paris email: woodshop [at] pumpingstationone [dot] org slack handle:

8 KB (951 words) - 02:44, 27 November 2023
Recurring Maintenance (section Hot Metals Area)
Doall bandsaw- oil Reeves drive shaft (SAE 10 in oil cup under the big metal cover). Grease Johnson bandsaw (2 zerks on pivot shaft). Sweep Put away tools

1 KB (189 words) - 17:26, 17 February 2017
Dyna Kiln N100 (category Small Metals)
Dyna Kiln N100 "PS:One" or link to user page of contact person Area: Small Metals https://ps1.mywikis.wiki/wiki/Dyna_Kiln_N100 {{#subobject: |Has value=$999

3 KB (349 words) - 00:51, 4 May 2023
Blacksmithing Area (category Hot Metals)
a sub section of the Hot Metals Hosted Area, which has a wiki page here: https://wiki.pumpingstationone.org/Category:Hot_Metals Other Hosted Areas are listed

6 KB (572 words) - 07:20, 15 March 2023
Tormach 1100 series CNC mill
PS1 Standard Tool Library Stepdown and Stepover Spreadsheet Tier 1 Cold Metals For basic cutting and drilling of stock using Johnson Saw, DoAll Bandsaw

8 KB (951 words) - 19:36, 23 December 2023
Hosted Areas Planning Work Products (section Hot Metals)
potential, larger washup sink. High Hazard Occupancy (Class I) Wood shop and hot metals classified as a high hazard due to dust, compressed air, flammable gases

3 KB (499 words) - 18:03, 29 July 2017
Dust Monitoring
monitor. As of 10/18/2017, it is on the shelf next to the Hot Metals laptop, in the Hot Metals area. http://www.dylosproducts.com/downloads.html http://www

938 bytes (97 words) - 13:51, 18 October 2017
Stained Glass (section Working with glass in Small Metals Area)
steel work tables in Small Metals area. Cutting/grinding glass should be done on the the stainless steel work tables in Small Metals Area Never use the wood

2 KB (302 words) - 18:49, 20 November 2017
Rockwell Hardness Tester (category Cold Metals)
Rockwell Hardness Tester Area: Cold Metals https://ps1.mywikis.wiki/wiki/Rockwell_Hardness_Tester {{#subobject: |Has value=$500 }} The Rockwell scale is

4 KB (641 words) - 20:09, 23 January 2018
Meeting Notes 2017-05-30 (section Hot Metals)
pretty busy. Torch kit for TIG found on Amazon for $11. Andrew bought it. Hot Metals will no longer be stocking TIG parts. Buy your own. Wax casting workshops

2 KB (285 words) - 01:37, 31 May 2017
Recommended Gear/Kit (section Hot Metals)
Even though PS1 is a building sized toolbox in itself, you probably want your own gear handy when you need it. Here's suggested kit, adapt for your own

2 KB (284 words) - 18:15, 9 June 2023
2022 Budget Vote (section Cold Metals)
expires 12-31-2022. Authorize the board to spend up to $5,400 to cover Cold Metals expenditures for the fiscal year of 2022. The board assigns this spending

9 KB (1,008 words) - 06:14, 18 December 2021
2023 Budget Vote (section Cold Metals)
expires 12-31-2023. Authorize the board to spend up to $5,400 to cover Cold Metals expenditures for the fiscal year of 2023. The board assigns this spending

9 KB (1,014 words) - 02:03, 14 December 2022
2024 Budget Vote (section Cold Metals)
expires 12-31-2024. Authorize the board to spend up to $8,700 to cover Cold Metals expenditures for the fiscal year of 2024. The board assigns this spending

9 KB (990 words) - 02:08, 3 January 2024
Punching tools (category Small Metals)
Located on the small metals shelves are a number of letter & number punches, mainly with 1/4" or 3/8" shanks, of varying sizes. Also present is a jig for

3 KB (450 words) - 16:21, 13 September 2017
Jewelry Tools (category Small Metals)
Tools and supplies we need for making jewelry. Fire Bricks Loose pumice stone Ventilation (!) Burnout furnace (full-size) Cabbing machine Casting machine

2 KB (95 words) - 13:05, 8 May 2023
2021 Budget Vote (section Cold Metals)
expires 12-31-2021. Authorize the board to spend up to $4,300 to cover Cold Metals expenditures for the fiscal year of 2021. The board assigns this spending

10 KB (1,081 words) - 21:28, 14 December 2021
Meeting Notes 2017-08-01 (section Hot Metals)
Propane cylinder has been replaced as of Friday Ron will be out of town for the last two weeks of August. All cylinders will be filled before he leaves

2 KB (338 words) - 01:51, 2 August 2017
Ladders
extension ladder is in hot metals now but will be hung on wall in NW corner of Woodshop. Eight foot A frame ladder is in Small metals. 4 foot a frame ladder

1 KB (163 words) - 16:57, 4 April 2022
Meeting Notes 2017-08-15 (section Hot Metals)
brought in a central air blower. Could be the start of ventilation for small metals. Need to run some ducting from the existing hole in the middle of the shop

3 KB (361 words) - 01:46, 16 August 2017
Board Meeting Notes 2016-09-20 (section Small Metals Area Host position)
would they be under? General area host, board, or shared under hot metals, wood, cold metals, etc. Let area hosts be in charge of their own tools Tool committee

6 KB (764 words) - 17:12, 4 October 2016
2019 Budget Vote (section Cold Metals)
minus funds used from the Temporary 2020 Area Host Budget, to cover Cold Metals Area expenditures for the fiscal year of 2020. The board assigns this spending

11 KB (1,122 words) - 03:16, 28 November 2021
2020 Budget Vote (section Cold Metals)
minus funds used from the Temporary 2020 Area Host Budget, to cover Cold Metals Area expenditures for the fiscal year of 2020. The board assigns this spending

11 KB (1,143 words) - 03:16, 28 November 2021
Tool Cage - Fastener Storage Vote
type as what is in Cold Metals. Spend $600 to purchase a used cabinet like the one currently holding the tooling in the Cold Metals area. Here is the vote

2 KB (295 words) - 14:36, 29 July 2014
2015 Budget PLAN C Vote
Area Amount Electronics $3,000 Woodworking $3,000 CNC $3,000 Cold Metals $3,000 Hot Metals $3,000 Arts $3,000 Kitchen $3,000 Tool Cage $3,000 General $3,000

5 KB (529 words) - 02:54, 7 January 2015
Surveillance System
Front Door General/Cold Metals Hot Metals - Ext Door Hot Metals - Plasma Cutter Hot Metals - Work Areas Server Room Small Metals - Back Door Woodshop -

1 KB (200 words) - 03:19, 28 November 2021
The Great Shop Shuffle (section Hot metals)
This is the page to organize the great shop shuffle. We need to get all this stuff that has accumulated through the tidy space policy. Initial Shop Tidy

585 bytes (76 words) - 00:31, 18 March 2014
Meeting Notes 2017-06-27 (section Hot Metals)
awesome. IF YOU ARE HERE LATE, PLEASE SHUT THE DOORS. Please. Key to hot metals gate appears to be gone. Tomorrow is Tau day - double pi & pie! Party tomorrow

4 KB (487 words) - 01:50, 28 June 2017
Hot Metal Shop Plans for 2019 (category Hot Metals)
These are the ideas and goals I'm looking forward to in 2019 for the Hot Metal Shop. Folks can add items and as items are done (or deferred or just outright

2 KB (295 words) - 15:19, 5 July 2020
Board Meeting Notes 2019-12-17
Marshall - Cold metals authorizer Malcolm Stevens - CNC? authorizer Woodshop authorizers Online Filament 3D printing Auth Small metals reimbursement Technology

3 KB (372 words) - 02:00, 18 December 2019
Meeting Notes 2018-01-02
shelves directly next to member storage shelves in general work area near cold metals are going to become member storage, so please remove your stuff. Pasta maker

989 bytes (118 words) - 02:28, 3 January 2018
Vote to change the Kitchen Zone (section Cold Metals)
intended for small metals, is considered part of the general area, and is now being occupied by cold metals. Both General area and Cold Metals are in agreement

5 KB (744 words) - 06:47, 23 September 2017
Doorbell
is wireless and has chimes with strobe lights in a) cold metals above desk. b) between hot metals and the woodshop. Loud enough to be heard in most of the

1 KB (149 words) - 01:29, 18 February 2023
2017 Budget
Arts and Textiles Budget Vote 2017 Hot Metals Area Budget Vote 2017 Kitchen Area Budget Vote 2017 Small Metals Area Budget Vote 2017 Woodshop Area Budget

638 bytes (92 words) - 20:12, 23 January 2017
Sherline 8 inch lathe + milling column (category Cold Metals)
Area: Cold Metals https://ps1.mywikis.wiki/wiki/Sherline_8_inch_lathe_%2B_milling_column {{#subobject: |Has value=$1500 }} Tier 1 Cold Metals Authorization

11 KB (879 words) - 19:25, 7 July 2020
How to financials (section Hot Metals)
Log into quickbooks at [1] In the upper right hand corner, there are 4 accounts: Savings, Checking, PayPal, and PEX. Select Checking select Recognized

6 KB (698 words) - 06:00, 18 January 2015
Things that get Member Points (section Cold Metals)
All Member Points awarded are at the discretion of the Board of Directors, but they are generally nice people that want to see the space improved. To request

4 KB (595 words) - 15:18, 7 June 2019
Hammond Grinder
Page - https://wiki.pumpingstationone.org/Hammond_Grinder Sponsor - Cold Metals Host - Jim Brink Date Published mailing list - 2/28/18 Suggested Method

1 KB (77 words) - 19:57, 7 December 2022
Vote to rework membership points (section Cold Metals)
User:hef User:ekoprucki User:rdpierce Unofficial Announcement - 2014-11-18 Official Announcement - 2014-12-02 To be voted on - 2014-12-09 There are several

6 KB (832 words) - 07:40, 24 December 2014
Jalenko Burn-out Furnace
Jalenko Burn-out Furnace Area: Hot Metals https://ps1.mywikis.wiki/wiki/Jalenko_Burn-out_Furnace {{#subobject: |Has value=$70 }} Ensure that burn out tray

2 KB (230 words) - 13:17, 8 May 2023
Meeting Notes 2017-06-06 (section Small Metals)
Lots of stuff in the woodshop have been ticketed Please do not leave things in the way of doors - even sliding doors. Daron is going to make some signs

2 KB (216 words) - 01:40, 7 June 2017
Meeting Notes 2017-07-18 (section Small Metals)
Intro to PS1 and what we're about. (2 mins MAX) Tour leaves (new people) Update from the BoD about what's going Update from area hosts about what's going

2 KB (350 words) - 01:48, 19 July 2017
Jewelry Area
Small Metals Hosted Area is sometimes referred to as "Jewelry" and has a wiki page here: https://wiki.pumpingstationone.org/Category:Small_Metals Other

243 bytes (35 words) - 00:51, 19 September 2018
Meeting Notes 2013-10-01
has been awesome? Call them out now. Any questions? Ventilation for Hot Metals Area Vote Adam will give official tour (make sure liability forms have been

1 KB (197 words) - 20:59, 29 March 2014
Meeting Notes 2018-10-23
cone 10 kiln donated on Thursday, it's going in hot metals The roofer is adding more holes to small metals and the wood shop Kattni is doing a electronics

2 KB (238 words) - 03:25, 10 December 2021
CashBoxCollection
2 CNC ___________ 3 Kitchen ___________ 4 Hot Metals ___________ 5 Cold Metals ___________ 6 Small Metals ___________ 7 Electronics __________ Total ___________

1 KB (225 words) - 04:19, 10 February 2019
Temporary 2018 Area Host Budget
following areas: CNC Area Cold Metals Electronics Area General Area Graphics Arts and Textiles Hot Metals Area Kitchen Area Small Metals Area Woodshop Area The

1 KB (157 words) - 01:27, 7 February 2018
Board Meeting Notes 2014-07-22
Mail Garbage Garbage Mail for Patrick Uline Receipt Receipts from Sheet metals McMaster receipt for Fitter Dave Electric Membership Report Full: 91 Starving:

1 KB (185 words) - 05:00, 31 July 2014
Vote to Fund Space Expansion Buildout
ventilation duct and add hood for hot metals. $400 Electrical Install new power outlets for woodworking, cold metals and hot metals. Materials: conduit, wire, outlets

5 KB (732 words) - 02:27, 20 July 2016
Meeting Notes 2016-08-09
scrap metal unless it is actual sheet metal useful for welding etc.. Please no more random things that are metal or metal-ish donated in hot metals. In general:

4 KB (617 words) - 01:51, 10 August 2016
Meeting Notes 2013-11-26
Tucker and Z and mill crew for mill! Fitter Dave for helping order the hot metals area. Skilton and Kevin for sink setup. Announced events December 9th-15th

2 KB (263 words) - 21:00, 29 March 2014
Meeting Notes 2014-03-11
14th Wednesday (7pm), Thursday(7pm) and Saturday(11:30am) - Tier 1 Cold Metals Authorizations 3 people per session - Email Ed Saturday, March 29 - SEM

2 KB (259 words) - 21:03, 29 March 2014
BOSS LS-3655 150w Laser Engraver
corners of your material Conductive materials such as aluminum and other metals, carbon fiber materials, mirrored acrylic, carbon-filled materials, etc

17 KB (2,259 words) - 01:09, 1 February 2024
Board Meeting Notes 2016-09-06
reflecting request for a Small Metals Area to be created. Map Draft 3.0 Interim map with formal creation of a Small Metals Area position. https://wiki.pumpingstationone

9 KB (1,258 words) - 03:04, 9 March 2017
Temporary 2020 Area Host Budget
Area Laser Area Cold Metals Area Electronics Area General Area Graphics Arts and Textiles Hot Metals Area Kitchen Area Small Metals Area Woodshop Area Office

2 KB (226 words) - 03:51, 8 January 2020
Meeting Notes 2017-09-05
taking place Returning Area Hosts Aushra - small metals Erik Wessing - general Ron Olson - hot metals Eric Beauchamp - woodshop Shellie Lewis - graphic

1 KB (186 words) - 01:29, 6 September 2017
Dumpster
Dumpster is locked and keys are in loading dock by door switch and/or in cold metals under watchful eye of the patron saint sister picture. the dumpster is kept

1 KB (181 words) - 00:54, 15 September 2022
Temporary 2019 Area Host Budget
following areas: CNC Area Cold Metals Electronics Area General Area Graphics Arts and Textiles Hot Metals Area Kitchen Area Small Metals Area Woodshop Area The

2 KB (224 words) - 05:56, 27 December 2018
Vote To Buy a Fume Extractor
Officially Proposed: 10/12/23 To be Voted on: 10/17/23 The air quality in Hot Metals sucks. When folks are welding you can generally smell it before you see

2 KB (276 words) - 05:57, 13 October 2023
Board Meeting Notes 2014-06-17
Shellie remains CNC Elizabeth remains Hot Metals Tom remains Wood Triano remains Cold Metals Dean is our new cold metals host Electronics Anna remains our electronics

1 KB (172 words) - 05:10, 20 June 2014
Meeting Notes 2017-03-28
Electronics, Cold Metals, NERP Simon - Secretary - Notes and things Rpi & audio this week Lyn - 24 Hour Party Person Aushra - Small Metals that are Small

4 KB (614 words) - 02:39, 29 March 2017
Board Meeting Notes 2017-04-04 (section Need new woodshop authorizer & hot metals authorizer)
Business account registration for PEX spenders. ( Start process for a new hot metal authorizer Old business Reports from Committees Chase Checking: $95,522.10

3 KB (371 words) - 00:54, 5 April 2017
Grizzly Mill
WIKI Page - https://wiki.pumpingstationone.org/Grizzly_Mill Sponsor - Cold Metals Host - Jim Brink Date Published mailing list - 2/28/18 Suggested Method

2 KB (138 words) - 20:25, 4 July 2018
Meeting Notes 2015-03-24
empty position) Hot Metals Volunteer Authorizer - appointed Simon Cygielski a (who will replace Jabu Dawdu who is stepping down) Cold Metals Volunteer Authorizer

2 KB (298 words) - 13:11, 25 March 2015
Meeting Notes 2017-03-21
makes stupid things Ron - Hot Metals Area Host - in charge of welders, forge, fire, danger, Aushra - Small (nonferrous) Metals Area Host - smaller dangerous

5 KB (688 words) - 05:24, 22 March 2017
Vote for funds to compelete sprawl
outlets and cabling for cold metals Kitchen wall/oven installation materials Hose/cord reels for general area,woodshop,hot metals New backdoor with RFID reader

804 bytes (106 words) - 22:47, 21 March 2017
Meeting Notes 2016-12-20
Michael - Director at large Jennie - Vice President Ron - Hot Metals Area Host Aushra - Small Metals Area Host Gerald and Shelly - Kitchen Area Host Erik - General

6 KB (1,044 words) - 03:32, 21 December 2016
Meeting Notes 2016-11-15
Electronics Area Host Ron - Hot Metals Area Host Gerald - Kitchen Area Host Shellie - Arts and Crafts Area Host Aushra - Small Metals Area Host Erik - General

6 KB (806 words) - 03:14, 16 November 2016
Meeting Notes 2016-08-30
Purple and Wild Events Simon - Secretary Andrew - CNC Area Host Ron - Hot Metals Area Host Shellie - Art & Crafts Area Host Shelly - Kitchen Area Host by

5 KB (755 words) - 01:58, 31 August 2016
Board Meeting Notes 2021-07-06
next on the list for replacement bulbs. - Jim, Cold Metals Endorsing Wally Fugiel for cold metals authoirzer TECH TEAM: - Documentation of existing systems

3 KB (456 words) - 21:46, 17 August 2021
Board Meeting Notes 2014-05-06
page for more details; have mold specialist Ed Chambers who can assist. Hot Metals area host. Area host debit cards - Pex. $50 fee to open account - we get

2 KB (342 words) - 01:04, 7 May 2014
Member Notes 2020-01-07
in Budget is in progress please give input on it Hot Metals Toolbox has been moved in Hot Metals to the Temporary Projects Vacuum former, do we want to

2 KB (327 words) - 16:30, 27 November 2020
Board Meeting Notes 2017-09-05
reinstate returning area host. Passed. Aushra - small metals Erik Wessing - general Ron Olson - hot metals Eric Beauchamp - woodshop Shellie Lewis - graphic

2 KB (241 words) - 23:43, 19 September 2017
Supplemental Budget Vote 2022
bringing this vote to the membership is the Hot Metals area. Due to higher cost of area maintenance Hot Metals is in need of immediate funds in order to continue

4 KB (569 words) - 02:19, 16 November 2022
Board Meeting Notes 2016-01-05
queue New business Vote to replace Hot Metals Authorizer. Justin (talk) 10:25, 5 January 2016 (CST) Hot Metals authorizer hasn't been doing any authorizer

4 KB (568 words) - 02:56, 6 January 2016
Vote to Renovate Kitchen v2
once slotted to be the small metals area, is now officially general area space, and is now being occupied by cold metals? More convenient access from kitchen

4 KB (735 words) - 19:20, 31 July 2017
Oxy-Acetylene Torch
Oxy-Acetylene Torch --Rtystgeeke (talk) 23:44, 2 March 2016 (CST) Area: Hot Metals https://ps1.mywikis.wiki/wiki/Oxy-Acetylene_Torch {{#subobject: |Has value=$999

903 bytes (65 words) - 16:52, 16 August 2017
Board Meeting Notes 2018-01-16
checks. See: ID_Checkers. Thanks McTavish! Small metals authorizer Board votes to make Ella a small metals authorizer Board meeting adjourns at 8:02

2 KB (285 words) - 01:17, 7 February 2018
Form3FormlabsSLAPrinterVote
creation of programming from Small Metals that will accompany this purchase. It will breathe excitement into 2 areas – Small Metals and 3D printing. What about

7 KB (1,164 words) - 23:45, 17 December 2019
Vote to Remove & Replace The Vacuum Former
3 welders at the same time, facilitate hot metals instruction, and allow greater flexibility in Hot Metals to meet the various needs of the area and its

4 KB (575 words) - 16:04, 17 March 2021
Board Meeting Notes 2020-02-04
team formation CTO Treasurer Read mail Old business WA/Stripe Issue Small Metals Decision Board Norms Previous Action Items Budget Refinement this weekend

4 KB (607 words) - 03:45, 5 February 2020
Meeting Notes 2016-07-26
Area Host Shellie - Crafts Area Host Gerald - Kitchen Area Host Ron - Hot Metals Area Host Move rubble from wall destruction in lounge 2.0 But only once

4 KB (651 words) - 01:44, 27 July 2016
Meeting Notes 2018-05-01
place Kitchen work day on Friday 5/4/2018 Equipment donation to Cold Metals Small Metals work this weekend A member is making lego circuit boards for the mini

1 KB (140 words) - 02:19, 2 May 2018
Jewelry Tools Vote
space. Initially, jewelry will be co-located with cold metals and be funded through the cold metals budget. In the future, it may be spun off as its own

2 KB (242 words) - 03:14, 27 January 2016
Board Meeting Notes 2016-12-20
handle point redemptions Cold Metals Authorizer JP removed as volunteer authorizer – Lyn to put up fliers for new cold metals authorizer Tool Cage Budget

3 KB (358 words) - 20:39, 21 December 2016
Board Meeting Notes 2023-04-04
Andrew W. Kitchen - Kitchwitch Small Metals - Ally R. Cold Metals - Jim B. / Dave S. Woodshop - Sam P. Hot Metals - Ron O. 2D Printing - Davis S. Arts

3 KB (357 words) - 00:45, 5 April 2023
Board Meeting Notes 2023-10-03
Cold Metals Area Host. For 5 / Against 0 / Abstain 0 The Board of Directors Votes to appoint Jim Brink to a WILD volunteer position in Cold Metals as Area

3 KB (398 words) - 01:41, 8 November 2023
Board Meeting Notes 2015-03-24
empty position) Hot Metals Volunteer Authorizer - appointed Simon Cygielski (who will replace Jabu Dawdu who is stepping down) Cold Metals Volunteer Authorizer

3 KB (481 words) - 01:24, 25 March 2015
Tool Status
Changes Edit these only if number of columns increase. Woodshop Hot Metals Cold Metals Lasers/3dPrinters Thank you to Ron and the team. PS we’re already

2 KB (354 words) - 02:25, 19 June 2021
Meeting Notes 2018-12-04
casts from 3D prints Notcher and bender has been moved from hot metals to cold metals Nine people have been authorized on the Tormach so far New web store

1 KB (168 words) - 02:36, 5 December 2018
CNC Plasma Cutter Vote V2
(especially for wood and soft metals). To round out our capabilities we'd like to propose CNC cutting of large sheet metal and plate. Adding a CNC plasma

1 KB (241 words) - 02:10, 6 July 2016
Meeting Notes 2018-03-20
Small Metals Aushra A. will also be getting a 20 ton hydraulic cylinder Member engagement and space stewardship Bhairavi S. is doing a Small Metals workshop

1 KB (166 words) - 01:55, 21 March 2018
2016 Short Term Area Budgets Vote
Area January 2016 Electronics $250 Woodworking $250 CNC $250 Cold Metals $250 Hot Metals $250 Arts $250 Kitchen $250 Tool Cage $250 General $250

2 KB (184 words) - 15:41, 29 December 2015
Emergency lights
lights to only those that are Chicago Approved. In the main that meant: metal box, two halogen lights, battery backup. Beyond that, the amount of light

8 KB (825 words) - 01:13, 20 October 2021
Meeting Notes 2014-04-01
Patrick McCarthy! Come make some furbies scary. Ed is doing a Tier 1 cold metals authorization Saturday. Ed would like some presenters for NERP. If you've

3 KB (477 words) - 01:51, 2 April 2014
Meeting Notes 2016-08-16
remembered Ron is going to be out of town until next Monday, so if you need metals supplies, let him know, but there might be a lag August 30 is the 5th Tuesday

3 KB (354 words) - 02:12, 17 August 2016
Air Conditioner Replacement
mid-2020, the air conditioner serving the 3519 side of the building (Cold Metals/General) stopped cooling due to refrigerant leaks, and while it was recharged

3 KB (491 words) - 01:00, 5 May 2021
Meeting Notes 2014-06-17
hosts. New area hosts! Art is shellie CNC is elizabeth Hot metals is Tom Wood is triano Cold metals is now hosted by dean Tool Cage is now hosted by Sevin

3 KB (545 words) - 01:55, 18 June 2014
Meeting Notes 2015-02-10
members/visitors introduce themselves. Introduce the Board and Area Hosts. Hot Metals and Tool Cage Area Host positions opened. Deadline for applications is 1

2 KB (232 words) - 02:23, 11 February 2015
Acetone
acetone. Acetone should be stored in the flamables cabinet in the Small Metals area.

468 bytes (75 words) - 20:30, 5 December 2018
Board Meeting Notes 2017-09-19
McTavish would like a larger role in cold metals Member points Canvas Vote to make McTavish McCardle a cold metals volunteer authorizer (Passed, 5-0) Member

1 KB (119 words) - 00:51, 20 September 2017
2018 Budget Vote
Worksheet 2018 Hot Metals Area Budget Vote -$8,000.00 Worksheet 2018 Kitchen Area Budget Vote -$3,500.00 Worksheet 2018 Small Metals Area Budget Vote -$8

6 KB (394 words) - 17:53, 25 January 2018
Beer Church
Station: One equipment) Wort Chiller Coil (Ryan Pierce) Box of Stuff, inc. metal bottle filler, hydrometer, conditioning chemicals, thermometers (Ryan Pierce)

6 KB (971 words) - 22:18, 23 August 2022
Meeting Notes 2017-01-17
Host Ron | Hot Metals Area Host Erik | General Area Host Shellie | Arts & Crafts & Textiles & Digital Media Area Host Dean | Cold Metals Area Host Systems

6 KB (923 words) - 01:52, 25 January 2017
Board Meeting Notes 2021-11-02
Purchase batteries for the emergency lights and replace broken light in hot metals. Emergency light in general area is mounted upside down; will reorient.

2 KB (155 words) - 00:19, 17 November 2021
Meeting Notes 2017-09-26
(Want to help? Contact Andrew C.) Small Metals: Aushra: Weekend after next, Sheetrock on shed in small metals and then hood and ducting for ventilation

2 KB (265 words) - 01:29, 27 September 2017
2015 Budget Vote/FY2015 Master Budget
Administrative Office Of The CTO General Area CNC Electronics Cold Metals Hot Metals Kitchen Tool Cage Arts & Crafts Woodshop Votes Total Savings Goals

3 KB (9 words) - 19:09, 10 April 2018
Board Meeting Notes 2016-11-01
spending should be individual votes Vote to name Aushra as official small metals area host passes Board planning 2017 Invite members to future meetings,

3 KB (413 words) - 23:51, 15 November 2016
Meeting Notes 2016-10-04
Kitchen buildout budget Small metals budget Ring workshop for making spinner rings Sunday afternoon 1-5 pm in small metals (post 24 hour work day!) Future

4 KB (637 words) - 16:57, 8 October 2016
Ryobi Pressure Washer 1600psi
wand's body. Be sure it is in correctly. Drag the hose from by the small metals sink outside. Bring the pressure washer outside as well. Check that the

2 KB (320 words) - 00:23, 20 May 2018
Laguna 16" Planer
can ruin the blades. If you're not sure, check the entire piece with the metal detector sitting on the table saw. Always measure the thickness of your work

3 KB (368 words) - 18:17, 27 May 2023
Board Meeting Notes 2019-11-19
where you sign on the dotted line. Small Metals Team - Lounge, Casting, Area Hosts. Kathryn wants to be Small Metals Lounge Area Host - which would cover the

4 KB (606 words) - 01:08, 18 December 2019
Main Page Draft 2024
Woodshop Info Electronics Info, Events Arts Info Hot Metals Info, Events Cold Metals Info Small Metals Info Kitchen Info But wait, there's more! (someone

6 KB (0 words) - 16:33, 7 March 2024
Diacro No3 bender
Bender is a rotary bender capable of rapidly bending mild steel and softer metals into a variety of shapes. The machine uses a lever arm with a forming nose

2 KB (245 words) - 19:33, 28 August 2018
Meeting Notes 2017-12-05
competition - need volunteers to help kids. Check the Google Group. Small Metals New forming tools! Stakes and hammers and casting equipment oh my. PS1 folks

2 KB (360 words) - 02:58, 6 December 2017
Boiler Room Inventory
be stored on top of the main circuit breakers near the back door to cold metals 3x 100A 250V Class RK5 70A 250V unclassified fuse 3x 600A 250V Class RK5

520 bytes (101 words) - 23:43, 26 March 2019
Deckel KF2 Universal Copy Mill
part out of softer materials like wood or plastic, and copy the part into metals including Brass Aluminum, and (with some extra work) steel. While the machine

3 KB (447 words) - 19:32, 28 August 2018
Epilog 30w Mini 24 Laser Engraver
cut up to 1/4" thick materials successfully. No laser owned by PS1 can cut metals. See main article, Epilog techniques. Epilog Laser settings for various

23 KB (2,485 words) - 12:21, 2 May 2021
Front-Loading Kiln Vote 2024
up better to the abuse a makerspace inevitably puts on equipment. Small metals currently has three small kilns. Up to two of them could be removed and

4 KB (724 words) - 04:20, 12 March 2024
Meeting Notes 2016-07-19
Area Host Anna - Electronics Area Host Andrew - CNC Area Host Ron - Hot Metals Area Host Empty the dust collector and check the auxiliary bin too! Take

5 KB (725 words) - 02:19, 20 July 2016
Board Meeting Notes 2016-02-02
Member leaving reason reports Check RT queue New business Select new Hot Metals Volunteer Authorizer. Justin (talk) 09:22, 30 January 2016 (CST) Respond

9 KB (1,190 words) - 17:45, 16 February 2016
2014 Votes
Proposal Kevin Caughlin 24 4 3 33 No Meeting Notes 2014-03-18 2014-03-18 Cold Metals Tool Cabinet Reimbursement Everett Wilson 42 0 1 33 Yes Meeting Notes 2014-03-25

4 KB (18 words) - 13:59, 27 April 2015
Board Meeting Notes 2016-10-18
the wall, most of electrical has been run for hot metals, most of electrical for area is done, Hot Metals can move in, CNC will be done tonight, Woodshop

3 KB (306 words) - 02:06, 19 October 2016
Board Meeting Notes 2020-07-21
solution for restoring air conditioning will not be put up for a vote. Cold Metals air conditioning solution: Tanja to get outstanding contractor questions

3 KB (425 words) - 22:56, 27 July 2020
Meeting Notes 2016-12-27
Tickets for the project storage stuff that's been abandoned in the old hot metals space Cables for projector need cleaning up Michael for door work Everybody

2 KB (283 words) - 02:22, 28 December 2016
Board Meeting Notes 2022-03-01
ON TOILET PAPER Close to getting ready for the area move (swap hot metals, cold metals, general area) Investigating electrical and air requirements Taking

2 KB (243 words) - 20:07, 19 May 2022
Meeting Notes 2017-04-18
space and tools, making a chandelier out of bike drop bars Ben - small metals, metals, woodworking Zack - industrial design student Marco - toolmaker, interested

5 KB (787 words) - 02:15, 19 April 2017
Meeting Notes 2016-06-28
- PR director Simon - Secretary Anna - Electronics Area Host Dean - Cold Metals Area Host Andrew - CNC Area Host Erik - General Area Host Take out the trash

5 KB (735 words) - 02:01, 29 June 2016
Meeting Notes 2016-11-01
wood and hot metal - member for 3 years Ron - Hot Metals Area Host Anna - Electronics Area Host Erik - General Area Host Aushra - Small Metals Area Host and

5 KB (759 words) - 02:11, 2 November 2016
Meeting Notes 2016-09-20
through Google | fusing glass and metal, and other dangerous and hot techniques | member for five months | new hot metals volunteer authorizers Andy L. |

5 KB (745 words) - 13:56, 22 September 2016
Meeting Notes 2016-05-03
Hot Metals Area Host Electric for compressor needs to be taken care of - and will be tonight Lubrication system for horizontal mill in cold metals needs

5 KB (816 words) - 01:48, 4 May 2016
Meeting Notes 2017-01-10
Wikignomes - Saturday at 1 pm Small Metals Office Hours, Sunday: all things nonferrous and of moderate Tier One Cold Metals authorization happens Saturday at

5 KB (738 words) - 02:06, 18 January 2017
Ironworking Station
shearing and bending operations to be performed in mild steel bar (or softer metals). Within their intended use range, these tools will make faster cleaner

4 KB (631 words) - 19:30, 28 August 2018
Meeting Notes 2017-04-11
from game night has offered to hook up the new sink (in old hot metals / new small metals) next week - so we need to turn off the water and move the new

3 KB (404 words) - 02:02, 12 April 2017
Meeting Notes 2017-05-09
- DIrector at Large Simon Ray Anna - ELectronics Lab Area Host Ron - hot metals area host Erik - General Area Host Matt - Mario Kart Area Host Lyn - Events

3 KB (403 words) - 01:21, 10 May 2017
Board Meeting Notes 2023-11-07
space, was evicted. Dave has given it temporary permission to be in Cold Metals while it gets reduced in size. Joe asks if it is a loaned tool or a donated

3 KB (412 words) - 01:41, 8 November 2023
Board Meeting Notes 2015-01-27
who's on record as secretary of the org Area host applications Open up hot metals and tool cage - 1-2 weeks for apps Mail read - ComEd bill Financial report

3 KB (466 words) - 02:12, 4 February 2015
Board Meeting Notes 2019-08-06
Freshdesk ticket pertaining to parking Addl Cameras for space? 2 in Hot Metals ($85 each) 1 outside ($160) $330 total Old business Meeting notes summary

3 KB (401 words) - 23:53, 20 August 2019
Meeting Notes 2017-04-25
Ray - PR Director Anna - Electronics Area Host Ron - Hot Metals Area Host Aushra - Small Metals Area Host Matt - CNC Area Host Tool organization! Andrew

3 KB (406 words) - 03:12, 26 April 2017
Meeting Notes 2015-12-15
woodshop, dabbled in other places - co-worker Paul Mance Everett - machine shop metals, crappy forging, - hackerspaces in other states Dean - fix dripping faucets

3 KB (400 words) - 02:33, 16 December 2015
Meeting Notes 2017-05-16
software on a USB stick that one needs to install. [Saleae_Logic_Analyzer] Hot Metals New MIG Welder - if you are authorized on any of the old MIG welders, you

3 KB (510 words) - 01:03, 24 May 2017
Shopmon
going on this second (actually every few seconds) “LOOK, someone is in Small metals"! (hey, its all anonymous, it just counts moving warm bodies) PS1 ShopMon

1 KB (206 words) - 17:32, 30 April 2022
Sharpie DX Tungsten Grinder
Grinder Arrival Date October, 2015 Usability yes Contact Ron Olson Where Hot Metals Area Authorization Needed yes Hackable no Estimated Value $400 Host Area

395 bytes (35 words) - 21:24, 9 October 2015
2019 Woodshop Dust Collection Vote
machinery. The dust meter in Hot Metals has frequently been read far above the OSHA PEL- for members who use Hot Metals and the Woodshop frequently, the

11 KB (1,788 words) - 23:37, 17 December 2019
Meeting Notes 2016-05-31
make/hack) Laurel | Welder, likes to make things with metal, lamps, functional things, mixing metals, steel, copper, aluminum, etc. | learned about from

6 KB (885 words) - 02:00, 1 June 2016
Board Meeting Notes 2017-01-17
request Cold metals authorizer selection Dean asks to fill one position tonight, fill second position later Todd is chosen as cold metal volunteer authorizer

3 KB (404 words) - 02:59, 31 January 2017
Board Meeting Notes 2022-10-18
page can be found at Budget Balance Hot Metals is running out of budget, there will be a vote run by the Hot Metals Area Host to increase the budget. He spent

3 KB (427 words) - 00:48, 19 October 2022
CNC Milling Machine Vote
Elizabeth Koprucki, CNC Area Host Dean Anderson, Cold Metals Area Host Announced: 11/11/2014 Language lockdown: 11/11/2014 Vote date: 11/18/2014 Yes: 41

4 KB (544 words) - 07:28, 24 December 2014
Board Meeting Notes 2020-10-06
* Andrew to contact ABT to see how soon we can get these b. fixing cold metals fresh air intake * Andew to get estimates c. Gary Newhouse taking time away

3 KB (391 words) - 22:46, 28 December 2020
Board Meeting Notes 2021-03-16
under $4,000. Smoke detection and heat detection will be used in wood and metals, and pull station at exits. Horns and strobes through the space will alert

3 KB (430 words) - 04:00, 17 March 2021
Meeting Notes 2017-04-04
woodshop - just needs to be done! Scrap metal bin in hot metals has wheels - but they're insufficient for the amount of metal in the barrel. Put some (sturdier)

4 KB (483 words) - 01:55, 5 April 2017
Meeting Notes 2016-03-22
- woodworking, small metal working, painting, sculptures of humanoids Justin - President Jennie P - Vice President Ron - Hot Metals Area Host Simon - Secretary

3 KB (484 words) - 01:56, 23 March 2016
Board Meeting Notes 2015-05-05
Dean from CNC vote. Paid. 2691 - Reimburse Everett for pin gauges from Cold Metals budget. Paid. 2683 - Reimburse Jason for laser tube return. Paid. 2586 -

4 KB (613 words) - 01:00, 6 May 2015
Board Meeting Notes 2015-05-12
2727, 2728 - Reimburse Ron for Hot Metals area expenses. Done. 2733 - Reimburse Dean for band saw blades from Cold Metals budget. 2736 - Purchase request

4 KB (559 words) - 00:52, 13 May 2015
2014 Budget Vote
Area Amount Electronics $4,250 Woodworking $3,850 CNC $3,000 Cold Metals $3,000 Hot Metals $3,447 Arts $3,000 Kitchen $3,000 Tool Cage $3,000 General $500

5 KB (424 words) - 01:33, 16 April 2014
Board Meeting Notes 2019-02-19
laser cutting study - ok with this? Discuss briefly ventilation for Small Metals & Spray Booth; and installing air quality monitors in the space. Door code

5 KB (451 words) - 05:43, 4 March 2019
Meeting Notes 2016-12-13
Purple and Wild Events Ron | Hot Metals Area Host Shellie | Arts & Crafts & Textiles Area Host Aushra | Small Metals Area Host Anna | Electronics Area

4 KB (514 words) - 03:08, 14 December 2016
Shopbot PRS CNC router
cutout will just create a lot of mess. ShopBot should not be used for... Metals Cutting anything that requires coolant or lubricant (it will ruin the waste

30 KB (2,694 words) - 14:12, 4 July 2023
Central Pneumatic HVLP Spray Gun Kit
Campbell-Hausfeld air dessicant/regulator (not the oiler) available in Hot Metals to help keep application clean and consistent. Authorization required. Talk

584 bytes (63 words) - 00:47, 26 September 2022
Nikon H-14A Optical Comparator
https://wiki.pumpingstationone.org/Nikon_H-14A_Optical_Comparator Sponsor - Cold Metals Host - Jim Brink Date Published mailing list - Suggested Method of disposal

1 KB (79 words) - 20:52, 11 June 2018
Equipment Label Example
Examples: hostarea=CNC or hostarea=General or hostarea=Kitchen or hostarea=Cold Metals There are 9 currently valid Hosted Area names. Could someone please add

4 KB (642 words) - 20:01, 12 January 2018
Ridgid Oscillating Spindle Sander
for nails or staples. If you're not sure, check the entire piece with the metal detector or a magnet. Always use dust collection. Always use the appropriate

6 KB (200 words) - 00:13, 12 August 2021
CNC Mill Vote 2017
and cold metals area hosts in formulating authorization plans that will work for PS1. If more than 4 individuals volunteer, the CNC and cold metals area hosts

11 KB (1,819 words) - 02:43, 7 February 2018
Board Meeting Notes 2016-10-04
talk to Aushra about Small Metals Area Host position Ray (and Jennie) will advertise the position of full-time small metals host Simon to handle redeeming

5 KB (471 words) - 17:09, 8 October 2016
Meeting Notes 2017-09-19
authorizations forthcoming! Awesome callouts Aushra and Casey cleaned up small metals Anna helped get the Form 1 printers and get them working Two votes in the

805 bytes (94 words) - 01:17, 20 September 2017
Vote to sell nikon optical comparator
Voted on: TBD We have an optical comparator that was purchased by the cold metals area host in October 2016, rt ticket 5546 has the receipt in it. I have

694 bytes (105 words) - 16:38, 2 May 2017
Meeting Notes 2015-05-19
themselves. Introduce the Board and Area Hosts. Thursday, May 28, 7 PM - Cold Metals Tier 1 authorization, sign up on the mailing list. July 4th weekend - Anime

1 KB (142 words) - 01:16, 20 May 2015
Board Meeting Notes 2020-08-18
storm damage, it may be able to be written off, insurance is contacted. Cold metals may be still working, testing to be done. Member storage is being reviewed

1,021 bytes (134 words) - 13:33, 25 August 2020
Library Wishlist
more useful than the latest, and cheaper. There is an old edition in the metals area, by the mill. Machinist's Bedside Reader (3 volumes) Mastering the

1 KB (194 words) - 00:15, 18 March 2014
Meeting Notes 2018-05-15
place Please send member survey ideas to [email protected] Small metals renovation is progressing with new insulation and new dry walls. Acetylene

838 bytes (98 words) - 01:58, 16 May 2018
How can I help
days : There is still much to be done to finish with the expansion. CNC, Hot Metals, and Wood all need a hand. CNC plasma cutter : We finally have all the parts

9 KB (1,453 words) - 07:42, 1 December 2022
Machine Shop Wishlist
and other metal marking tools Mirrors on sticks Telescoping gages Caliper batteries Deburring tool Power drawbar Surface grinder Sheet metal sheer Sheet

570 bytes (61 words) - 19:11, 31 October 2015
Board Meeting Notes 2017-01-03
location of small metals, but does include the new woodshop location Let's vote at the next meeting on a map with the new small metals location included

5 KB (624 words) - 16:53, 5 January 2017
Board Meeting Notes 2015-08-04
Conroy Graphic Arts and Textiles: Shellie Lewis Hot Metals Shop: Ron Olson Kitchen: Arturo Duarte Metal Shop: Dean Anderson Wood Shop: Matt Triano Tool Cage:

5 KB (720 words) - 23:12, 11 August 2015
Board Meeting Notes 2020-01-21
complete, need board approval and to prepare application form New Small Metals area host needed Applicants have till next week Previous Action Items Budget

5 KB (618 words) - 02:18, 22 January 2020
Tool Cage Proposal
be centrally located between Wood Shop and Cold Metals in space currently taken up by three large metal shelve units. It is going to measure seven feet

5 KB (779 words) - 01:07, 12 May 2014
Meeting Notes 2015-05-26
themselves. Introduce the Board and Area Hosts. Thursday, May 28, 7 PM - Cold Metals Tier 1 authorization, sign up on the mailing list. Mohammed wants to teach

1 KB (177 words) - 03:44, 29 May 2015
Meeting Notes 2019-02-05
New Signage Hot Metals Tool Grinder in Woodsho Label tools First Tormach Auth Elkgrove Village Public Library Maker Space Maker Day Sun April 7 Show off

1 KB (142 words) - 02:59, 6 February 2019
Vote to make PS1 cold again
Plasterer Mailing List Announcement: 2020-7-18 Cancelled: 2020-7-31 AC in cold metals was fixed by the board, exercising power to repair infrastructure. It's

1 KB (189 words) - 15:52, 31 July 2020
Board Meeting Notes 2020-05-05
google.com/drive/folders/1aLDgk99MhxiSXBfaf-7ODSR58-j-Iftj?usp=sharing Small metals volunteer authorizer Mike’s request from Feb 25: https://pumpingstationone

991 bytes (116 words) - 23:55, 7 July 2020
Meeting Notes 2018-04-10
are getting a bunch of equipment donations We have sheetrock for the small metals area, we need help moving things and installation on Sundays Video Game

998 bytes (135 words) - 02:20, 11 April 2018
Meeting Notes 2015-02-03
members/visitors introduce themselves. Introduce the Board and Area Hosts. Hot Metals and Tool Cage Area Host positions opened. Deadline for applications is 2

1 KB (176 words) - 02:27, 4 February 2015
Board Meeting Notes 2022-04-19
send social folder to Alicia Jim Brink needs help gaining access to cold metals email, or setting up a forwarder President implementing board reports -

1 KB (127 words) - 20:04, 19 May 2022
Meeting Notes 2018-11-13
octoprint on all the printers Aushra is doing an etching project in small metals with a new member The votes about quorum did not meet quorum Ian is 3D printing

974 bytes (130 words) - 02:39, 14 November 2018
Meeting Notes 2015-05-12
Hosts. Tonight - 300 Seconds of Fame! Wednesday, May 13, 7 PM Tier 1 Cold Metals authorizations. Wednesday, May 13, 7 PM Scanning Electron Microscope Office

1 KB (173 words) - 01:20, 13 May 2015
Meeting Notes 2020-01-28
Looks like we will buy a new tube, then increase power supply later Small Metals Accepting applications through Friday. Adult coloring in arts tomorrow.

948 bytes (105 words) - 02:33, 29 January 2020
Meeting Notes 2018-05-08
is taking place No summit this weekend, postponed to a later date Small metals is cleaned out and the dry wall will be replaced this weekend Birthday party

1 KB (144 words) - 02:02, 9 May 2018
Meeting Notes 2018-05-22
work is underway with a new electrician Small Metals renovation is moving along We got a new (to us) metal lathe, welder, and surface grinder CNC plasma

1,009 bytes (132 words) - 02:48, 23 May 2018
Area Host Meeting Notes 07-16-2013
rid of the tool cage by moving hot metals to the back left of the shop. We then place the tool cage inbetween metals and woodshop. Bounty board. Possible

8 KB (1,381 words) - 14:13, 17 March 2014
Meeting Notes 2016-06-21
Host Shae - Tool Cage Area Host Ron - Hot Metals Area Host Andrew - CNC Area Host Do your dishes! Hot Metals is the dirtiest part of the entire shop! Congratulations

5 KB (702 words) - 02:01, 22 June 2016
Board Meeting Notes 2016-06-21
79 PayPal: $10,215.33 Donation boxes: CNC: $57.06 Cold metals: $6.25 Electronics: $25 Hot Metals: $5 Check to Alison Stanton for $400 for Ally Skills Workshop

5 KB (693 words) - 03:15, 6 July 2016
Meeting Notes 2016-09-13
moving the huge pieces of metal out of a basement to here to make tables Michael Skilton for initiating making small metals its own area The unknown organizer

4 KB (632 words) - 01:51, 14 September 2016
Meeting Notes 2016-07-12
about PS1 from Adriana | programming for work, enjoying learning welding, metals, woodworking Justin - President Jennie - Vice President Lyn - Director at

5 KB (693 words) - 15:05, 2 September 2016
Meeting Notes 2018-06-19
Thursday 6/28 at 7pm Ideas for new smaller powder coating oven Chop saw in hot metals will be fixed or replaced soon Make Video Games workshop this Sunday 6/24

1 KB (184 words) - 02:02, 20 June 2018
Board Meeting Notes 2022-02-01
transactions Member leaving reason reports COVID Vote #2 D&I Position Hot Metals Donation Check Freshdesk queue New business Old business Reports from Committees

1,009 bytes (54 words) - 23:54, 1 February 2022
Meeting Notes 2018-07-17
tormach milled its first piece We're doing small powder coating pieces in Hot Metals Space time happy hour is this Thursday night at 7pm, check out the google

1 KB (170 words) - 01:39, 18 July 2018
Meeting Notes 2017-12-19
minors policy Still need to sign waiver forms! Working on budgets! Small metals - metal melter is working CNC - first Universal authorization is tonight IT

1 KB (186 words) - 02:43, 20 December 2017
Meeting Notes 2014-02-11
Announcements Who's been awesome? Skilton (predictably) for running power in hot metals. Kevin and Ryan helped! Bry talks about how often she takes out garbage

1 KB (192 words) - 15:18, 30 July 2014
Meeting Notes 2018-03-27
oven at the same time, it'll blow the fuse. Bhairavi talked about the small metals workshop she did last Saturday and it was good. Andrew C. talked about the

1 KB (163 words) - 01:46, 28 March 2018
Meeting Notes 2013-07-30
woodshop area host * Adrianna McKinley is now the area host of the new area hot metals Adam will give official tour (make sure liability forms have been signed

1 KB (201 words) - 20:57, 29 March 2014
Vote To Purchase English Wheel
remaining cost of the machine. The English Wheel shall be stored in the Cold Metals area until the area move takes place, at which point its placement shall

1 KB (161 words) - 00:53, 15 June 2022
CNC Plasma Cutter Authorization
for bringing your own metal sheet, something like: https://www.homedepot.com/p/Everbilt-24-in-x-24-in-16-Gauge-Plain-Sheet-Metal-800657/204604786. If you're

3 KB (514 words) - 15:46, 3 August 2018
Board Meeting Notes 2012-11-20
No one else has nominated themselves for metal shop areas host. The board voted to make Metal Mike the metal shop area host There is a Space Federation

3 KB (454 words) - 18:54, 29 March 2014
Meeting Notes 2016-06-14
President Lyn - Director at Purple Brian - Treasurer Simon - Secretary Ron - Hot metals area host Anna - Electronics area host Matt Triano - woodshop area host

5 KB (770 words) - 02:14, 15 June 2016
Meeting Notes 2015-12-29
very bad. Please cleanup after yourself in Hot Metals, OMG! Cleanup after yourself OMG!,there is metal dust that could ruin the Mig or Tig, from not cleaning

5 KB (766 words) - 04:04, 30 December 2015
Schultz air compressor
in the northeast corner of Hot Metals (3517). the second circuit (1" pipe) feeds the south shop (Woodhop and Hot Metals 3517) plus the loading dock / spray

5 KB (786 words) - 13:11, 2 July 2022
Board Meeting Notes 2022-01-18
requesting another authorizer Chris Iacullo for cold metals to do authorizations on the tube bending, sheet metal equipment and tier 1 tools. Let's add it to the

5 KB (751 words) - 15:11, 19 January 2022
Meeting Notes 2016-01-26
spent on? 2015 expenditures What are things spent on in different areas? Hot metals - mostly consumables CNC - mostly consumables, and some repair Tool cage

5 KB (755 words) - 03:36, 30 January 2016
Meeting Notes 2016-10-11
Events Simon - Secretary Ron - Hot Metals Area Host Anna - Electronics Area Host Erik - General Area Host Aushra - Small Metals Area Light in the kitchen is

5 KB (714 words) - 03:17, 12 October 2016
Meeting Notes 2014-09-16
code. Awesome Callouts Dean is in process of a major reorginization of cold metals! Jenny and Anthony and Justin went to the Mokena Maker Faire (and Derek

2 KB (255 words) - 01:02, 24 September 2014
Meeting Notes 2015-02-17
co-working at the space. New Area Hosts appointed: Ron Olson is the new Hot Metals Area Host. Michelle Deleon is the new Tool Cage Area Host. Announcing applications

2 KB (246 words) - 02:24, 18 February 2015
Meeting Notes 2018-06-26
is taking place New electrician is making progress around the space Hot Metals is actively removing unlabeled material Latest newsletter just went out

1 KB (210 words) - 01:49, 4 July 2018
Sheet Metal Brake (12in)
Number: 1 Make/Model: Sheet Metal Brake: 12" Arrival Date: March 2012 Usability: no Contact: Greg "Nerobro" Teiber Where: Cold Metals Certification Needed: no

1 KB (99 words) - 04:18, 19 January 2018
Meeting Notes 2019-03-05
Kaufmann March 13 Music Hacks Pi Day Alex Zhu making a metal bike side car More Casting in Small metals 3D Print in PLA 1-2" cubed pouring 60lbs of bronze

1 KB (192 words) - 03:14, 6 March 2019
Meeting Notes 2018-03-06
everyone to a future work day putting sheetrock and ventilation in Small Metals Joe is happy announce successful laser trainings recently Ron O. says the

1 KB (209 words) - 02:44, 7 March 2018
Meeting Notes 2015-03-17
speaker. This would likely be held in late April. Talk to Jenny Tong. Hot Metals volunteer authorizer position open. Applications due next Tuesday. Current

2 KB (244 words) - 01:31, 18 March 2015
Meeting Notes 2015-03-10
Shellie for helping hang up emergency lights. Todd for putting together cold metals Tier 1 authorization. Justin, Andy, Jenny, Ray, Arturo, for painting the

2 KB (277 words) - 01:48, 18 March 2015
Meeting Notes 2014-02-04
why the laser computer sucks. New members sent on tour. Bry announces Hot Metals Electrical vote, members vote. Meeting end: 20:20

2 KB (254 words) - 15:18, 30 July 2014
Board Meeting Notes 2015-02-03
point to Chris. 2076: 1 point to Justin. Area host applications for Hot Metals and Tool Cage will be open for 2 weeks. Ryan will send out notification

2 KB (236 words) - 01:02, 11 February 2015
Meeting Notes 2019-05-07
copyrighted material Making flute out of campaign signs New stereo in hot metals Craft Fair in Pilsen Renegade craft faire https://www.renegadecraft.com/city/chicago

2 KB (249 words) - 01:50, 8 May 2019
Safety and Protective Equipment Policy Vote
following are true: At ALL times if you are in main shop (wood, hot metals, cold metals, etc) even if you are sitting at a computer, not using tools, or on

9 KB (1,504 words) - 20:27, 15 June 2016
Meeting Notes 2017-01-24
Jonathan - CTO Simon - Secretary Ray - PR Director Ron - Hot Metals Area Host Aushra - Small Metals Area Host Erik - General Area Host Anna - Electronics Area

6 KB (873 words) - 03:19, 25 January 2017
Board Meeting Notes 2021-01-05
scholarship recipients. - GenOps - Roofer is looking to fix leaks above cold metals tomorrow 1/6. Joe Mertz and Andrew Morris will communicate on slack to have

6 KB (911 words) - 04:25, 6 January 2021
Board Meeting Notes 2014-10-14
volunteer positions for authorizors: 4 positions as follows: Machine shop Hot Metals Wood Shop CNC These positions will receive a starving hacker membership

2 KB (248 words) - 00:56, 15 October 2014
Board Meeting Notes 2018-08-21
- june orientation ray - laser george shaw - organizing wrenches in cold metals skilton - blacksmithing Passed 6/6 airtable setup for various processes

2 KB (192 words) - 01:10, 22 August 2018
Central Machinery Pipe Notcher
There is a set of hole saws for this tool only, they can be used with wood, metal (aluminium and mild steel only) and plastic The notches are not perfect but

1 KB (229 words) - 21:38, 19 January 2019
Board Meeting Notes 2014-10-28
directors Volunteer positions! CNC: Andrew Camardella Machine Shop: Todd Hot Metals: Jabu Wood Shop: Ron Olson! Congrats everyone! How to motivate people to

2 KB (254 words) - 00:50, 29 October 2014
Board Meeting Notes 2014-08-26
Accidental email? RT #1000 - send money for purchase of items from cold metals budget #689 - Going through spending is still in progress #902 - waiting

2 KB (249 words) - 00:26, 27 August 2014
Meeting Notes 2018-02-27
tables to be more functional Ron O. made a new policy for Hot Metals to remove all scrape metal the Hitachi chop saw is up for sale Eric W. would have to know

2 KB (276 words) - 02:48, 28 February 2018
Board Meeting Notes 2018-01-02
votes to make Bhairavi and Marlena our new volunteer authorizers in Small Metals Touch base with Ash about applications for CNC Board member position descriptions

2 KB (186 words) - 02:11, 3 January 2018
2019 Tester Main Page
usage. 1st Floor 1. General Area(s) 2. CNC Area 3. Small Metals 4. Cold Metals 5. Hot Metals 6. Wood Shop 2nd Floor 7. Electronics 8. Graphic Arts & Textiles

5 KB (401 words) - 00:01, 28 January 2019
Board Meeting Notes 2018-06-19
for the stove Eliminating cold metal and woodshop extension cords The above are done The below are in progress Small metals Lounge General area waiting for

2 KB (200 words) - 00:50, 20 June 2018
Vote To Buy New Mig Welder (section Hot Metal Area Expenditures)
Ron Olson (Hot Metals Area Host) Mailing List Announcement: 4/17/2017 Officially Proposed: To be Voted on: 5/2/2017 Welding has steadily increased in importance

2 KB (295 words) - 01:49, 3 May 2017
Board Meeting Notes 2021-11-16
week. GENERAL OPERATIONS: Replace coupler for the heat pump on the cold metals side. Will examine oil leak at compressor. TECH TEAM: Canvas SSO integration

2 KB (170 words) - 01:13, 1 December 2021
Vote to purchase tool carts
one place. The carts to be purchased are the same as one currently in hot metals and can be purchased from Harbor Freight and cost $179. The alternate purpose

2 KB (368 words) - 04:11, 22 March 2017
MMT Meeting 6-11-2019
New Treasurer Liaison Thanks for your hard work! Redistribute dust to hot metals, thanks Ron! Joe: Share document of authorizers with Alex and Nick, Ask

2 KB (260 words) - 01:29, 19 June 2019
Meeting Notes 2016-05-17
us - what do you make/hack) Pat | works on metal | learned about us from metal shop Ashley | Ceramics, metal, wood, want to use laser cut | learned about

7 KB (995 words) - 02:08, 18 May 2016
Board Meeting Notes 2017-04-18
authorizers Approved 2 for CNC - Ash Jasani, Joseph Junkhe Approved 2 for Hot Metals - Tom Judge, Chris Iacullo Approved 2 for Woodshop - Paul Van Lake, Ralph

2 KB (251 words) - 20:51, 26 April 2017
Meeting Notes 2015-03-03
lightning talks. Sign up on the Wiki. Announcing applications for a second Cold Metals Volunteer Authorizer position. Closes in 1 week. Wood Shop Volunteer Authorizer

3 KB (376 words) - 02:45, 4 March 2015
Vote to buy a new blasting cabinet
Ron Olson (Hot Metals Area Host) Michael Skilton Mailing List Announcement: 1/18/2019 Officially Proposed: 1/18/2019 To be Voted on: 1/29/2019 With our

2 KB (310 words) - 03:20, 30 January 2019
Board Meeting Notes 2020-07-07
Morris to test capacitors, see if compressor is pumping refrigerant Cold metals HVAC - Tanja's contact believes compressor is bad - Andrew Morris to confirm

3 KB (388 words) - 04:42, 22 July 2020
Meeting Notes 2015-01-27
members/visitors introduce themselves. Introduce the board and area hosts. Hot Metals and Tool Cage Area Hosts are Open This Thursday at 7 PM we are having a

2 KB (359 words) - 23:05, 28 January 2015
Board Meeting Notes 2017-05-16
T, Able G - 1 pt each - Dean Anderson asking for points for work in cold metals 6911 - Burton Kent - 4pt - 21 people on the laser Consuming Points 6944

2 KB (246 words) - 01:02, 17 May 2017
Board Meeting Notes 2021-10-05
Larry M to install new light at the back of the utility room. A/C in cold metals continues to leak; will try to re-level. TECH TEAM: Resolved WF2WA sync

2 KB (212 words) - 00:13, 6 October 2021
Board Meeting Notes 2021-10-19
compressor to drain water. Will examine replacing the emergency light in hot metals. TECH TEAM: Resolved Canvas connection issue on Monday evening. Working

2 KB (241 words) - 00:27, 20 October 2021
2013 Votes
Denney 24 5 3 28 Meeting Notes 10-01-2013 9/19/2013 Ventilation for Hot Metals Area Vote Adrianna McKinley 27 1 0 28 Meeting Notes 10-15-2013 10/15/2013

4 KB (18 words) - 13:59, 27 April 2015
Meeting Notes 2014-10-07
contest has ended. Will's going to seek votes on the mailing list. Cold Metals Tier 1 is happening Thursday 7:00-8:30pm. Contact Ed. Everett doesn't care

2 KB (384 words) - 01:13, 8 October 2014
Vote to Explore New Locations for Pumping Station: One
chemicals without proper ventilation. The wood shop is right next to the hot metals area. These are all things that are a concern and their safety should be

2 KB (320 words) - 14:29, 14 March 2020
2015 Budget Vote
Budget Vote/Electronics Area Budget 2015 Budget Vote/Cold Metals Area Host 2015 Budget Vote/Hot Metals Area Host 2015 Budget Vote/Kitchen Area Budget 2015 Budget

9 KB (980 words) - 03:27, 21 January 2015
Board Meeting Notes 2020-06-16
will install on Wednesday Got an HVAC repair person to look at the cold metals ac unit, including the rooftop compressor; he will give us two quotes on

3 KB (456 words) - 04:44, 22 July 2020
Meeting Notes 2017-05-02
Area Hosts: Matt - CNC | Anna - Electronics | Erik - General | Ron - Hot Metals | Shelly - honorary Kitchen Area Host New People (name - where did you hear

3 KB (347 words) - 20:39, 5 May 2017
Board Meeting Notes 2015-04-28
payments, processed in QuickBook. 2614: PEX card transaction for Ron for hot metals. Asked for receipt from the vendor. 2617: Need to refund member $40 who

3 KB (408 words) - 01:20, 29 April 2015
Meeting Notes 2014-11-04
He lives precisely between us and SSH:C. Tom is the hot metals area host. He likes to fasten metal together. Also driving over things. Hef needs some help

3 KB (437 words) - 02:14, 5 November 2014
Board Meeting Notes 2015-03-10
Tom. 2327 - PEX card reload for Justin. Done. 2336 - Reimburse Ron for hot metals supplies. Done. 2336, 2335 - Need to refund Ron $160 in membership dues

3 KB (427 words) - 01:01, 11 March 2015
Meeting Notes 2015-11-10
Jenny Lyn Shae Ron Anna Dean Arturo Erik Ed - member for 5 years, NERP host, metals area, Art Institute Casey - wood electronics, a place to use a table saw

2 KB (322 words) - 06:57, 11 November 2015
Compressed Air System Updates
line location. Purchase two desiccant air dryers. One to be kept in hot metals, the other to be portable, for paint, and more sensitive air source usage

3 KB (485 words) - 03:47, 24 July 2014
Board Meeting Notes 2015-07-21
Available. RT 3115 - Reimburse Khoi for trash bags. 3097 - Reimburse Ron for metals area expenses. 2652 - Financial Report request. We urgently need to file

3 KB (384 words) - 01:00, 22 July 2015
Vote for Hand Woodworking Tools Purcahse
benefit from sturdy work surfaces and vices while teaching clinics. Small Metals has also voiced an interest in having sturdy benches and we would build

3 KB (443 words) - 15:14, 31 March 2017
Meeting Notes 2016-10-18
that uses (motor) 12 volts with rasp pi, what is the load? Quorum 51 Small Metals Budget Yay - 17 in favor in person Combined with proxy, 50 votes in favor

3 KB (335 words) - 02:35, 19 October 2016
Meeting Notes 2011-08-02
wants to learn electronics and metal and wood working. Matt just moved here from Seattle like to weld, solder, and metal working. Looking for a place to

1 KB (170 words) - 20:41, 29 March 2014
2019 Anti-Theft Budget Vote
to record in Hot Metals, which has not yet been installed. One interview subject disagreed with the decision to record in Hot Metals. A related vote changes

14 KB (2,199 words) - 23:04, 17 December 2019
Board Meeting Notes 2012-11-13
address update. We need to verify the code status of the fire door in the metal shop We need to improve our implementation of the tool certification process

4 KB (659 words) - 18:54, 29 March 2014
Board Meeting Notes 2012-11-19
address update. We need to verify the code status of the fire door in the metal shop We need to improve our implementation of the tool certification process

4 KB (649 words) - 18:54, 29 March 2014
Board Meeting Notes 2012-11-06
address update. We need to verify the code status of the fire door in the metal shop We need to improve our implementation of the tool certification process

4 KB (607 words) - 18:54, 29 March 2014
Board Meeting Notes 2016-08-02
for electronics $1 to CNC $5 to Cold Metals Comed, Rent, Waste Management, Adobe, Pagely, Cleaners Pending: Cold Metals Equipment Starving Hackers: 280 Full

8 KB (1,024 words) - 02:58, 3 August 2016
Meeting Notes 2017-02-28
repair Andrew - President Jonathan - CTO Ed - Director at Large Ron - Hot Metals Area Host Erik - General Area Host Lyn - Wild Events Anna - Electronics

3 KB (422 words) - 02:29, 1 March 2017
Meeting Notes 2014-06-10
prompts and fun story games. Come out to try writing. Ed is proposing Cold Metals Vertical Bandsaw Vote Pumping Station: Yum is Friday at 7pm. Planning meeting

3 KB (511 words) - 15:13, 30 July 2014
Meeting Notes 2016-03-01
Secretary Lyn - Director at Purple Michael - Director At Large Ron - Hot Metals Area Host Lyn - joined to use 3d printers, ended up uslikes to do arts &

3 KB (373 words) - 05:51, 2 March 2016
Board Meeting Notes 2014-06-03
"Bllpppplppp" RT Welding supplies reimbursement Reimburse Darin Wike $54.58 for hot metals supplies. Anthony Sontag reimbursement Reimbursed by the generosity of members

3 KB (492 words) - 15:02, 30 July 2014
Expansion Punch List
ducting for Woodshop dust collection. Install dust collector. Install Hot Metals ventilation. We need AC. Details to follow. Walls are being torn down. We

2 KB (364 words) - 01:16, 3 August 2016
Swag Heavy Duty Break
Offroad HD Break Arrival Date Yes Usability yes Contact Tom Judge Where Cold Metals Area Authorization Needed yes Hackable no Estimated Value $400 Host Area

1 KB (176 words) - 16:50, 16 August 2017
Vote to Purchase a Pneumatic Power Hammer
contained unit meaning it will run off the air lines running through Hot Metals. This unit was chosen because it had one of the lowest air requirements

3 KB (451 words) - 23:30, 17 December 2019
Board Meeting Notes 2023-05-16
Has been signed. James will put it in the board drive. It is hosted in Hot Metals Ryan volunteer position. All on board Board resolution letter for bank.

3 KB (349 words) - 01:14, 17 May 2023
Board Meeting Notes 2015-03-17
Shae, Chris, Everett, Trygve, Arturo, Mac, Joe for Lounge work. Opened Hot Metals Volunteer Authorizer position. Approved Corliss Early College STEM High

3 KB (469 words) - 01:46, 18 March 2015
Meeting Notes 2016-11-22
empty the dust-collector, sweep, clean up after yourself Whoever moved hot metals And whoever put the curtains (Ron? Niko? And their merry band?) Brian for

3 KB (347 words) - 03:35, 23 November 2016
Vote to Buy a TIG Welder
of users, while being small enough to fit in the limited space of the Hot Metals area. Also, this machine has the benefit of having more information up-front

3 KB (429 words) - 01:37, 22 July 2015
Meeting Notes 2016-02-02
Anna - Electronics Area Host Dean - Machine Shop Arturo - Kitchen Ron - Hot Metals Triano - Woodworking Area Host Shae - Toolcage Area Host Erik - General

3 KB (350 words) - 15:48, 3 February 2016
Meeting Notes 2016-02-09
Learned about PS1 from Andy, came to grand opening in 2009 Aushra Works on metals, used knitting machines. Would like to incorporate electronics with both

3 KB (358 words) - 17:54, 10 February 2016
Meeting Notes 2016-02-23
Secretary Anna - Electronics Area Host Erik - General Area Host Ron - Hot Metals Area Host Triano - Woodshop Area Host Anna | Machining & woodworking, electronics

3 KB (359 words) - 02:27, 24 February 2016
Meeting Notes 2012-01-10
get in to wood and metal working. Christie wanted to check out the place. Ruben does software but want to socialize and work with metal and wood and lasers

2 KB (270 words) - 20:44, 29 March 2014
Board Meeting Notes 2012-06-19
of our meetings and introduce themselves. Dan purchased a metal chop saw because cutting metal on the wood chop saw and would like to be reimbursed. Dan

2 KB (264 words) - 18:50, 29 March 2014
Initial Shop Tidy Space
property. Will be labeled with a tool tag and moved into hot metals. -- Bry Moved into hot metals. --Bry Picture: Item description: Outside has: Power racing

16 KB (2,281 words) - 00:13, 18 March 2014
Tidy Space Policy
General Area Temporary Storage; Salvage Small Metals TBD Cold Metals Salvage; Sort-Me Zone (drill bits) Hot Metals Temporary Storage; Salvage Woodshop Temporary

14 KB (2,163 words) - 16:51, 22 December 2022
Area Host Meeting Notes 05-07-2013
start: 9:10 In attendance: eric adrianna hailey colin anna tucker (proxy metal host for mike) farkas ed kathy geoffrey josh matt triano jay jim burke Prereqs:

2 KB (351 words) - 15:40, 29 March 2014
Board Meeting Notes 2022-08-02
toilets got fixed, AC in woodshop got some love and care. doall bandsaw (cold metals) needs more looking into "bad voltage" means it isn't runnable at the moment

3 KB (415 words) - 00:41, 3 August 2022
CNC Plasma Cutter Vote
(especially for wood and soft metals), to round out our capabilities we'd like to propose CNC cutting of large sheet metal and plate. Adding a CNC plasma

4 KB (559 words) - 23:47, 13 March 2016
Compressed air updates 072017
and into dock Re-hose existing reels with rubber hose Move drop from small metals to ceiling above general shop area add electric reels at general work table

4 KB (579 words) - 20:42, 7 July 2017
2016 Budget Vote
Kitchen Area $1,500 Electronics Area $4,700 Machine Shop Area $5,600 Hot Metals Area $4,300 Tool Cage Area $3,000 Arts, Crafts, & Textiles Area $2,500 Woodshop

4 KB (457 words) - 21:36, 3 February 2016
Meeting Notes 2014-05-06
(hopefully) need some help getting new IT hardware set up in a few weeks. New hot metals area host - Tom Judge! PC Hardware Vote 2014 will be voted on 2014-05-13

3 KB (552 words) - 01:29, 7 May 2014
Board Meeting Notes 2015-02-10
Purchases: 2140: Merge to previous request by Shellie 2148: Invoice for cold metals purchase for mill chucks, collets, etc. 1852, 1853: Doorman Dave to work

3 KB (513 words) - 01:48, 11 February 2015
Board Meeting Notes 2014-02-11
Steve's on it Reimburse Skilton for hot metal electrical vote - Steve's on it Reimburse skilton for hot metals area purchases - Steve's on it Area host

4 KB (513 words) - 19:04, 29 March 2014
Board Meeting Notes 2015-02-17
See Votes below. Board meeting closed at: 7:57 PM Ron Olson appointed Hot Metals Area Host. Michelle Deleon appointed Tool Cage Area Host.

4 KB (548 words) - 02:30, 18 February 2015
Board Meeting Notes 2020-06-02
will install on Wednesday -Got an HVAC repair person to look at the cold metals ac unit, including the rooftop compressor; he will give us two quotes on

4 KB (543 words) - 00:53, 8 July 2020
Main Page R2
create an event? PS:One Electronics Lab Reservation Calendar PS:One Hot Metals Calendar How to do things, where to get things, what's in the area, and

5 KB (52 words) - 17:16, 10 June 2016
Meeting Notes 2014-05-13
callouts! Dean continues to be awesome in cold metals. Ed and Anna and Ryan have been doing the tier 1 cold metal certs! Jenny and Pete are working on cleaning

3 KB (548 words) - 07:33, 24 December 2014
2021 Air Compressor Vote
compressed air for their tools to run correctly (or at all), including: Hot metals: blast cabinet and plasma cutter Lasers: all of them Tormach milling machine

4 KB (628 words) - 02:40, 18 September 2021
Board Meeting Notes 2015-02-24
Will give to Shellie. 2202: Same subject, merge with 2003. 2197: Dean, cold metals reimbursement. Tom handling. 2203: Moved to QuickBooks. 2047: Still waiting

4 KB (538 words) - 02:07, 4 March 2015
Board Meeting Notes 2018-07-17
Skilton Who is sponsoring this removal? I'm posting this on behalf of the Hot Metals area host. What is it? A MIFCO Speedy Forge model F526 Where did it come

3 KB (446 words) - 03:38, 19 July 2018
Meeting Notes 2016-01-05
- Don't dumping unidentifiable gooey things in the shop sink in the hot metals area Everett - We don't know where it goes so don't put anything toxic down

3 KB (429 words) - 02:41, 6 January 2016
Vote to Update Tidy Space Policy (2019)
the discretion of the Area Host. (See Sort-Me Box by Drill Press in Cold Metals for example.) -Create "Temporary Storage" where current "Wut Zone" areas

3 KB (480 words) - 14:50, 24 April 2019
Board Meeting Notes 2020-10-20
their way (hot water loop) Pump maintenance on schedule for next week Small Metals - Request for new volunteer - waiting on response from Ella Bylaws update

3 KB (424 words) - 04:19, 22 October 2020
Sources (section Metal Working)
St, Chicago MetalsDepot — A source for metals, all kinds and shapes, no minimums. Location: Winchester, KY Midwest Steel - A source for metals, all shapes

44 KB (4,419 words) - 16:02, 9 November 2022
Board Meeting Notes 2012-09-11
implemented. Tim discussed the plans for further build-out of the wood shop and metal shop. We need to create a bill-of-materials for the build-out. We need some

3 KB (411 words) - 18:52, 29 March 2014
Board Meeting Notes 2012-09-25
address update. We need to verify the code status of the fire door in the metal shop We need to improve our implementation of the tool certification process

3 KB (432 words) - 18:53, 29 March 2014
Board Meeting Notes 2012-12-18
to Shawn and Steve Dan suggested going with Metal Halide bulbs. Jeff gets a really good discount on the metal halide fixtures and bulbs. Shawn has been having

3 KB (419 words) - 18:55, 29 March 2014
2019 Surveillance Camera Policy and Anti-Theft Budget Vote
to record in Hot Metals, which has not yet been installed. One interview subject disagreed with the decision to record in Hot Metals. This vote explicitly

17 KB (2,726 words) - 02:06, 18 December 2019
Board Meeting Notes 2015-03-03
additional Cold Metal Volunteer Authorizer position. Pinging Jabu and Andrew to inquire whether more Authorizers are needed in Cold Metals and Shopbot backlog

4 KB (571 words) - 01:58, 4 March 2015
Meeting Notes 2015-10-20
woodshop authorizers available tonight and/or some time this week? (yes) Hot metals authorizer tonight? (yes) Volunteer to run a tour: Ron. Yay. Thanks Ron

3 KB (457 words) - 14:45, 21 October 2015
Board Meeting Notes 2015-04-07
Needs a check. Deferred. 2511 - Reimbures Dean for drill press from Cold Metals budget. Done. 2512 - Reimburse Dean for electrical plugs. Done. 2513 - Reimburse

4 KB (562 words) - 00:50, 8 April 2015
Meeting Notes 2016-04-05
donated two vegan pizzas Peter Lau got soda pop Lauren for doing a great hot metals workshop Justin taught making buttons Everybody who brought goodies for

4 KB (523 words) - 01:40, 6 April 2016
Meeting Notes 2016-05-24
knows metal fabrication, works in a cnc machine shop, trying to get into arduino, etc. Pat | works with metal, wood | learned about us from the metal super

4 KB (536 words) - 01:49, 25 May 2016
Board Meeting Notes 2022-07-05
the Treasury team. Eric Beauchamp Area Host Review Wednesday at 8PM Small metals area host review Still trying to get in touch with the Area host. They seem

3 KB (477 words) - 00:53, 6 July 2022
Board Meeting Notes 2019-11-05
" Then the next week, you're supposed to lock. 2 new authorizers in hot metals have been approved. members suggested by Molly and Andrew Morris by general

4 KB (491 words) - 02:35, 6 November 2019
Board Meeting Notes 2021-03-02
update plans of building. Dave and Andrew to discuss for organization of cold metals with Jim. Desire from Ash for improved venting. TECH TEAM: David, Aushra

3 KB (450 words) - 04:48, 17 March 2021
Pen turning
parts containing the hardware. These usually are constructed by gluing a metal tube into the wood and turning this in the lathe on a mandrel. PS:One has

13 KB (2,220 words) - 16:07, 17 March 2024
Hot metal electrical
receipts will be linked below. File:Ps1 hot metal electrical 1.pdf File:Ps1 hot metal electrical 2.pdf File:Ps1 hot metal electrical 3.pdf

1 KB (151 words) - 00:13, 18 March 2014
D. Wexler & Sons (metal supplier)
One. You can also call them, they're very friendly and answer questions. Metal sold — A36 steel only. Available in most shapes. They're a small and friendly

914 bytes (141 words) - 00:09, 18 March 2014
48in sheet metal brake maintenance
(notches, bent corners etc.) If the damage may cause impressions in the bent metal, the raised edge should be flattened with a whet-stone. If damage is severe

1 KB (91 words) - 02:56, 1 June 2018
Board Meeting Notes 2020-03-17
bulbs installed in woodshop; will order LED’s for the general area and cold metals Set for building inspection if it ever occurs Aushra: grant Gary access

4 KB (540 words) - 20:25, 8 April 2020
Meeting Notes 2016-09-06
Director at Large, Purple, and Wiiiiiild Events Simon - President Ron - Hot Metals Area Host Anna - Electronics Area Host Andrew - CNC Area Host Michael -

4 KB (597 words) - 02:10, 7 September 2016
Board Meeting Notes 2016-12-06
budget and need a board vote approval Socket set purchased by Ron for hot metals was billed to tool cage is only expenditure post tool cage dissolution Buildout

4 KB (523 words) - 10:06, 20 December 2016
Meeting Notes 2016-04-26
vice-president Simon - Secretary Anna - electronics area host Ron - hot metals Area host Andrew - CNC area host Andrew C. would like some help getting

4 KB (545 words) - 02:11, 27 April 2016
Delta Drill Press (8in)
gloves when drilling: A. Into sheet metal that can easily cut you B. When you don’t want to get splinters C. Into metal bar stock that becomes hot to prevent

8 KB (1,180 words) - 23:25, 14 June 2014
Leica S430 Scanning Electron Microscope
trap and sanded interior metal surfaces. (The plastic surfaces are filthy, but I don't know how to clean this.) Cleaned all metal parts in 3 progressive

20 KB (1,594 words) - 23:46, 4 November 2021
Grizzly Mini Metal Lathe (7in x 12in) maintenance
The Grizzly Lathe should be lubricated daily, or at least as often as it is used. Please refer to the [manual] for the correct lubrication instructions

2 KB (122 words) - 02:55, 1 June 2018
Meeting Notes 2016-07-05
Purple & Wild Events Simon - Secretary Anna - Electronics Area Host Ron - Hot Metals Area Host Shellie - Arts & Crafts & Creative Stuff &c Area Host Take out

5 KB (656 words) - 03:13, 6 July 2016
Board Meeting Notes 2020-01-07
approval and to prepare application form Pushed to Next Meeting New Small Metals area host needed Alex asked for a list of duties from Aushra Alex to post

4 KB (628 words) - 03:46, 8 January 2020
Meeting Notes 2016-03-08
President Erik - General Area Host Anna - electronics area host Ron - Hot Metals Area Host Matt Triano - woodshop area host Andrew - CNC area host Arturo

4 KB (606 words) - 13:19, 9 March 2016
Meeting Notes 2016-06-07
programming, hardware just wants to learn stuff - Jay Aushra - jewlery/small metals, knitting machines, electronics(future) - the internets- googled something

4 KB (626 words) - 02:07, 8 June 2016
Spokeshave
Historically, a spokeshave was made with a wooden body and metal cutting blade. With industrialization metal bodies displaced wood in mass-produced tools. " --wikipedia

837 bytes (80 words) - 19:03, 17 December 2021
Board Meeting Notes 2013-12-03
discuss hot metal areas budget. Ryan wants a reimbursement. We haven't yet done the transactions into the budgets yet. This owuld be under metal area, Mike's

4 KB (687 words) - 19:03, 29 March 2014
3519 Electrical Work (section Metal Shop)
cords issue. The circuit that goes along the shop side of the shop (wood, metal) with the really long conduit, is one circuit. It trips sometimes if people

2 KB (259 words) - 14:13, 17 March 2014
Meeting Notes 2016-12-06
and willld events Simon - secretary Michael - director at large Ron - hot metals Please close the back door, especially at night (and turn off the lights)

5 KB (694 words) - 02:50, 7 December 2016
Tidy Space Tickets Expiring March 22 2013 (section Middle Wood/Metal Shelf)
limbo: 03/22/2014 Possible owner: ?? Note: Picture: Item description: Grey metal box with foam in it. Date item will be moved to limbo: 03/22/2014 Possible

3 KB (310 words) - 00:32, 18 March 2014
Meeting Notes 2016-02-16
woodworking, metal etc. | was looking for Zach | art, metal, computer vision | Todd | Code | Found us on hackaday Keith | handy, sheet metal, plumber, made

5 KB (707 words) - 01:45, 24 February 2016
Meeting Notes 2017-01-03
Director at Purple and Willld Events Erik - General Area Host Dean - Cold Metals Area Host Make nominations for the board! Take out the garbage, clean up

6 KB (835 words) - 05:13, 4 January 2017
Vote to Buy a new CNC Plasma Machine
supplies, etc. As it stands, the 2021 year ended with only $60 left in the Hot Metals budget. Yes, we can replace all the electronics, weld cross-bracing to the

4 KB (647 words) - 23:46, 16 January 2022
Oris Color Tuner Raster Image Processor (RIP)
Examples: hostarea=CNC or hostarea=General or hostarea=Kitchen or hostarea=Cold Metals There are 9 currently valid Hosted Area names. Could someone please add

4 KB (690 words) - 00:21, 13 February 2023
MIG welders
fine, upstanding citizen you are. Put away anything else you got out, like metals, gloves, face mask, clamps, magnets, etc. Wear natural fibers (cotton, wool)

5 KB (871 words) - 01:41, 26 December 2017
Board Meeting Notes 2016-07-19
send the donation letter request form Donation Letter Request Form Hot Metals: Ron Crafts: Shellie Electronics: Anna General Space: Erik Would it be worth

6 KB (702 words) - 02:12, 27 July 2016
Board Meeting Notes 2023-02-21
positions are. Reports from Committees Gen Ops New motor fit to heater in Cold Metals, waiting on parts to hook it up When this is done we will have 3 heaters

5 KB (732 words) - 02:06, 22 February 2023
Grizzly 6" jointer
for nails or staples. If you're not sure, check the entire piece with the metal detector or a magnet. Remove the smallest amount of material possible and

11 KB (315 words) - 18:29, 29 February 2020
Meeting Notes 2009-01-13
Committees Sacha will organize reprap committee IT â Zane & JR PR Nat â Heavy Metal Objects. Checks payable to âPumping Station: One, NFPâ

1 KB (163 words) - 20:21, 29 March 2014
Vote For Casting Equipment
cast custom metal parts. Tom Judge http://en.wikipedia.org/wiki/Lost-wax_casting PS1 currently owns some equipment that would be useful for metal casting.

3 KB (280 words) - 05:01, 31 March 2015
Tidy Space Tickets Expiring November 15 2013 (section Heater work Metal)
(talk) 18:34, 15 December 2013 (CST) Picture: Item description: Bunch of Metal Date item will be moved to limbo: 11/15/13 Possible owner: PS:1, Tony the

14 KB (1,762 words) - 00:31, 18 March 2014
Jointer Grizzly 8 inch
for nails or staples. If you're not sure, check the entire piece with the metal detector or a magnet. Remove the smallest amount of material possible and

1 KB (211 words) - 17:08, 10 December 2022
Meeting Notes 2012-06-26
for the doors. Dan got a really nifty saw for the space that cuts through metal and a bunch of other hard-to-saw things. Talk to Dan about getting certified

2 KB (257 words) - 20:48, 29 March 2014
Board Meeting Notes 2016-03-15
order business cards Jennie to collect Ron's key to donation box - DONE Hot metals key was at the board meeting [RT4350] Jennie to reply (and include Ray's

7 KB (891 words) - 02:03, 29 March 2016
Board Meeting Notes 2016-07-05
authorizor Voted unanimously to appoint Ken as wood shop authorizer and Jeremy as Metals Authorizer

7 KB (953 words) - 04:19, 6 July 2016
StepMania Arcade Machine
have a space, so we have a place to put it. I suggest making or ordering metal dance pads and not using the soft ones. I have a soft pad for Pump It Up

964 bytes (145 words) - 00:28, 18 March 2014
Wood shop tip lists
this tool. USE FOR WOOD ONLY. Please use the drill press in Small Metals for drilling metal. Do not use oil or other cutting fluids on this drill press. Oil

6 KB (1,149 words) - 15:49, 9 October 2018
Vote to Refresh PS:One Server Hardware
TL-SG1024 10/100/1000Mbps Unmanaged 24-Port Gigabit rackmountable Switch, Metal Case, Power-Saving $97.99 TRIPP LITE LCR2400 Line Conditioner $260 Total

2 KB (227 words) - 14:13, 27 April 2015
Meeting Notes 2016-01-19
arduino - Conrad Burt - CNC, metal works, carburator - CNC operations Justin Ray Lyn Jenny Arturo Dean Anna Ron Erik Shae JP - metal working, social skills,

7 KB (1,042 words) - 19:52, 26 January 2016
Board Meeting Notes 2012-09-04
temperature Lighting Separate the kitchen and cnc tools. Separating the wood and metal shops are less pressing, not sure how to evaluate how much space it needs

2 KB (248 words) - 18:52, 29 March 2014
Meeting Notes 2011-05-24
wants to learn programming kaytlen, Educator by trade, marketeing by day, metal worker by night. Dave, video game developers, wants more tech skills. Monica

2 KB (260 words) - 20:39, 29 March 2014

(Main)	Talk
User	User talk
Pumping Station One	Pumping Station One talk
File	File talk

MediaWiki	MediaWiki talk
Template	Template talk
Help	Help talk
Category	Category talk

Property	Property talk
Concept	Concept talk
smw/schema	smw/schema talk
Rule	Rule talk

BPMN	BPMN talk
Gantt	Gantt talk
Mermaid	Mermaid talk
Module	Module talk

Gadget	Gadget talk
Gadget definition	Gadget definition talk

Anonymous

Search

Search results

Namespaces

More

Page actions

Navigation

Navigation

Wiki tools

Wiki tools

Anonymous

Search

Search results

Search in namespaces:

Navigation

Wiki tools

Page tools